HT1386 ITUNES KEEPS ASKING TO AUTHORIZE COMPUTER BY DOING THIS IT THAN SAYS COMPUTER AUTHORIZED ALREADY AND STOPS SYNC SAYING ALREADY AUTHORIZED FOR 5 COMPUTERS BUT THE COMPUTER WAS INSTALLED WITH ITUNES A FEW TIMES BECAUSE IT WAS REINSTALLED WITH WINDOWS

HI I CANNOTSYNC MY IPHONE TO MY COMPUTER. ITUNES ASKS ME TO AUTHORIZE COMPUTER.
ONCE THIS IS DONE THE NEXT MESSAGE IS COMPUTER IS AUTHORIZED.SYNC STARTS AND THE NEXT MESSAGE IS THAT
THE COMPUTER IS ALREADY AUTHORIZED FOR MAX OF 5. THIS COMPUTER HAS IN THE PASS BEEN REPAIRED WITH WINDOWS BEING
REINSTALLED SO ITUNES WAS ALSO REINSTALLED .WHAT CAN I DO TO RESTORE MY BACKUP FOR MY IPHONE 5S THAT I JUST PURCHASED

Hey Mohamed Akhtar,
Thanks for the question. To troubleshoot this issue, you may want to try deauthorizing all computers:
iTunes Store: About authorization and deauthorization
http://support.apple.com/kb/HT1420
To deauthorize all computers associated with your Apple ID
If you need to authorize your new computer and are unable due to already having five authorized computers, you can deauthorize all computers by doing the following:
1. Click iTunes Store on the left side of iTunes.
2. If you're not signed in to the store, click the Account button, then enter your account name and password.
3. Click the Account button again (your Apple ID appears on the button), enter your password, and then click View Account.
4. In the Account Information window, click Deauthorize All.
Note: You may only use this feature once per year. The Deauthorize All button will not appear if you have fewer than two authorized computers. If you need assistance on using this feature, please contact iTunes Store support via email (http://www.apple.com/support/itunes/store/).
If you continue to have issues, you may want to see the steps in this article:
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/TS1389
Thanks,
Matt M.

Similar Messages

My new computer is authorized and home sharing is turned on for both computers, but the Shared section is no longer showing up on either computer. What do I do now?

I am not sure how to view the Shared section on either computer. It says the new computer will open it once it finds my other computer, or something like that, and I do not know why it is not finding it. Basically, I do not know what to do at this point.

If you have the horizontal menu bar showing (File, Edit, View,...), select View, then select Show Sidebar.
If the menu bar is not showing, dorp down the menu in the very upper left corner and select show menu bar, then follow steps above.
Hope that helps. Good luck.

Keeps asking to authorize computer

keeps asking to authorize computer to play a song and still wont play it

My Problem solved. At some point many years ago a duplicate account was made, same info, same password the only difference was a capital letter in the user ID. The account had not been used in so long that it had been deauthorized by apple. I put in a call to apple iphone support and they contacted itunes and fixed the problem. The funny thing is, itunes support could not find the account I use and have been using the past 6 years. Oh well. Problem solved. Oh I found the duplicate account because someone suggested comparing the songs that would not play and the songs closest to them that would play, study the songs info line by line looking for ANY difference.
Thanks Katrina for the suggestions, if not I would have never noticed that one capital N that made all the difference.

HT1491 I have purchased Dhingana for 1 month , But the songs was not downloaded .kindly explain why it was not downloaded

I have purchased Dhingana for 1 month , But the songs was not downloaded .kindly explain why it was not downloaded. I will try many times

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

TS5181 I was supposedly refunded for a song but the money was never given back to me

I was supposedly refunded for a song that I didn't mean to purchase but the money was not given back to me

We are fellow users here on these forums. If you haven't received a refund or credit that you were told that you would receive then you will need to contact iTunes Support again (and if you have the case number from your original contact then include that) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

TS1389 song won't play - keeps asking to authorize computer

just bought 6 new songs. only one won't play. keep asking me to authorize the computer. all the other songs & previous songs are fine. how do i get the song to play?

Click here and follow the instructions.
(64322)

Problem starting up portal after my computer was upgraded to Windows XP SP2 and security lockdown

Recently our computers in the office was upgraded to Windows XP SP2, and the portal in my local machine stopped working. It was working prior to the upgrade. When I start up the portal I get this error in PTSpy. Please help, I need this portal instance to work on UI Customization. Thank you in advance.
***Saving log at 10:15:28 on September 08. TRACE DATE TIME TYPE COMPONENT PROCESS THREAD LOCATION MESSAGE ===== ==== ==== ==== ========= ======= ====== ======== ======= 825 09-08 10:13:22 Fatal Portal UI - Infrastructure 2276 6012 com.plumtree.portaluiinfrastructure.application.PTAppWarmUpHelper.LoadCustomVarPacks() Error creating directory var pack.
System.Runtime.InteropServices.COMException
at com.plumtree.server.InProcSession..ctor()
at com.plumtree.server.PortalObjectsFactory.CreateSession()
at com.plumtree.portaluiinfrastructure.application.varpacks.PTDirPrefsVarPack.Load()
at com.plumtree.uiinfrastructure.web.BaseVarPack.LoadVarPack(String strConfigPath)
at com.plumtree.portaluiinfrastructure.application.PTAppWarmUpHelper.LoadCustomVarPacks(VarPackManager vpmVarPackManager, String strSettingsConfigFolder, String strPlatform) 826 09-08 10:13:22 Fatal UI Infrastructure 2276 6012 com.plumtree.uiinfrastructure.application.AppWarmUp.Init() Failed to load var packs from custom app warm up helper.
com.plumtree.openfoundation.util.XPException
at com.plumtree.server.InProcSession..ctor()
at com.plumtree.server.PortalObjectsFactory.CreateSession()
at com.plumtree.portaluiinfrastructure.application.varpacks.PTDirPrefsVarPack.Load()
at com.plumtree.uiinfrastructure.web.BaseVarPack.LoadVarPack(String strConfigPath)
at com.plumtree.portaluiinfrastructure.application.PTAppWarmUpHelper.LoadCustomVarPacks(VarPackManager vpmVarPackManager, String strSettingsConfigFolder, String strPlatform) at System.Environment.GetStackTrace(Exception e)
at System.Environment.GetStackTrace(Exception e)
at System.Environment.get_StackTrace()
at com.plumtree.openfoundation.util.XPException.GetInstance(Exception e)
at com.plumtree.portaluiinfrastructure.application.PTAppWarmUpHelper.LoadCustomVarPacks(VarPackManager vpmVarPackManager, String strSettingsConfigFolder, String strPlatform)
at com.plumtree.uiinfrastructure.application.AppWarmUp.Init(String strVarPackXMLFile, String strApplicationName, String _strPlatform)
at com.plumtree.portaluiinfrastructure.application.ApplicationStartup.init()
at portal50.Global.Application_Start(Object sender, EventArgs e)
at System.Reflection.RuntimeMethodInfo.InternalInvoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean isBinderDefault, Assembly caller, Boolean verifyAccess)
at System.Reflection.RuntimeMethodInfo.InternalInvoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean verifyAccess)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at System.Web.HttpApplication.ProcessSpecialRequest(HttpContext context, MethodInfo method, Int32 paramCount, Object eventSource, EventArgs eventArgs, HttpSessionState session)
at System.Web.HttpApplicationFactory.FireApplicationOnStart(HttpContext context)
at System.Web.HttpApplicationFactory.Init(HttpContext context)
at System.Web.HttpApplicationFactory.GetApplicationInstance(HttpContext context)
at System.Web.HttpRuntime.ProcessRequestInternal(HttpWorkerRequest wr)
at System.Web.HttpRuntime.ProcessRequest(HttpWorkerRequest wr)
at System.Web.Hosting.ISAPIRuntime.ProcessRequest(IntPtr ecb, Int32 iWRType) 827 09-08 10:13:22 Fatal UI Infrastructure 2276 6012 com.plumtree.uiinfrastructure.application.AppWarmUp.Init() FAILED TO INITIALIZE SYSTEM. YOU CANNOT PROGRESS BEYOND THIS POINT.
com.plumtree.openfoundation.util.XPException
at com.plumtree.server.InProcSession..ctor()
at com.plumtree.server.PortalObjectsFactory.CreateSession()
at com.plumtree.portaluiinfrastructure.application.varpacks.PTDirPrefsVarPack.Load()
at com.plumtree.uiinfrastructure.web.BaseVarPack.LoadVarPack(String strConfigPath)
at com.plumtree.portaluiinfrastructure.application.PTAppWarmUpHelper.LoadCustomVarPacks(VarPackManager vpmVarPackManager, String strSettingsConfigFolder, String strPlatform) at System.Environment.GetStackTrace(Exception e)
at System.Environment.GetStackTrace(Exception e)
at System.Environment.get_StackTrace()
at com.plumtree.openfoundation.util.XPException.GetInstance(Exception e)
at com.plumtree.portaluiinfrastructure.application.PTAppWarmUpHelper.LoadCustomVarPacks(VarPackManager vpmVarPackManager, String strSettingsConfigFolder, String strPlatform)
at com.plumtree.uiinfrastructure.application.AppWarmUp.Init(String strVarPackXMLFile, String strApplicationName, String _strPlatform)
at com.plumtree.portaluiinfrastructure.application.ApplicationStartup.init()
at portal50.Global.Application_Start(Object sender, EventArgs e)
at System.Reflection.RuntimeMethodInfo.InternalInvoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean isBinderDefault, Assembly caller, Boolean verifyAccess)
at System.Reflection.RuntimeMethodInfo.InternalInvoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean verifyAccess)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at System.Web.HttpApplication.ProcessSpecialRequest(HttpContext context, MethodInfo method, Int32 paramCount, Object eventSource, EventArgs eventArgs, HttpSessionState session)
at System.Web.HttpApplicationFactory.FireApplicationOnStart(HttpContext context)
at System.Web.HttpApplicationFactory.Init(HttpContext context)
at System.Web.HttpApplicationFactory.GetApplicationInstance(HttpContext context)
at System.Web.HttpRuntime.ProcessRequestInternal(HttpWorkerRequest wr)
at System.Web.HttpRuntime.ProcessRequest(HttpWorkerRequest wr)
at System.Web.Hosting.ISAPIRuntime.ProcessRequest(IntPtr ecb, Int32 iWRType)

I'm having a very similar issue with the G6 customization install (XP SP2, .NET version of G6).
failureFATAL: LoadCustomVarPacks: Varpack loading problem. recommendationRECOMMENDATION: Verify your reference path is correct. Check that the relevant .NET assemblies in the customvarpacks.xml file are present in both PORTAL_HOME/bin/assemblies as well as PORTAL_HOME/webapp/portal/web/bin. Check secondary details below. exceptionXPFileNotFoundExceptionHelperLoadVarPacks: Unable to load VarPack. messageHelperLoadVarPacks: Unable to load VarPack. secondary exceptionat com.plumtree.uiinfrastructure.application.AppWarmUp.HelperLoadVarPacks(String strVarPackFile, String strLibHomePath, String strConfigPath, IApplication application, Boolean bOverWrite) in e:\buildroot\Release\uiinfrastructure\6.0.x\dotnet\prod\src\com\plumtree\uiinfrastructure\application\AppWarmUp.cs:line 432
I checked the directories and both sets of DLLs are in place and show they match. I also appended (right or wrong) the ptportal_path, portal_home, and source_home paths to my environment. Current path looks like
%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;%SystemRoot%\system32\nls;%SystemRoot%\system32\nls\ENGLISH;C:\Program Files\Microsoft SQL Server\80\Tools\BINN;C:\WINDOWS\Microsoft.NET\Framework\v1.1.4322;%ANT_HOME%\bin;%JAVA_HOME%\bin;%PORTALLIB_PATH%;%PTHREADS_PATH%;%OUTSIDEIN_PATH%;%INXIGHT_PATH%;%ICU_PATH%;%ptportal_path%;%portal_home%;%SOURCE_HOME%;
Any help / direction / suggestions most appreciated.
Thanks,
Eric

HT3819 I have turned Home Sharing on on two computers, but the "Shared" area is not appearing on either computer. What does this mean? What do I do? THANKS!

I have turned Home Sharing on for two computers, but the "Shared" area is not appearing on either computer. What does this mean? What do I do? I am trying to get music from one library into another library to sync with my ipod so that I can have all songs on the ipod from both libraries.
Thank you for your help!

If you have the horizontal menu bar showing (File, Edit, View,...), select View, then select Show Sidebar.
If the menu bar is not showing, dorp down the menu in the very upper left corner and select show menu bar, then follow steps above.
Hope that helps. Good luck.

New hard drive installed in Mac. iTunes keeps asking to authorize a very old email address which is not associated with my iPhone and I cannot sync iTunes to my iPhone.

New hard drive installed in Mac. iTunes keeps asking to authorize a very old email address which is not associated with my iPhone and I cannot sync iTunes to my iPhone.

It is referring to purchases made using an Apple ID that was set with that email as the Apple ID. Did you simply create a new Apple ID when the old email address was no longer being used? If so, then that old Apple ID is still tied (and will always be tied) to the purchases made with it, and you will have to sign into iTunes with that Apple ID in order to authorize the computer to it.
If you don't remember the password for it, you can go to Manage your Apple ID and click on Reset password. If you don't remember the answers to your Security Questions, you can contact Apple Support to get them reset:
ACCOUNT SECURITY CONTACT NUMBERS
Cheers,
GB

Unable to sync iPad keep asking to authorize the computer

I can't synchronize my iPad with my computer. Keep asking to authorize the iPad in order to synchronize.
Each time I authorize and then validate. After syncing it keeps asking again and again.
I have authorized only 1 computer out of 5.
What to do? I want to get my photos onto my iPad
Thanks

Authorization
iTunes Store- Authorize or deauthorize your Mac or PC.
In iTunes you use the Authorize This Computer or De-authorize This Computer option under the Store menu in iTunes' menubar. For Windows use the ALT-S keys to access it. Or turn on Windows 7 and 8 iTunes menus: iTunes- Turning on iTunes menus in Windows 8 and 7.
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases

Hi I bought a new iPhone 4 with iOS 6.1.3 installed. When I connected it to itunes for the first time to activate it iTunes asked me to enter the password for an account that the iPhone is locked with what shall I do? PLease help

Hello everybody
I bought a new iPhone 4 with iOS 6.1.3 installed. When I connected it to itunes for the first time to activate it iTunes asked me to enter the password for an account that the iPhone is locked to like if the device was used before what shall I do? PLease reply soon

I can't do that because the device was purchased from United Arab Emirates and I got it as a gift in Syria but the problem is that there is not even a single apple store in Syria so is there another way to fix that, I googled it and was told to jailbreak the device whitch I did and than hacktivated it but the problem is the device doesn't connect to any network and only shows "no service" and the battery draining too fast so is there any other way to fix this issue

HT1848 i used to download app using my freind ID nw i get mine so i try to sync wiz itunes in lap it ask me to authorize and it already authorized but keep asking to authorize ???? what shall i do ?

i used to download app using my freind ID nw i get mine so i try to sync wiz itunes in lap it ask me to authorize and it already authorized but keep asking to authorize ???? what shall i do ?

Any content that your friend downloaded will be tied to their account - so if you want to sync to your computer's iTunes and keep that content then you will need to authorise your friend's account, and you only be able to download updates to their apps via their account. You should delete the apps and buy/download your own copies of them.

Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click w

Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click with the tool "hand" to fit on the screen, but the picture loses sharpness and becomes blurry. If you magnify the image even only slightly with the tool "zoom" the picture comes back clear. In Camera Raw instead is always sharp. I solve the problem by turning off the graphics card in PS but often use plugin that need the graphics card otherwise the processing time is much longer. I ask for help.
Thanks.

Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click with the tool "hand" to fit on the screen, but the picture loses sharpness and becomes blurry. If you magnify the image even only slightly with the tool "zoom" the picture comes back clear. In Camera Raw instead is always sharp. I solve the problem by turning off the graphics card in PS but often use plugin that need the graphics card otherwise the processing time is much longer. I ask for help.
Thanks.

Hey! I don't know if my MacBook Air is frozen, but the screen is gray with the apple logo and an icon below turning round and round as if it's opening, but has been like that for a few days. I've switched it off and then on again several times, still the

Hey
I don't know if my mac book air is frozen, but the screen is gray with the apple logo in the middle of the gray screen, with the 'booting' icon turning round and round. I have switched it off fron both the power and power button on the computer, it goes off, when I put it on, same screen comes on again. Help Please!

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 3
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 4
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 5
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 6
Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 6.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 7
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 8
Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 9
Repeat Step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
Step 10
This step applies only to older Macs (not current models) that have a logic-board ("PRAM") battery. Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a boot failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 11
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

I have problem with my wifi in 4 S, i cant connect to any wifi itried resetting network setting and reset all setting but the result was the same, its only keeps searching for wifi and cant find any, itried to use OTHER but also didnt work.please help me

i have problem with my wifi in 4 S, i cant connect to any wifi itried resetting network setting and reset all setting but the result was the same, its only keeps searching for wifi and cant find any, itried to use OTHER but also didnt work.please help me???

If Join was on then your home wi-fi must be set to Non-Broadcast. If you did not set this up (maybe your provider did) then you will need to find the Network Name they used, and any password they used. The SSID is Security Set ID and to see more try http://en.wikipedia.org/wiki/SSID . Basically it is the name used to identify your router/network. A lot of times the installer will leave it set as LinkSys, or Broadcom or whatever the manufacturer set it as for default. Your best bet is to get whoever installed it to walk you through how they set it up, giving you id's and passwords so you can get in. HOWEVER, if you are not comfortable with this (if you set security wrong, etc.) you would be well ahead of the game to hire a local computer tech (networking) to get this working for you. You can also contact the vendor of your router and get help (if it is still in warranty), or at least get copies of the manuals as pdf files. Sorry I can't give you more help, I hope this gives you an idea where to go from here to find more.

HT1386 ITUNES KEEPS ASKING TO AUTHORIZE COMPUTER BY DOING THIS IT THAN SAYS COMPUTER AUTHORIZED ALREADY AND STOPS SYNC SAYING ALREADY AUTHORIZED FOR 5 COMPUTERS BUT THE COMPUTER WAS INSTALLED WITH ITUNES A FEW TIMES BECAUSE IT WAS REINSTALLED WITH WINDOWS

Similar Messages

Maybe you are looking for