HT1386 my ipod generation 1, is disabled... please help..
my ipod touch is disabled can anyone help?
its a generation 1
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Similar Messages
-
HT1430 my ipod 4 is disabled.Please help!!
IPOD IS DIsabled.Please help!!!!
Recovery mode will work. BUT if your like most people you probably dont want to lose all your information. Sometimes if you just plug your ipod into a computer you have used before it will just unlock it for you! Sometimes if that doesnt work you can try to just back up your stuff to your computer unless you already have your stuff backed up to iCloud.
In that case get a computer get on any internet provider and go to www.icloud.com sign in and go to Find My iPhone. From there click on your devise and do a remote wipe. Personally I find this much easier than to have to mess with downloading software on your computer and all the other crap.
Hope this help! -
TS2446 Hi,My Apple ID has been disabled Please help Thank you
Hi,My Apple ID has been disabled Please help Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you
If changing your password does not solve then contact itunes support
-
My iPod does not update it self in iTunes. I click on the "update the latest version for your iPod" and it fails. Please help me.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My apple account is disabled, please help me deal with as soon as possible!
My apple account is disabled, please help me deal with as soon as possible!
Change the password, but did not receive the letter to change the password
-
I have a 4th generation iPod. My system is Windows 7, 64-bit. iPod not recognized in iTunes. It is in my computer. Also getting iTunes error message about cd/dvd drivers not properly installed. I've restalled 5 times and still not working. Finally got iPod software to properly install. Please help!
Did you try this:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7 -
HT1212 my grandson ipod is disabled please help
my grandson ipod is disabled please help
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
Hello, I have the brand new iPod Touch 5. And someone messed up the passcode and now it says "iPod is disabled connect to iTunes". After I connect it to iTunes, it says "Do you want to allow this computer to access information on "iPod"? When I click Continue it says "To allow access, please respond on your iPod touch." But nothing happens on the ipod it still says disabled. Also I never synced this iPod to any computer before. I have lots of pictures that I need. Is there any way I can recover those pictures? I've looked at other similar posts and none of the solutions work. Thanks!
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Forgot passcode or device disabled
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.
You may be able to get some info from the restored iPod by:
via How to perform iPad recovery for photos, videos
Wondershare Dr.Fone for iOS: iPhone Data Recovery - Wondershare Official
http://www.amacsoft.com/ipod-data-recovery.html
iPod recovery software to restore lost music files
http://www.pcrecoverytools.com/ipod-data-recovery.html -
Both my iPod touch and iPad have been syncing properly with iTunes, until todat that is. I downloaded iTunes 11.1.5 and now iTunes isn't showing up/reading/detecting any of my devices. I can no longer sync both my iPod touch and iPad. Please HELP
See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates -
hi please help how to open my daugthers ipod she forgot her password all day...she cant remmy can u help to fix my daugthers ipod passcode lock how to open her password she been tried still disabled very upset how to open her passcode lock thankyou
If you cannot remember the passcode, you will need to Restore your device...
Connect to iTunes on the computer you usually Sync with and Restore...
http://support.apple.com/kb/HT1414
If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/HT1808 -
My Latest iTunes on My PC wont Recognize My iPod Nano 6 Gen. Please Help!!
My Latest iTunes on My PC wont Recognize My iPod Nano 6 Gen and it wont even come out in the PC, there this sounds that it makes when i connect it but nothing pops up no where in my PC nor the iTunes i dont know why, cause my ipod is new. I try new cables i try unistall iTunes i try almost everything but nothing works.....
Please Help!
P.S My PC is a Windows 7 32bit, New iTunes, New IPod, New USB Port.I have the same problem, just with a 7th generation. There are no posts yet, but if someone posts, I hope it helps.
https://discussions.apple.com/message/21774547#21774547 -
Hi,
Due to my brother locking me out of my ipod touch I had to wait an hour to log in again. Unfortunately when I did this, I, again put in the wrong password twice more, each time locking me out for a further 60 minutes. On my 3rd attempt to log in the wrong password was entered again. This time though instead of logging me out for another 60mins it now tells me to "connect to itunes" but I have no idea how to do this and I am now unable to use my ipod. Please help.See Here > http://support.apple.com/kb/HT1212
-
On my THIRD iPod Touch aka " Mr. Freeze" Please Help!!!
I got my first 16GB iPod touch back in November and it was GREAT! I never had any function problems at all. It always tuned on , turned off , charged , synced , slept , and played just as it was supposed to. Then after about 2 months the left channel audio started cutting out . So I made a service request and sent it off to AppleCare where they quickly identified the problem and replaced my iPod with a different one.
Now the first night I had this replacement iPod it froze up on me and would not do anything until I held the home and Power button for 5 seconds until it restarts. This became a daily ritual. EVERYDAY I would go to use this iPod and it would be frozen , you could look at the screen under direct light and see that the screen was not completely off , you could not see pictures or backgrounds just different shades of black blocks and bars accross the screen vertically. And while it is in the frozen state is drains the battery VERY quickly. I can finish using the iPod at the end the end of the day with at least 75% battery left , turn it off and go home and check it 2 hours later and it will be frozen and when I get it to restart the battery is in the RED. When it is in this frozen state connecting it to the computer does nothing , the computer will not see it at all as long as it is frozen. It tried the 5 R's to every extent with no positive results.
So I got frusterated and made another service request and sent it off to AppleCare to be "Serviced". They said their technicians could find nothing wrong with it , that it met all of Apples quality control guidelines and function as expected by Apple , so they sent is back to me. It arrived to me FROZEN again!
So I tried to use it as was for about another month and decided you know what my first touch NEVER did anything like this in the 2 months I had it so I know it doesn't have to be this way. So I made another service request for this same (my 2nd) touch. Only this time I sent copies of a letter explaining every detail of the problems , and insisting that they either repair/replace or refund my money. Funny enough this time they iddentified and issue with it and replaced it with what is now my 3rd iPod touch.
Now this 3rd Touch does not do what the second one does. I does something NEW. it keeps going into RECOVERY mode , whatever the **** that is , so I will go to use it and it will not function nor turn on and when I connect it to my computer it says iTunes has detected an iPod in recovery mode and it must be restored before it can be used! So this morning I got up for work ejected the touch from my PC , it had been charging , slid the slider to unlock it and verified it was charged and ready to go abnd then turned the screen off and drove to work. Fifteen minutes later I go to turn the music on and it is stuck in recovery mode.Now I have really had it!!! If it's not annoying enough that this has to keep happening all my music is on my PC at home. So I plug it in to my PC at work and its says it has detected an iPod in recovery mode and must be restored, so I can restore it but then there is no Music on it until I can get back home to resync it with my home PC. So for the entire rest of the day I have and iPod that is no longer frozen , but also has NO content on it!This happens once maybe twice a week , not near as frequent as the last replacement Touch they sent me and it seems to be a different issue also , but still a problem just the same.
I don't understand why this keeps happening?!?! All the content is the same accross all 3 Touch's I have had. My usage remains the same for all 3. Nothing has changed accept the Firmware version between the three. The first touch was 1.1.2 the second was 1.1.3 and the third is 1.1.4.
And of course I never had any problems until I purchased the January Software Upgrade POS. Is it possible that the JSU is causing all of this? Is there a way to remove the JSU off of this Touch or would I have to revert back to 1.1.2 Firmare? And if so can it be done? If I have to do that and it is indeed the problem can I obtain a refund for the JSU because it CRIPPLES the iPod??
PLEASE help , any advice is greatly appeciated! Thanks
-CodyWell, I am VERY particular about keeping my electronics MINT. I have never not used a protective case and I have to say it is almost heart breaking to imagine the scratchs my Touch will have on that shiny back after just one day without a case...........but I am desperate. I must say I really do love my Touch. It is my 15th Media player and beyond all comparison the best Media Player I have ever owned and I am willing to do whatever is necessary to remedy this situation and be able to use my Touch as intended once again.
What gripes me the most is that I paid premium price for this iPod Touch and it has virtually no Tech support. It baffles me. I had ONE tech support phone call available within 90 days and I used it on the first Touch so now I can't phone tech support , you cannot e-mail tech support , my only option is to place a service request and send it to AppleCare and you can't give a decent description of the problem even then because you are limited to 200 characters and I am damned tired of sending it back and forth. Is it really so hard to offer decent Tech support for these $400 and $500 Media Players? Dozens of other manufactures manage to do it so why can't Apple? They've got an AMAZING product , why not give it AMAZING support? Thats all I'm saying.
Message was edited by: GrandMasterB -
Brand new ipod touch suddenly stopped working. please help!
I was messing around on my brand new ipod touch and it suddenly crashed. it flashed a static-y black and now the screen is bluish white and won't change. I tried holding both the home button and the black button on top of the ipod and neither helped. I even connected it back to my mac book but nothing happened. please help! i've only had it for two days!
That sounds like a mechanical problem. You might want to insert and remove the headphone plug several times and see if it fixed the issue. If it does not, call Apple. 800-275-2273 in the U.S.A. and I think Canada.
-
My PC Freezes when I plug in my IPod Nano!!! Please HELP!!!!
Hello, I just bought a refurbished ipod nano and everything works fine until I plug it into my computer I do not know what to do please help me.
P.S. If this has been brought up already I am sorry I didn't have time to search for it.
ThanxSame problem. Im running on a sony vaio and everything just stops working until i unplug my ipod. I'm really getting annoyed with this. I even tried running it through winamp, and that froze even worse. Im able to close all the windows and whatnot, but when i try to terminate an application through task manager, it doesnt go away until i unplug my ipod, meaning i cant restart itunes without unplugging my ipod. then i unplug and it works fine. then i plug back in and it freezes up again!
Maybe you are looking for
-
In the example attached to this question is a simple VI application that cast, using type cast of LabVIEW, one value to different other type. My understanding of type cast, in C, C++ and to my best knowledge, was an implicit adaptation of a numerical
-
What would you use , golobal or local variabel ???
hello I must use an object that is going to use a sql connection to perform insert to database . this object is going to be used 4 times in my class is it better to use it a global variable ,or to create 4 times this object here is an example of the
-
when trying to reset my partners iphone, I accidently forgot the .au at the end of his email and now I cannot log in as the password had been reset but I cannot find how to change his email address
-
Receiving another customer's emails
I have not been a Verizon customer for over a year and yet I receive data usage alert emails for a DIFFERENT customer. This customer is not related to me at all and is a complete stranger. I have received these alert emails for this customer for abou
-
Product - to archive: where to find?
Hi there, In which table or via which function module/bapi can I check if a particular product is set 'to archive'? (As seen via transaction commpr01) Thanks in advance! KR Allan