HT1386 My phone is disabled. How can I rest it with out using a computer?

My phone is disable. How can I rest it without using a computer?

Sell it to someone that has a computer & use the money to purchase a new phone. Either that or find a computer.

Similar Messages

How can i get apps with out using credit card info because i do not have a card ?

how can i get apps with out using credit card info because i do not have a card ?

Yo Chris. I've been following your answers to different threads and quite frankly, you're very keen in answering everybody regarding this stupidity that Apple has brought upon its customers. Kudos to you. But the problem is, most of the time, in some devices, your solution doesn't work because the NONE option is not there. The same goes for me.
Meanwhile, I found a temporary workaround for the iPhone 4s, iPad 2 and iPod Touch 4th Gen.
Register a free Apple ID from the iCloud Settings.
Go to Settings>iCloud>Account>Tap Payment Information on the Storage Plan Category.
Fill in the other boxes and choose "None" on Credit Card Information.
That's it! Hope I helped those who still couldn't find the "None" Option.
Must be running IOS 5.0.1 though, else there would be no iCloud.

My iPhone 4 has no storage left. I have deleted everything. But when I go to my storage on my camara roll it has 40.1 MB SAVED! How can I delete that with out having a computer

I don't understand why I don't have any memory but my girlfriend had a hole lote more memory. And we have the same I phones.

Songs, videos, pics take a lot of room. In addition, a thumbnail is created for each pic and an index so the total space used is a great deal greater than just the size of the pic...400 pics will use a lot of storage space. In addition to Usage, you can get info from Settings > General > About.

HT4946 if my phone is disabled, how can I restore to get rid of a passcode

If my phone is disabled, how can I restore to get rid of a passcode that was entered by mistake.

Options for when an iOS device gets locked because of forgotten password:
Restore (and reset password) on your device by connecting it to the last computer to which it was connected:
iTunes: Backing up, updating, and restoring iOS software - http://support.apple.com/kb/HT1414
If you cannot connect it to the computer to which the device was last connected you will have to use recovery mode to completely reset the device, losing all data:
iOS: Unable to update or restore - http://support.apple.com/kb/HT1808 - recovery mode (e.g., cannot connect to computer last used to sync device, iTunes still asks for a password)

My iPad Air is disabled after wrongpassword attempts.I didn't sync it with my laptop also. How can I restore it with out losing the data.

My iPad Air is disabled after wrongpassword attempts.I didn't sync it with my laptop also. How can I restore it with out losing the data.

You can't unlock it without losing data. It's too late for that now. You totally erase the iPad when you unlock it and you will have to start all over again. Most of your purchased content can be downloaded again.
Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support
Download past purchases - Apple Support

I cant remember my password to logon to my mac, how can i change it with out needing the old one?

i cant remember my password to logon to my mac, how can i change it with out needing the old one?

http://support.apple.com/kb/HT1274

How can I find if someone is using my computer remote

how can I find if someone is using my computer remote

Do you mean "using your computer remotely," as in accessing it from another location? That's extremely unlikely, as it's no trivial task to set up sharing over the internet, and would require physical access to your computer to get that done. What symptoms are you seeing that lead you to believe this is happening?
Alternately, if you mean literally "using your computer remote," if someone is fiddling with an Apple Remote in the same room, you would probably see iTunes opening, music starting to play, volume changing, etc. My 2-year-old got hold of my remote once and caused me no end of frustration trying to figure out what the *%&*#(& was going on!

Trying to install Abode CS4 design standard Upgrade version. How can I install this with out having to install all my previous versions? Thanks Mario

Trying to install Abode CS4 design standard Upgrade version.
How can I install this with out having to install all my previous versions?
Thanks
Mario

You simply install it and input the required serials, including one of a previous product when asked for it.
Download CS4 products
Mylenium

How can I run MP350 with Windows 8.1 computer? Works OK with Windows 7 machine. Need drivers.

How can I run MP350 with Windows 8.1 computer?
It works OK with Windows 7 machine, using drivers from original CD.
Windows 8,1 machine doesn't find those drivers (which I copied to its C drive).
It doesn't find needed drivers on the internet.

Hi Larry-R,
I see that you made a later post regarding this. Please refer to the answer on that post regarding your inquiry.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

HT4623 I have tried resetting an iPhone 3 and I am unable to activate and sync it. How can I reset the device without using a computer?

I have tried resetting an iPhone 3 and I am unable to activate and sync it. How can I reset the device without using a computer?

Hello anacc,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Connect your USB cable to your computer but not to the iPhone, iPad, or iPod touch until step 3.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button down, connect the USB cable to the iPhone, iPad, or iPod touch. The device should turn on.
Continue holding the Home button until you see the Connect to iTunes screen. When this screen appears, you can release the Home button:
Note: If the image of a battery appears, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again. If you don't see the Connect to iTunes screen, try these steps 1 through 4 again.
iTunes should automatically open and display the following message:
"iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes."Note: If iTunes not open after two minutes, please open iTunes yourself.
Use iTunes to restore the device.
Best of luck,
Mario

How can uesd app store with out visa to dawnload free app only

Hello
How can uesd app store with out visa to dawnload free app only

There are instructions on this page for how to create a new account (the instructions won't work with existing accounts) without giving credit card details : http://support.apple.com/kb/HT2534

I bought a Mac Mini w/ Iworks.. Pages has disappeared completely.. how can I re-download with out paying for it again

I bought a Mac Mini w/ Iworks.. Pages has disappeared completely.. how can I re-download with out paying for it again

The iWorks prebundled with Mac Minis is a demo release, and not fully featured. Unless you mean you downloaded iWorks from the Mac App Store at a later time, it really can't be freely re-downloaded as fully featured.
Use this link if you got it from the Mac App Store and can't find get it to redownload normally: http://www.apple.com/support/mac/app-store/
Look at* http://www.macmaps.com/crossplatform.html for alternatives.

How to print a string with out using main method??

how to print a string with out using main method??
if we can tell me with example?
thanks in adavance
raja

Hi,
actually there's none. The UITableView class needs to "know" the tableView's height so either it can calc <number of rows> times <row height> or it has to sum the height of each single row.
If the row which needs to be of different size always is the first or the last row you can user a tableHeader or tableFoot view.
Regards
Dirk

Iphone disabled, how can I reset it with serial number

My Iphone is disabled. Can I reset it with the serial number? I do not have ITunes

No, if your device is disabled, you need to use iTunes to fix this issue.
iOS: Forgotten passcode or device disabled after entering wrong ...

How to queue custom events with out using af:calientListener.- onKeyUp.

Hi,
I have a custom component ( extending richinput text).
defined a new attribute called "onkeyup" and added necessary logic in Renderer. Some thing like
write.writeAttribute("onkeyup" , "handleEvent()");
I rendered the java script code too ..... in my custom renderer. ( I neigther want to write java script in metaContainer of document tag nor wants to use resource tag..)
and the handleEvent code is something like this.
function handleEvent()
In this method i want to write the code which pushes my custom event to the queue.
some thing like this..
component = event.getSource();
AdfCustomEvent.queue(component, "customEvent",{payload:component.getSubmittedValue()}, true);
event.cancel();
Usually if use a clientListener then it will call the method { handleEvent(event) } passing event parameter so that we can get the source of that event.
But as i dont want to use the clientEventListener.... as of now... i can't get the component because i don have the event object with my method.
So could any one please letme know , how can i queue my custom event in to my customcomponent... with out using ClientListeners.
Edited by: mchepuri on Nov 9, 2009 10:04 AM

Hi,
AFAIK, you cannot queue an event to the serverListener without a clientListener.
-Arun

HT1386 My phone is disabled. How can I rest it with out using a computer?

Similar Messages

Maybe you are looking for