HT1386 syncing i4phone 4s so that it deletes email on computer and phone at the same time
syncing i4phone 4s so that it deletes email on computer and phone at the same time
Has nothing to do with syncing your phone. Determined by what type of email account you have. To keep mail in sync requires an IMAP or Exchange account, not possible with a POP account.
Similar Messages
-
How can I delete email from iPhone and ipad at the same time
How can I delete emails on my iPhone and ipad at the same time
Use IMAP Mail e.g. Gmail
-
How do i delete sections of video and audio at the same time
hello, i made a video with sound and overlapping voiceover i want to know how do i delete a section of the video and the voice over without having to resynch everything again?
In Final Cut Pro X, this is easy. You drag to select all these clips. Then use the Blade Tool.
However, in iMovie, it is not as straightforward. You can edit the camcorder clip and its audio, but any music tracks, voiceover tracks, etc. will not be edited with it.
A workaround is to use the SHARE menu to SHARE/EXPORT TO QUICKTIME using Apple Intermediate Codec to retain as much quality as possible. Then import this new movie into an Event. New all the audio is married to the video and you can edit everything together. -
How can I delete photos from my iPad, iPhone, and laptop at the same time?
How can I delete photos from my iPad, iPhone, and laptop at the same time so I don't have to do it separately on each device?
Photos that were synced from your computer using iTunes can only be deleted by de-selecting them from the folder from where they were synced - and then re-syncing.
Connect the iPad to the PC and launch iTunes.
Click on the iPad name on the left side under devices.
Click on the Photos Tab on the right.
If you want to remove all of the Photos - uncheck the Sync Photos from Heading
Click on Apply in the lower right corner of iTunes
If you are using iTunes 11 - this will be helpful, Setting up syncing in Windows.
http://support.apple.com/kb/PH12313 -
Im too worried about the battery percentage while playing a game on my iphone 4s.so that,i decided to play a games and charging at the same time.im too worried for my battery problem on the future.please give a conclusion.
It is perfectly fine to use the phone while charging it.
-
how do i go about deleting a large number of files at the same time? where's the easiest place to do it?
A bit vague as to what you intend, but the simple answer is to select all the files you want to delete then either drag to the Trash or CTRL- or RIGHT-click on the selection and choose Move to Trash from the contextual menu.
-
How can i delete all songs on my ipad at the same time?
How can I delete all songs on my ipad at the same time without affecting my library on itunes?
Use IMAP Mail e.g. Gmail
-
i recently buy an apple iphone 4s.the problem is that when i started music player on my iphone the speaker is not outputting the sound.and when i lock the phone at the same time the sound starts.thos problem is from last 3 days.and i am really confused???
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
If the issue continues, take the device to Apple for evaluation and possible replacement. -
How is it possible that the black ipad 2 64 gb is sold out in hole Sweden, Hong Kong, Shanghai, Boston and Memphis at the same time!?
Because Apple can't get enought of them made to cover the demand, obviously. The iPad has been extremely popular and would probably be in short supply in any case, but the various disasters that have struck portions of the supply chain can't have made things any easier.
Regards. -
IPhone - how to sync with iPhoto and Aperture at the same time ???
I'm having a really hard time with syncing my photos - I'm using iPhoto and Aperture on my Mac. When I launch iTunes and start managing my iPhone, it seems like I should be able to sync photos from a variety of sources all at once (iPhoto, Aperture, other folders).
However, whichever option I select in the photos drop-down becomes the only libraries that are available to sync. What I mean is that if I select some of the Albums in my iPhoto list and sync those, when I later drill down to Aperture and select albums from there and perform a sync - then the previously synced/loaded albums and photos from iPhoto are automatically removed from the iPhone.
Why can't I sync between multiple photo albums / sources at the same time? This is incredibly annoying.Here's how I solved this problem:
In Aperture, select File -> Import -> iPhoto Library
Then under the "Store Files" dropdown, be sure "In their Original Location" is select. This will allow Aperture to see your iPhoto library, but it will be managed by reference rather than phyisically imported.
Now, in iTunes, select Aperture as the application from which you want to synch photos, and select the option to synch specific albums.
You should be able to see the names of albums in iPhoto as well as those created in Aperture. -
My iPod is corrupt according to iTunes, however it won't restore through iTunes either. I've tried to reformat the drive. Makes no difference. I've tried to reformat after choosing disk manager, and again the same result. The iPod takes forever to work through the reformatting process and I get the same message "Itunes has detected an iPod that appears to be corrupted. You may need to restore this iPod before it can be used with iTunes. You may also try disconnecting and reconnecting the iPod" and then my pc tells me to format the disk.
It's so frustrating, is there a fix to this? It seems like the iPod could still function, but I'm missing the way to get out of this loop, please help me!Likely a hard drive fault, see the note that i wrote few years ago, hopefully it helps
If a sad iPod icon or an exclamation point and folder icon appears on your iPod’s screen, or with sounds of clicking or HD whirring, it is usually the sign of a hard drive problem and you have the power to do something about it now. Your silver bullet of resolving your iPod issue – is to restore your iPod to factory settings.
http://docs.info.apple.com/article.html?artnum=60983
If you're having trouble, try these steps at different levels one at a time until the issue is resolved. These steps will often whip your iPod back into shape.
Make sure you do all the following “TRYs”
A. Try to wait 30 minutes while iPod is charging.
B. Try another FireWire or USB through Dock Connector cable.
C. Try another FireWire or USB port on your computer .
D. Try to disconnect all devices from your computer's FireWire and USB ports.
E. Try to download and install the latest version of iPod software and iTunes
http://www.apple.com/itunes/download/
For old and other versions of iPod updater for window you can get here
http://www.ipodwizard.net/showthread.php?t=7369
F. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
http://www.apple.com/support/ipod/five_rs/
G. Try to put the iPod into Disk Mode if it fails to appear on the desktop
http://docs.info.apple.com/article.html?artnum=93651
If none of these steps address the issue, you may need to go to Intermediate level listed below in logical order. Check from the top of the lists to see if that is what keeping iPod from appearing on your computer in order for doing the Restore.
Intermediate Level
A. Try to connect your iPod with another computer with the iPod updater pre-installed.
B. Still can’t see your iPod, put it in Disk Mode and connect with a computer, instead of doing a Restore on iPod Updater. Go and format the iPod instead.
For Mac computer
1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
5. Eject your iPod and do a Reset
6. Open the iTunes 7 and click “Restore”
For Window computer
Go to folder “My Computer”
Hope you can see your iPod there and right click on the iPod
Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
Now select “Format”
Eject your iPod and do a Reset
Open the iTunes 7 and click “Restore”
In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“HP USB Disk Storage Format Tool”.
http://discussions.apple.com/thread.jspa?threadID=501330&tstart=0
C. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
Tips
a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iTunes 7.
b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
http://discussions.apple.com/thread.jspa?messageID=2364921�
Advance Level
A. Diagnostic mode solution
If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
iPod 1G to 3G: "Menu" and "Play/Pause"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
iPod 1G to 3G: "REW", "FFW" and "Select"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service.
B. Format your iPod with a start disk
I have not tried this solution myself, I heard that there were few successful cases that the users managed to get their iPod (you must put your iPod in disk mode before connecting with a computer) mounted by the computer, which was booted by a system startup disk. For Mac, you can use the Disk Utility (on the Tiger OS system disk), for PC user, you can use the window OS system disk. Try to find a way to reformat your iPod, again it does not matter which format (FAT32, NTFS or HFS+) you choose, the key is to erase the corrupted system files on the iPod. Then eject your iPod and do a Reset to switch out from Disk Mode. Reboot your computer at the normal way, connect your iPod back with it, open the iPod updater, and hopefully your iPod will appear there for the Restore.
If none of these steps address the issue, your iPod may need to be repaired.
Consider setting up a mail-in repair for your iPod http://depot.info.apple.com/ipod/
Or visit your local Apple Retail Store http://www.apple.com/retail/
In case your iPod is no longer covered by the warranty and you want to find a second repairing company, you can try iPodResQ or ifixit at your own risk
http://www.ipodresq.com/index.php
http://www.ifixit.com/
Just in case that you are at the following situation
Your iPod warranty is expired
You don’t want to pay any service charges
You are prepared to buy a new one
You can’t accept the re-sell value of your broken iPod
Rather than leave your iPod as paper-weight or throw it away.
You can try the following, but again, only do it as your last resort and at your own risk.
Warning !!!! – It may or may not manage to solve your problem, and with a risk that you may further damage your iPod, which end up as an expensive paper weight or you need to pay more higher repairing cost. Therefore, please re-consider again whether you want to try the next level
Last Resort Level
1. . Disconnecting the Hard Drive and battery inside the iPod – Warning !! Your iPod warranty will be waived once you open the iPod.
In Hong Kong there are some electronic shops offering an iPod service for Sad iPod, the first thing they do is to open up the iPod’s case and disconnecting the battery and the Hard Drive from the main board of the iPod. Wait for 5-10 minutes and reconnecting them back. The reason behind which I can think of is to do a fully reset of a processor of the iPod. In case you want do it itself and you believe that you are good on fixing the electronics devices and have experience to deal with small bits of electronic parts, then you can read the following of how to open the iPod case for battery and HDD replacement (with Quicktimes)
http://eshop.macsales.com/tech_center/index.cfm?page=Video/directory.html
2.Press the reset button on the Hard Drive inside the iPod – Suggestion from Kill8joy
http://discussions.apple.com/thread.jspa?messageID=2438774#2438774
Have I tried these myself? No, I am afraid to do it myself as I am squeamish about tinkering inside electronic devices, I have few experiences that either I broke the parts (which are normally tiny or fragile) or failed to put the parts back to the main case. Therefore, I agree with suggestion to have it fixed by a Pro.
2. Do a search on Google and some topics on this discussion forum about “Sad iPod”
Exclamation point and folder and nothing else
Spank your iPod
http://www.youtube.com/watch?v=3ljPhrFUaOY
http://discussions.apple.com/thread.jspa?messageID=3597173#3597173
Exclamation point and folder and nothing else
http://discussions.apple.com/thread.jspa?messageID=2831962#2831962
What should I do with my iPod? Send it or keep it?
http://discussions.apple.com/thread.jspa?threadID=469080&tstart=0
Strange error on iPod (probably death)
http://discussions.apple.com/thread.jspa?threadID=435160&start=0&tstart=0
Sad Face on iPod for no apparent reason
http://discussions.apple.com/thread.jspa?threadID=336342&start=0&tstart=0
Meeting the Sad iPod icon
http://askpang.typepad.com/relevant_history/2004/11/meeting_the_sad.html#comment -10519524
Sad faced iPod, but my computer won’t recognize it?
http://discussions.apple.com/thread.jspa?messageID=2236095#2236095
iPod Photo: unhappy icon + warranty question
http://discussions.apple.com/thread.jspa?messageID=2233746#2233746
4th Gen iPod Users - are we all having the same problem?
http://discussions.apple.com/message.jspa?messageID=2235623#2235623
Low Battery, and clicking sounds
http://discussions.apple.com/thread.jspa?messageID=2237714#2237714
Sad faced iPod, but my computer won’t recognize it
http://discussions.apple.com/thread.jspa?messageID=2242018#2242018
Sad iPod solution
http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
Re: try to restore ipod and it says "can't mount ipod"
http://discussions.apple.com/thread.jspa?threadID=443659&tstart=30
iPod making clicking noise and is frozen
http://discussions.apple.com/thread.jspa?messageID=2420150#2420150
Cant put it into disk mode
http://discussions.apple.com/thread.jspa?messageID=3786084#3786084
I think my iPod just died its final death
http://discussions.apple.com/thread.jspa?messageID=3813051
Apple logo & monochrome battery stay
http://discussions.apple.com/thread.jspa?messageID=3827167#3827167
My iPod ism’t resetting and isn’t being read by my computer
http://discussions.apple.com/thread.jspa?messageID=4489387#4489387
I am not suggesting that you should follow as well, but just read them as your reference. You are the person to make the call.
Finally, I read a fair comments from dwb, regarding of slapping the back of the iPod multiple times
Quote “This has been discussed numerous times as a 'fix'. It does work, at least for a while. In fact I remember using the same basic trick to revive Seagate and Quantam drives back in the mid to late 1980's. Why these tiny hard drives go bad I don't know - could be the actuator gets stuck in place or misaligned. Could be the platter gets stuck or the motor gets stuck. 'Stiction' was a problem for drives back in the 80's. Unfortunately the fix can cause damage to the platter so we temporarily fix one problem by creating another. But I know of two instances where a little slap onto the table revived the iPods and they are still worked a year or more later.”UnQuote -
Delete photos in both iPhoto and Finder at the same time??
Is there any way I can delete photos in iPhoto AND at the same time delete them permanently in the finder?
We all take too many pictures with out digital cameras and we can't say for sure which once are good with just looking at the camera... so we have to import ALL of them to iPhoto. When we do that, they also get saved in the Finder. When you delete the bad photos in iPhoto you still sit on the bad photos in Finder...
Does anyone know an easy way to delete BOTH at the same time?
Thank youI'm not sure I understand your set up:
And I wanted to let you know that under Preferences the box "copy items to the iPhoto Library" is checked.
So, all your pics are copied into the iPhoto Library. BUT you also have copies in the Pictures Folder. Why do you have two copies? They don't count as a back up because they aren't on a different volume, all they are doing is wasting disk space.
If you let iPhoto manage the files then you have no need to access them in the Finder. With iPhoto 7 (iLife 08) the old iPhoto Library Folder is now a Unix Style Package File. The change was made to the format of the iPhoto library because many users were inadvertently corrupting their library by browsing through it with other software or making changes in it themselves.
There are many, many ways to access your files in iPhoto:
For 10.5 users: You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Apple-Click for selecting multiple pics.
To upload to a site that does not have an iPhoto Export Plug-in the recommended way is to Select the Pic in the iPhoto Window and go File -> Export and export the pic to the desktop, then upload from there. After the upload you can trash the pic on the desktop. It's only a copy and your original is safe in iPhoto.
This is also true for emailing with Web-based services. If you're using Gmail you can use THIS
If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
Or, if you want to access the files with iPhoto not running, then create a Media Browser using Automator (takes about 10 seconds) or use THIS
Other options include:
1. *Drag and Drop*: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
2. *File -> Export*: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
3. *Show File*: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
You can set Photoshop (or any image editor) as an external editor in iPhoto. (Preferences -> General -> Edit Photo: Choose from the Drop Down Menu.) This way, when you double click a pic to edit in iPhoto it will open automatically in Photoshop or your Image Editor, and when you save it it's sent back to iPhoto automatically. This is the only way that edits made in another application will be displayed in iPhoto.
I'm not sure I understand your problem.
Regards
TD -
Hello i opened logic 9 and logic x at the same time after that i lost audio in both programs i can only hear audio in the main output of my interface motu 828MKII
can somebody help me please? am in the middle of o project thank'sDid you reset Logic's audio preferences?
Did you do a hardware reset of the MOTU unit?
Try deleting preferences in Logic X
See my post in this message.
https://discussions.apple.com/message/24614057#24614057 -
I am unable to print to a Canon iR-Adv C5045 from a MacBook Pro (OS X 10.9.4) that is connected to Windows NT computer and shared on the company network. I am connected to the network by ethernet.
I was able to add the printer manually by going to Advanced, Windows printer via spoolss, smb://computer name/printer name and used the Canon iR-ADV C5045/5051 driver.
When I print it appears to be printing but nothing comes out. I checked the completed jobs from the Print Queue and the job is listed. Checked the print log on the printer and it isn't listed. Is there a different driver I should be using for this configuration?You may not have a choice as to what driver you can use. If the ADV C5045 only has the default UFR2 printer kit, then you will have to use the UFR2 driver - which is what you are using now. If you can access the copier, press the Counter Check button on the control panel. Then on the display you will see an entry labelled Check Device Configuration. Select this and scroll down through the pages. You are looking for an entry called PS. If you see it then the Canon does have the optional Postscript printer kit enabled and this will let you use an alternate driver. One suggestion would be to create the printer again using the same setting that you have done already but this time select the Generic Postscript driver included with the OS rather than use the Canon driver. This will help to determine if the driver is the cause.
If there is no PS option you will have to use the UFR2 driver and this could be the problem, as the Canon drivers don't always work well on a Mac via a Windows share. As a test, are you able to create a print queue directly to the Canon rather than via the Windows share? If you can, then this will let you check if the driver currently installed will work, as there can be settings on the copier that can block/stop you from printing. Assuming that you can print to the Canon with a direct connection from the Mac, then we can work on getting the printing via the shared queue. But if it doesn't print directly from the Mac, then it confirms that it may not be the server and more to do with the copier. -
It is Posible that I run 2 or more user account at the same time from one PC???
I have core i7 2600 8GB ram based PC, and I want to add another display, keyboard & mouse to run another account on my same pc any way to run both account at same time??? or any other way???
I don't thin you can unless you are running multiport server and even then you would need a special box to split out the KVM's of the extra machines. If you try to use a VM the only way that would work is if you rdp into the VM which I'm assuming
you don't want to do. If you hook two keyboard and mice to the same computer you will be fighting for control with the other keyboard and mouse. If this is a bigger project really the only solution without having two pc's to begin with is multiport server,
or a RDS server with thin clients.
Maybe you are looking for
-
I reset and erased my iphone 4 and now I can`t reinstall it! After I choose a language, region. and wifi, it says Please, try again later or contact customer care. I tried to do with iTunes, and iTunes even sees this iphone, but it`s like blank, ther
-
I have found that since I "upgraded" to Mavericks, many pieces of audio hardware that was compatable with snow leopard is not compatable with mavericks. these machines are supposed to be the best for multi-media, now, without any warning, Mac has rea
-
Functional Areas (FA) in Profit Center Accounting (PCA)
Dear all, We use Functional Areas (FA) to separate fixed costs in Profit Center Accounting (PCA). Originally, in FI, fixed costs are posted with Cost Center which is linked to FA. Now we find out that some cost centers missed their link to FA and hen
-
No Episodes in podcast subscription
I am trying to subscribe to 2 podcast, that's what people play and get physical radio, and although in the itunes store there plenty of episodes to when I subscribe no episodes are showing up in my itunes podcast section. Is there a problem with the
-
Why Firefox automatically clearing cookies/cache?
Recently Firefox has been automatically clearing all log-ins and passwords on a seemingly random basis. After closing a browser window, I launched Firefox, and all of my standard logins (emails, homepage, etc.) have been cleared. This has happened 3