HT1386 what do i do if the device button isn't on my iTunes?
I am trying to sync my phone to Itunes, becuase my screen is messing up. But the device button isn't showing up on iTunes. What should I do?
Restart your iPhone by holding down the Power button and the Home button at the same time for 10 secounds.
Similar Messages
-
I did the latest iTunes update...I have 2 iPhones--each thru a different provider. Now, I can't sync to download any music from iTunes. iTunes doesn't recognize either device now. I went thru diagnostics, didn't work. I tried the suggestions from Apple...it says to click the device button in upper right corner....there isn't one. When I connected each for the first time after update, it "installed device drivers". I have checked for further updates on iTunes--nothing. I made sure there were no updates listed for iPhones...all up to date. I get an error code and from what I have looked through in forums etc, it seems like a lot of people are getting it...0ex000084 I believe it was. Windows opens to download photos but that's it. Devices are not listed at all. I have tried all 3 USB ports in computer too. I have never had any problems before this update!! HELP! I just bought $15 worth of music I can't download to phones now!
On the left hand side of iTunes do you have the sidebar up left hand side?
If this is not up then try this, with iTunes open press "Control" and "s" together and it should bring it up. From the sidebar it should show an option devices with the iPhones underneath it. -
Every time I plug in my iPhone to my computer it opens up to my PC instead of iTunes. When I try to connect my phone to iTunes the device button doesn't appear. What do I do?
It is opening up your computer generally because there are photos in the camera roll to prompt you to import them to the computer as you would a digital camera.
To correct the issue with the iPhone not being recognized in iTunes, see this support document. http://support.apple.com/kb/TS1538 -
When I first opened up "Find My iPhone" on my pc, it located my phone. Now the device button no longer appears on-screen, what do i do?
Welcome to the Apple community.
If you can't remember the password, reset it at...
iForgot.com -
as title
what shall I put in the "device reference in" in the Read.vi?? for my USB-8451, where I found the name to be USB0::0x3923::0x7166::01349C20::RAW??
i put the whole name in and it keep telling me
Error -301706 occurred at NI-845x I2C Read.vi
NI-845x: The device reference is invalid. Verify that the supplied device reference contains a valid device name.
Thanks!Chihway,
I apologize for misreading your post the first time around. Dennis is only half correct in this case. The USB-8451 is supposed to show up as a USB-RAW device in MAX, but you do not have to run the driver wizard to create an interface to it. In Measurement and Automation Explorer, select the USB-RAW device under USB Devices and create a VISA alias (I always use 8451) by typing it in the "VISA Alias on My System" box. You should then be able to use that alias for all communication. I hope this post helps a little more than the last one!
Sincerely,
Chris G in AE -
i can not open my i pad-1 and the device gave me message connect to iTunes and when connect the computer give me message type the password firstly i do not know what can i do ?
Is it disabled due to too many incorrect passcode attempts ? If it is then you may need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808 - you should then be able to reset the iPad and restore/resync your content to it.
-
I've just updated my iTunes on my laptop
And when i plug my iPhone in, nothing happens and the device does not show up in iTunes
I have tried numerous cables, uninstalling and re-installing iTunes and searching for devices on iTunes
And i still have no luck
help!Pick the appropriate one of these for advice:
Windows - http://support.apple.com/kb/ts1538
Mac - http://support.apple.com/kb/ts1591 -
I need help with a few things....
1.) My ipod touch (5th gen) was doing what i believe was an ios7 update when i stopped it becuz it was taking forever. After that the screen just said connect to itunes. I've looked up how to fix it and i know it would work but there is a few things...I dont ever use my ipod for music. Just for apps and stuff and I have never connected it to itunes or anything. I need help making it so when i connect my ipod to the computer it starts syncing. But when I follow the directions for that, it says go to the device button and I dont have that option...Help!!
2.) In all the help videos, it says to do the slide to turn off thing but my ipod never lets me!! It does turn off though.
Theres a few other things. I need to know if this problem can be fixed if I can't find a way to fix the things i just said. Or if there is somebody that I can have repair it for me. Also if I have a warranty with Best Buy, I need to know if this could be covered. This was a gift from my boyfriend for Christmas and I use it a lot. I don't wanna have to buy a new one especially if this isn't a problem that can't be fixed. Thank you guys so much!!Try to connect in recovery mode, explained in this article:
iOS: Unable to update or restore
Before that, back up your device, explained here:
iOS: Back up and restore your iOS device with iCloud or iTunes
How to back up your data and set up as a new device
You can check your warranty status here:
https://selfsolve.apple.com/agreementWarrantyDynamic.do -
Connect the device to your computer.
Open iTunes.
Select iPhone, iPad, or iPod in the Devices list.
Click the Summary tab and select "Manually manage music and videos".
Click Apply.
than it says it'ss erase my iphone and sync with itunes library.
what should i do?It wil only erase the music and videos. Nothing else.
-
What should I do if the home button won't work?
What should I do if the home button won't work?
You can try this.
Calibrate the home button
1. Open a stock iOS app, such as Contacts
2. Press & hold the sleep/wake button at the top of your device until the red slider control appears.
3. Immediately release the sleep/wake button and press & hold the home button. Hold until the red slider disappears.
As a a workaround, you can use Multitasking Gestures if you can't get the home button to work.
http://www.cultofmac.com/199875/switch-between-apps-directly-on-your-ipad-using- four-or-five-finger-gestures-ios-tips/
However, you might want to try restoring the iPad to see if that returns the functionality of the home button and/or take it to an Apple Store and let a Genius have a look at it. -
Itunes 10.6 and iOS 5.1 the devices were no more recognized by itunes
Since I updated to itunes 10.6 and iOS 5.1 the devices were no more recognized by itunes (only be Win7 64bit) and the itunes 10.6 diagnose crashes the the programme
Try the link below, it solved a similar problem for me. I think the problem is the iTunes 64-bit installer. Step 5 fixed my problem. Also running Windows 7 64-bit
http://randomwindowstips.wordpress.com/2009/12/08/windows-7-itunes-9-software-is -not-installed/
Good luck! -
If you bought the iPod touch from somebody and then you locked yourself out of it what should I do because the guy didn't give me his iTunes password?
Sounds like the Activation Lock (iOS 7) is working as designed. It determs theft since y have to know the APple ID's passward to use/restore the iPod foro use. Unless you can get the password you have a nice but thin brick. Likely the iPod was stolen
-
i just got an IMac, and when i plug my IPad in, the device is not showing up on itunes ? can anyone help me ?
i tried many times, and it still dosent workTake a look at this Apple article -> iOS: Device not recognized in iTunes for Windows
Is the Apple Mobile Device Service installed and running on your computer? -
Where is the "device" button in the new version of itunes? Whenever we connect our ipod touch(es) -- 4th generation....a device button NEVER appears. We can't "click and drag" new music purchases to our "device" b/c our "device" never comes up.
iTunes 11: Show Sidebar and Status Bar
-
what can we do if the home button of my ipod is working very slow and if my ipod is still in warranty and by the way i have an ipod touch 4
If it is still under warranty take it to an Apple Store, or in any case call AppleCare (see http://support.apple.com/kb/HE57 for list of international phone numbers) to see if they can help you. They may be able to help you with repairs if it is a physical problem with the home button.
Maybe you are looking for
-
Using US 110V AirPort Express in Europe with 220V?
Hello all, I want to use my 110 V Air Port Express (US Version) in Europe at 220V. I know, that the sticker on the Express module says "110V". I also found the tech specs, which state usage from 110V to 240V (http://www.apple.com/airportexpress/specs
-
Error:maximum investment amount exceeded in area 51
Hello, When I am reversing the retirement document in AB08 , I am getting the error as "maximum investment amount exceeded in area 51". I maintian the maximum amount for area 51 in customizing, but still there is error. Is there any other way to reve
-
ADF 11G - Printing on Client Side???
Hello, I'm trying to send to the client printer a file stored in my server. Is there any way to do that? More specifically, I want to see from the server the client side printers. I'm working on ADF 11G version 11.1.1.4. and Weblogic 10.3.2
-
I was searching on a Turkish web site and was hoping to translate some of the information (pages) to English. I have done this before and was thinking that it may have been with Internet Explorer. Is this function available in Firefox?
-
Please help with this pixel on my SECOND macbook!
so after forking out 1320euro on a new macbook i found when i opened it first that it had a dead pixel so i returned it (after ALOT of hassle) and now a week and a half on into my second macbook another appears but i dont know if its stuck or what, w