HT1386 Why wont itune acknowledge that my ipod is plugged in!?
I recently downloaded the latest update to itunes on my laptop and now it wont acknowledge that my ipod is plugged in and therefore it now wont sync. My laptop recognises it is plugged in as it comes up with an 'apple ipod' icon. Any one know how i can get it to work again? I uninstalled itunes and re-installed it and that didnt work so now im stuck!!
See TS1538: iOS: Device not recognized in iTunes for Windows, in particular section 5.
tt2
Similar Messages
-
HT201210 why wont itunes back up my ipod and let me update
when i try to back up my ipod rebel it goes thought cycle then tells me cant back up or update what gives
Try updating from the iPods settings and if that fails or is not available then try updating with iTunes on a computer.
Heres a guide: http://support.apple.com/kb/HT4623 -
Why wont itunes recognize my phone when i plug it in
when i plug my phone into the computer nothing happens and it is not recognized
Do one or more of the following:
> Restart your PC/Mac OS
> Uninstall and Reinstall iTunes
> Reset your iDevice
> Get Lastest iOS Update (depends on what generation)
If you haven't check.... go to where you can see your hard drives (the place where you can access any USB flash drives, disc drives, hard drives.....) and see if your iDevice will show..... If it does..... go to iTunes
If you have iTunes 10.7..... look at your left hand side (the side bar).....
If you have iTunes 11..... look at the top right hand corner.....
BTW..... im not a Mac user so I'm not sure if any of this helps.... I'm a Windows person.....
Message was edited by: michael08081 -
Why wont iTunes allow me to copy/sync a song from my iPod?
Why wont iTunes allow me to copy/sync a song from my iPod? I have a song on my iPod that i want on my laptop to add to my iPhone, but i can't sync it. I did not purchase it via iTunes.
The music sync is one way - computer to ipod. The ONLY exception is itunes purchases.
As the song came from your computer in the first place, it should still be there and be included in your regular backup of your computer.
The ipod is not a storage/backup device. -
I recently dug out my old 160gb iPod Classic. Every time I connect it to iTunes, the program freezes and/or crashes. My computer recognizes that the iPod is plugged in, (it's accesible under "My Computer") but iTunes doesn't acknowledge it, at all. I've tried every single solution I've seen, and none of them work. I know the Classic is outdated, but my other iPod doesn't have nearly as much room. Can anyone help with this?
See Corrupt iPod classic.
tt2 -
After updating my iTunes it no longer acknowledges that my iPod or iPhone is connected so I can't update my music.. I have followed all of these steps and everything is working fine but this new version of iTunes isn't recognizing my devices. Any advice?
I have the same problem. Running Win 8 64Bit, updated to latest ITunes and now will not recognize phone or pad. Followed all advice from Apple (uninstall/restart/re-install, all in exact order) ... nothing. Spoke with Apple tech and walked through the whole process, but no resolution. Tech was trying to be helpful but has no way of addressing issue.
-
When I put acd in the computer, itunes opens and I can transfer music to my ipod.
Why wont itunes open when I put a dvd in the computer? It opens in windows media player. I want to transfer a dvd to my ipod.Have you tried to click on "repair" and then try to uninstall the component?
-
HT1267 why wont itunes download it keeps saying that an error has happend
why wont itunes install on my laptop it keeps saying error has hapend
What does the error message say? (Precise text, please.)
-
Why wont i tunes recognise my ipod on win 8.1
why wont itunes recognise my ipo touch on win 8.1
Hi kidman bob,
If you are having issues with your iPod touch not being recognized by iTunes on your Windows machine, you may find the troubleshooting steps outlined in the following article helpful:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Regards,
- Brenden -
Why wont itunes download on my laptop running on windows vista, keep getting Windows error127, can anyone help please this is driving me insane, tried 9 times already without
success.Uninstall your existing copy of iTunes. Delete any copies of the iTunesSetup.exe (or iTunes64Setup.exe) installer files from your downloads areas for your web browsers and download a fresh copy of the iTunes installer from the Apple website:
http://www.apple.com/itunes/download/
(The current build of the 11.1.4.62 installer was changed a few days ago, which fixed the bulk of the reports of MSVCR80.dll/R6034/APSDaemon.exe/Error-7/AMDS-could-not-start trouble ... but the build number on the installer was not changed. So we're trying to make sure you do the reinstall using a "new good" 11.1.4.62 installer instead of an "old bad".)
Does the install with the new copy of the installer go through properly? If so, does that clear up the error message?
If you still have the same error messages cropping up, then try the procedures from the following user tip:
Troubleshooting issues with iTunes for Windows updates -
How to change the Itunes library that your Ipod syncs with?
I am absolutely lost trying to change the Itunes library that my Ipod syncs with. Had a hardware meltdown and have found abouut half my music files on system hard drives AND my Ipod if safe but cannot figure out two things. A. How to get the content of the Ipod transferred to my new Itunes library B. SInce I cannot find my correct Itunes library (i believe that it is lost for good)I started a new one but it will not sync with my Ipod as it says that it is supposed to sync witht he lost version. ** If anyone can help me would greatly be appreciated. I have approximately 3,900 tunes left to tranfer my the Ipod to the new library and it is kicking my butt to not be able to figure this out. Ya gotta love meltdowns. Scott
Here's a post by forum regular Zevoneer that will help you
http://discussions.apple.com/message.jspa?messageID=6850628#6850628 -
Itunes is not recognizing that my ipod is plugged in so I am unable to sync my device. What an I do to get itunes to notice my device is plugged in?
iOS: Device not recognized in iTunes for Mac OS X
Or
See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates
- Try on another computer to help determine if computer or iPod problem -
Why wont itunes open on my iphone 4S after updating to ios7. Anyone else got this problem. suggestions to fix would be appreciated
Now fixed by going to settings-Safari and unblocking cookies to never.
-
Hello, Im trying to update my ipod 3g 4.2.1 to ios 5.0.1.When I try to update,itunes says that 4.2.1is the lastest sofware for my ipod.I also tried to do it manually(shift+restor)itunes says that the"ipod could not be restore because the fimwire isnot compatible" I need some help on this.
The messages are saying you have a 2G iPOd. Those canonly go to 4.2.1. Apple only made 32 and 64 GB 3G iPOd. A 32 can be either. To further identify yours:
Identifying iPod models
Enter SN hee:
Apple - Support - Check Your Service and Support Coverage -
My itunes says that my ipod is synced with another library when it is not and cannot update or sync without wiping it and all its data
Can anyone help meSyncing to a new iTunes library or computer will erase your ipod. Only if you back up your iPod manually before syncing, you can restore your device from that backup again. A manual backup does not include the sync process.
Do this:
Disable autosync in iTunes, connect your iPod to your new computer and right click on it in the device list and choose backup. iTunes will backup your iPod without syncing.
Transfer your purchases the same way, choosing "transfer purchases" this time.
All media content will be erased during the first sync, but you can restore your settings and app data from your manual backup afterwards.
Don't forget to set up at least one contact and event on your new computer to be able to merge calendars and contacts when you sync the ipod for the first time.
Music is one way only, from the computer to your device, unless you bought the songs in itunes and transferred your purchases.
There is 3rd party software out there, but not supported by Apple, see this thread:http://discussions.apple.com/thread.jspa?threadID=2013615&tstart=0
Maybe you are looking for
-
RE : Creation of subcontrating PO - Components details
Hi Experts, I am doing a subcontracting purchase order using BAPI - (Bapi_po_create1). But iam not able to update for the sub components of the materials. So, I opted for the PO creation first using Bapi_po_create1 and then using the FM Bapi_po_chang
-
Freezinng with document info window
I have a problem with all of the programs in my Master Collection CS5. When I open the document info window it comes up blank and then freezes the program. Mouse clicks don't work and the blank window won't close. The only way to exit is to force qui
-
LOV selection fails when there are validation errors on the base page
Hi I have lovs and some other required fields on a page . If there are any validation error on one of those text fields and if I open the LOV (not related to the text fields) and tries to select an item from the LOV search results, it doesn't do it u
-
How do I reset my apple tv it is on a different language
I have just got a new apple tv and when I have plugged it in it is on a different language so I can't use please help
-
Facebook, G+ and twitter only work in muse, why not when html is exported?
Below are the three codes I placed in Object/Insert HTML on my Master page, plus partial screen shots of the two results. When I previes, preview in browser and publish from Muse to a BC platform, all looks as I planned and the button function. But,