HT1413 how to set the ringer to flash the camera flash for incoming calls

I have seen other iphone 4 have their riinger set up to flash the camera flash for incoming calls. I have not been successful to figure it out from the settings feature. does anyone know how to do this?

Hi jdflo50,
The feature you are talking about was introduced in iOS 5 Software Update v1.0:
http://support.apple.com/kb/DL1456
Accessibility improvements
Option to light LED flash on incoming calls and alerts for iPhone 4S and iPhone 4
Settings > General > Assessibility > LED Flash for Alerts
Hope this helps!
- Judy

Similar Messages

How to set it so voice recordings aren't interrupted by incoming calls

So, recently when I've been recording with the voice memos, and a text or an incoming call comes in, it INTERRUPTS THE VOICE RECORDING. Why would I possibly WANT this, Steve Jobs?
The other day, I was recording a performance I was doing on stage. I got a text from a friend saying "I'm not going to make it to your performance. Sorry." And my recording was interrupted. Of course, I didn't notice until I got down off the stage. Big dissapointment.
Is there a simple preference to be set for, like, "Don't let voice memos get interrupted"? Check!
Thanks for your help

Battletard wrote:
INTERRUPTS THE VOICE RECORDING. Why would I possibly WANT this, Steve Jobs?
Steve doesn't make the iPhone himself.
Nor is he in the user forum.... well he could be but I haven't seen him.
The reason it interrupts is because the iPhone is a phone.
And the main function is .... a phone.
Anything phone related pops in front of any other app.
So as gdgmacguy suggest, if you want to turn off phone features for a while the activate Airplane mode.
Which would probably be also the correct setting if your phone is where there is a performance.
Have some respect for the other performers; you would be unhappy if someone got a call during your performance right?

How do I set a ring enum to the first item, regardless of its value

Hi everyone,
I am trying to set a ring enum to the first value. During run-time, I dynamically update the entries in a ring so I don't know the strings or the values ahead of time. How do I force the ring to select the first element, which may have a value of '3', for example?
Thanks,
Jason

How surprizing ! Here is a LV 8.0 version. As you can see, the "Values" property exists !
Chilly Charly (aka CC)
E-List Master - Kudos glutton - Press the yellow button on the left...
Attachments:
Set Ring To First Item LV8.vi ‏7 KB

How to set a variable value on the BPC Data Manager

Hello BPC Experts,
I'm creating a BPC10 NW version demo environment for our prospect customer.
I made a data manager to import BW data into BPC model from BW cube.
I need to import just one month data into BPC from the BW cube that has more than one month data.
When I run the data package manually, I can select a member of the time dimension prompt and I can import specific month data I want.
But, in a case where the program (data manager) runs by JOB monthly,
I can't select a member of the time dimension prompt manually.
So I want to know how to set a variable value to the time dimension prompt from a system date etc. automatically.
Are there any way to set a variable value to the time dimension prompt on the data manager automatically from a system date?
Or, do you have any other solution to import just one month data into BPC from the BW cube that has more than one month data by the data manager running on JOB ?
(without selecting a member of the time dimension prompt of the data package manually)
Thanks in advance,
Keisuke

Hi Gersh
Sorry for my late reply and thanks for your helpful information.
I tried the second way of your information and I could configure it.
And I 'll try first way of your information.
Regards,
Keisuke

How to set Multi User Environment in the weblogic 5.1 and 6.1 server..(Urgently)

Hi all,
I need to know how to set Multi User Environment in the weblogic 5.1
properties file..
Here my question is..:)
1) I have a database with multiple users and having different privileges
for the users.. and i need to use all the privileges when user aceess
the database through weblogic server connectionPool.
2)According to the user privileges i need access the database tables
content and gives the frontEnd(jsp).
3)How to modify dynamically weblogic.properties file in the weblogic
5.1.
If anybody having idea reg. this issues pl...help me..
Thanks in advance
Chandu([email protected],[email protected])

Hi. A JDBC connection pool is a set of identical, interchangeable, pre-made
connections, and the controls to make sure only one user uses a particular
connection at any one time. If you want to have different DBMS users, you can
have a separate pool for each DBMS user, which may contain as many or few
connections as you want. Some applications has a pool for the accounting
applications, and another for the sales applications etc. Some do have a
separate pool for john, jane, joe etc, each with one connection. Pools
can be created and destroyed dynamically using the dynamic pool API.
Joe
softstar wrote:
>
Hi all,
I need to know how to set Multi User Environment in the weblogic 5.1
properties file..
Here my question is..:)
1) I have a database with multiple users and having different privileges
for the users.. and i need to use all the privileges when user aceess
the database through weblogic server connectionPool.
2)According to the user privileges i need access the database tables
content and gives the frontEnd(jsp).
3)How to modify dynamically weblogic.properties file in the weblogic
5.1.
If anybody having idea reg. this issues pl...help me..
Thanks in advance
Chandu([email protected],[email protected])

How does one add a personal recorded M4R file to the ring tones in the UK system for iPhone 3GS

How does one add a personal recorded M4R file to the ring tones in the UK system for iPhone 3GS.
I have tried all sorts of ways of adding my personal M4R file but can't find the place (within the UK versions of iTunes} to transfer this file so that I can select it as a ring tone.
I've tried also changing to the US version of iTunes and still can't find a way of doing it, although I have heard that it can be done.

You should be able to just drop it into the library within iTunes.
http://cnettv.cnet.com/create-free-iphone-ringtones-using-itunes-8-0/9742-1_53-5 0003920.html
Check out the video above for a lot good info. The ringtone must be less than 35 seconds.

I'm new to using iCloud and couldn't find the answer to: how to set my calendar to use the 24 hour clock. Thanks all.

?? I'm new to using iCloud and couldn't find the answer to: how to set my calendar to use the 24 hour clock. Thanks all.

Thanks, David. i thought i had it set correctly in Preferences in L&R. Being i was wearing my suspenders and belt at the same time i went back to L&R, cleared what was there and re-entered same to include unchecking and rechecking Time Format fgor 24-hour time. It works now. Thanks again.

How to set colors in cells depending the conditions in alvtree

Hi All,
Could you please provide me idea or sample program how to set colors in cells depending the conditions in alvtree.
Thanks,
Suresh

When running vim in a terminal, it will use whatever colour scheme is defined by the terminal. You should have a look at this thread:
http://bbs.archlinux.org/viewtopic.php?id=51818
Also, check the wiki article on Xdefaults.

How to set field to blank if the data is # or unassigned

hi experts,
how to set field to blank if the data is # or unassigned?
thx

Hi
add the following macro to your workbook (template workbook):
Sub SAPBexonrefresh(qstring As String, resultArea As Range)
    For Each c In resultArea
        If LCase(c.Value) = "not assigned" Then c.Value = ""
       Next
End Sub

How can I get volume on my I6 to hear incoming calls . I went to setting , sounds, and selected a tone, but still no sound for incoming calls, texts, or other notifications.

How can I get volume on my I6 to hear incoming calls . I went to setting , sounds, and selected a tone, but still no sound for incoming calls, texts, or other notifications.

Hi rsample,
Thank you for visiting Apple Support Communities.
Your symptoms make it sound like the iPhone side switch is set to silent mode.
iOS: Understanding sounds, ringtones, and alerts
Set your device to silent mode
iPhone: Toggle the Ring/Silent switch on the side of the device.
Best Regards,
Nubz

The Ringer-Off switch is too inflexible for me... What options do I have?

The Ringer-Off switch is too inflexible for me... What options do I have?
Even with the Ringer Switch off, I still want some alerts and alarms to make noises, and not just vibrate.
It used to be that setting a Reminder could cause a Sound-Alert with the ringer switched off, but this is been "fixed" (broken) in iOS 6, I think.
Only Timer alarms can make sounds (via the speaker) with the ringer switched off, as far as I can tell, although Music and some other Non-Alarm apps can make sounds, somehow. I have heard no good explanation of how this is achieved.
What options do I have in which categories?

ChrisJ4203 wrote: Okay, now we are getting somewhere. You do not want to use the mute switch.
Yes, I said that a couple of times, athough Ringer switch ON and OFF have unspecified senses, as I noted, so I said "Sound Enabled" to clarify.
I have been giving feedback to Apple for 27 yrs now, 100s of them, with not a single one acknowledged or implemented. Much better chatting here, and similar sites.
Since we cannot control Apple (Ha!) or encourage or affect them, it seems the switch must not be used to disable alerts and sounds, but to leave that to smarter software.
The "Do Not Disturb" switch is getting closer, but needs much much more flexibility, including for example, Sounds when email arrives from a specific person (like the ring-twice, and Allow Calls from Favourites, which I would NEVER do.)
An Allow-Calls from these numbers (list: x, y, z) would be nice, as Favourites includes people I would never want to interrupt me.
Perhaps Do Not Disturb by a 3rd party? Anyone know of such a thing?

TS2634 My iPhone 4s does not ring for incoming calls. Ring tone is set/settings/sound. It used to ring. I think it has to do with updating to IOS 7.0.4? After updating IOS 7.0.3 my microphone stopped working. Had to clear/reload.

My iPhone 4s does not ring for incoming calls. Ring tone set and used to ring. I think it has something to do with updating the IOS 7.0.4. When I updated to 7.0.3 the microphone stopped working. Had to call Apple Support and cleared phone and reloaded. ($57 charge). Any suggestions?

Start with your finger at the bottom of the screen (about even with the home button) and swipe in an upward motion. There should be a row of icons at the top of a grey field. if the quarter-moon icon is bright white, tap it. If it was (and still is) dark, take the iPhone in to be evaluated by a qualified technician.

How to set different nr of e.g dia wp for different op.modes when in instan

I wander how to set different nr of e.g dia wp for different op.modes when in instance profile the nr of wp is fixed.
thx in advance

yes u can create the operation mode by using tcode rz04. the steps are:-
1) run the tcode :- rz04
2: select the operation mode then click on create instance (create ur instanace for eg :- day mode and night mode)
3)click on operation mode select the timetable then select normal operation(24 hr)->assign the modes (means select the time by double click and then right click on that select assign and give the mode eg:- day mode ) same way give another modes.Incase if there is any problem then please let me know.
4)go to back -> click on instance/operation mode ->select create new instance->give the host name & click on current setting and save it the diaglog window will appear give the operation mode name eg day mode then if you want to increase or decrease the work process by cliking on + and - tab u can change it after that save it the WP authorization some kind of this window will appear click on yes then new instance mode will appear give the instance name eg night mode then save it again dialog window will appear do changes in work process according to ur requriement and click on save again the same wp window will appear if u want to add more operation mode then click yes either no then save it . Now u will able to see ur all operation modes.
operation mode setup
http://help.sap.com/saphelp_nw70/helpdata/EN/c4/3a5e76505211d189550000e829fbbd/content.htm
Operation Mode Switches
http://help.sap.com/saphelp_nw04/helpdata/en/c4/3a5f1f505211d189550000e829fbbd/content.htm
Note 39412 - How many work processes to configure
cheers
dEE

After update to OS4.2.1 I can not get the ringer to work for incoming calls

after update to OS4.2.1 I can not get the ringer to work for incoming calls. If I set Vibrate on, that's the only notification I get. Tried everything including blowing away ALL my apps and restoring phone to new. Lost all my apps but the ringer still won't ring

God Bless u! LOL I have an otterbox case on my phone and had no clue that the mute button was there....Thank you so much!! The volume on my movies & everything else worked...even when I would go into "settings" and adjust the volume of the ringtone. I knew it was something simple...Thanks again..

Why I am unable to adjust the ringer volume by the side buttons and there is no ringer with the Mute button OFF

With the mute switch OFF - I am unable to adjust the ringer volume by the side buttons.
When someone calls/texts there is no sound coming from the speaker.
The headphone jack works when I listen to the Ipod and the speaker works when I change the ringer volume through settings. So i know that the speaker does work
Headphone jack seems clean and dust free
I heard that there may be a Skype issue than can control the speaker volume - so i deleted it but i still cannot get any sound from regular functions.
When I play the Ipod through the speaker with no headphones there is no option to change the volume and no sound.
If it works when i go through settings to set my ring volume, my ringtone plays - then why does it not work otherwise?

I have Iphone4s 16GB, IOS7.0.4 updates having a problem , that when i press + or - volume keys while my iphone is ringing my iphone 4s goes silent .
Whereas you know silent key is used to make the ringing phone silent. This button is working ok while only problem is my iphone goes silent while pressing + or - volume keys as these keys should increase / lower the ringing volume . These keys were ok working in IOS 6.
Where as these keys are also working ok in music player of iphone for IOS 7, the only problem is for ringing.

HT1413 how to set the ringer to flash the camera flash for incoming calls

Similar Messages

Maybe you are looking for