HT1414 After backp & restoration cannot connect to new carrier

I purchased locked iPhone 3GS in USA and brought it to India where I had to Jailbreak to use it on different carrier. Due to often software crash I went for restoration and backup thro' iTunes from my Windows PC. Itunes has done its job but at the end iPhone cannot connect to the carrier. The message is Please insert SIM card into your phone though the SIM card is inserted. I do not have original AT&T SIM card. Please suggest solution.

Discussion of jailbroken devices is not permitted here per the terms of use.
Goodbye.

Similar Messages

I have no trouble viewing apps in the iTunes Store on my iPad. However, every time I try to install a new app, I get an error message after a while - cannot connect to iTunes Store. This issues cropped up two days ago on my new iPad. Please help...

I have no trouble viewing apps in the iTunes Store on my iPad. However, every time I try to install a new app, I get an error message after a while - cannot connect to iTunes Store. This issues cropped up two days ago on my new iPad. Please help...

JUst experienced the exact same problem after changing password.Getting same message. Hope someone has an answer for this.

How do i get my phone numbers back after i restored phone back to new?

how do i get my phone numbers back after i restored phone back to new?

Where were you syncing the contacts to, iCloud, the computer and Outlook, an email account? That is where you get them back from.

After restore-cannot connect to voicemail-call AT&T?!?

Help I restored my iPhone and now it says cannot connect to voicemail! It doesn't even tell me to call visual?

I had to restore my iPhone last night and discovered the same problem today with my voicemail. In a ditch effort to fix the problem without calling att (afterall, the call center closes after 6pm eastern on Saturday and does not reopen until Monday morning) I tried by calling my voicemail. Here are the step to do that:
1. Dial your 10digit phone number from your iPhone. Then press call.
2. You should hear your voicemail pick up at which time you need to push the * key
3. After you push the *
You may then be prompted to enter your voicemail password, if so, go ahead and enter it. If not, then you should be able to hear all of your voicemail messages that are on the AT&T system, not what on your phone.
4. Go ahead and hang up.
5. Go ahead and try to look at your voicemail.
6. It should be able to connect and ask for the passcode.
It worked for me, hopefully it will work for you.
These are the same step you would use to access your voicemail from another phone other than your cell phone.
***Remember that they always say you should press and hold the "1" unitl it dials your voicemail, but that does not work on the iPhone as it does not support one-touch dialing and it already has visual voicemail.

After OS4 upgrade cannot connect to iTunes Store???

Hey guys,
I upgraded my 3GS software to OS4 and since then I am unable to connect to the itunes store from my phone. I can connect to the internet using Safari and i can access the store when I connect my phone to my laptop. But when i try to connect to itunes store just from my phone through wireless, it just says "Cannot connect to itunes store".
My internet connection/Wifi is super, there are no problems there.
Pls help me out with this glitch. Its annoying!
Thanks a ton!

I think this might have something to do with using 2 iPhones on 1 computer. My boyfriend and I each bought an iPhone 4 yesterday - mine works fine (I was the first to connect to iTunes). My boyfriend connected his to iTunes after me, then when he disconnected from the computer and tried to access the iTunes store through wifi it came up with the "cannot connect to iTunes store" message on his iPhone.
I created a new user on our laptop and downloaded iTunes again. I connected my boyfriend's iPhone and restored to factory settings and this seemed to do the trick!!!! Hope this helps!

Officejet 6500 e710n-z cannot connect to new iMac Mavericks 10.9.5

I"ve had the Officejet al in one for a year or more now and it has worked fine connecting well to my old Macbookair (10.5.8) with few problems printing wirelessly. Since getting a brand new Imac with spanking new software I cannot connect. There seems to be no printer drivers in the imac so I downloaded the full HP suite. Still using
system prefs>
printers and scanners>
add printer
nothing appears. Not recognised. At all. Updated OS. REbooted printer. Reconnected to network router (BT Home hub5) form scratch. Only recognised when I attached it to USB, but as soon as I unplugged it was 'offline' despite both imac and OJ being connected to same network router. Can you help...? Your helppages simply direct me to go through the steps referred to above ie how to 'add' a new printer in the OS system prefs (which I can't as it simply does not show up unless connected by wire, which defeats the object...).
Thanks
Trevor P

Hi @trevorpick , and welcome to the HP Forums!
I see you're running into printing issues. I would like to help.
I would suggest deleting the printer from your print system, using this document: Uninstalling the Printer Software.
Once you have deleted it, I would suggest verifying and repairing the disk permissions: About Disk Utility's Repair Disk Permissions feature.
I would also suggest running your Apple updates: OS X: Updating OS X and Mac App Store apps
After the updates, I would recommend readding the printer via OS X v10.9 Mavericks: Installing and Using the Printer on a Mac
Once it is readded to your system, I would recommend this document on Wireless printing center Troubleshooting Issues.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Hello iupgrade my ipad to ios7 after it upgraded cannot connect to wifi i do all things that i read on apple support

hello iupgrade ipad to ios7 after the upgration not conect to wifi and shows the message connot able to connect i do every things that i read on apple forum but at this moment cannot connect to wifi my wifi modem is tp link

You are in Recovery Mode. Follow the instructions below to recover your iPad.
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button.
5. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: You need to be patient and repeat the above many times to recover your iPad. Data will be lost.

Cannot connect my new nook to the airport utility wireless

I have a new nook and am trying to access the wireless to purchase a book and cannot do so. I think I know my password, but am not sure. I called Apple and they told me they did not have it and now I am studk. Help! Thanks!

I have the same problem. I can connect at the Barnes and Noble store and in my office, but I cannot connect at home. Other people can connect to Airport with MACs and PCs. Both my iPhone and iPad2 have no problems connecting. Is there anyone out there who can help?

IPhone 6 cannot connect to new car

I have a 2014 Murano and cannot pair my new iPhone 6 with the bluetooth audio of the car. The phone is connected and works very well but I cannot get the music to connect. I've been through everything with Apple including wiping the device, networks resets everything they have recommended and I cannot get it to connect. Any thoughts?

Glad I didn't buy a Murano. Works fine with my phone and both Apple and BMW use standard Bluetooth protocols so I wouldn't look for any update from Apple.
If you think all Murano users are unable to connect you might want to tell Apple here: https://www.apple.com/feedback/iphone.html

After a while, cannot connect to WRT320N through 192.168.1.1

I have a WRT320N with latest firmware 1.0.03.
Everything works OK other than the fact that after a while (hours / days) I cannot connect to the router through http://192.168.1.1 but I have connection to the internet though. If I restart the router, I cannot connect to it but after a while I can't do it again. When I try, browser stays for minutes and eventually gives me the "Page not found error". This is happening from any computer (I have 4 computers wired and 2 wireless). The wired computers are connected through a GbLan switch and they have different OS: Vista(x64), XP(x86), Windows Server 2003 (x86) and Windows Server 2008 (x64). The 2 computers wireless connected are Windows 7 (x86) and Windows 2000. From all of them I have the same problem and after restarting the router I can connect again from any.
This behavior had been in place from the beginning but not being under pressure because I rarely have to change something in router's settings, I did not report it in time and now it seems is out of warranty.
My question is if this is something that happened to others (but I was not able to find any similar reports) or is it something wrong with my router? As I said before, other than that, router is functioning without any issues.
Thank-you

Is someone using bittorrent or any p2p software? p2p software, downloading using torrent opens a lot of TCP port, hogging the router's resources. Thus, accessing the router's gui is sluggish or not even opening up.
Upgrade the router's firmware.

I cannot connect my new iPad mini to my iPhone 4S by bluetooth

Hi there,
I have just got my iPad mini wifi .
In the apple store the assistant showed me that it was possible to Bluetooth with my iPhone 4S
Now I am home I cannot connect the 2 devices .
I have reset both devices as well but the only device discoverable is my daughter's laptop.
Her iPhone 5 is not discoverable either.
What am I doing wrong ?
Thanks folks,
Ken

Other than the Hotspot feautre, there is no way to connect iPad and iPhone through bluetooth, because there's nothing they can do when connected.
I am assuming what the person at the Apple Store showed you was the Hotspot feature, in which case you need to Turn on Hotspot, and then turn on Bluetooth.
http://manuals.info.apple.com/en/iphone_user_guide.pdf

HT1414 After a restore, the iOS device did not restarts. what is next step?

After a restore, the iOS device did not restarts. what is next step?

Try a reset. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. This can take up to 20 seconds to react.

Cannot connect to new DB by tnsname entry.

I created 2 oracle home, /stage/product/10g and /oracle/product/10g. Both are using /oracle as $ORACLE_BASE. I am not sure if this is ok, if the $ORACLE_BASE is not part the access path of $ORACLE_HOME.
Then, I created a database (SID=stage) with $ORACLE_HOME as /stage/product/10g and listener tnsnames.ora. With my oracle logon setting, I can connect to oracle as sqlplus username/password, but I cannot connect as sqlplus username/password@stage. Got the error: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor. I got error: ORA-12560: TNS:protocol adapter error while I am trying to connect from remote server. Where is my problem?
Thanks for help,

Here is the information:
ldrpadxdb01|stage|/home/oracle $ id
uid=101(oracle) gid=105(dba) groups=105(dba),106(oinstall)
ldrpadxdb01|stage|/home/oracle $ env | sort
AGENT_HOME=/oracle/product/agent10g
_=/bin/env
CVS_RSH=ssh
G_BROKEN_FILENAMES=1
HISTSIZE=1000
HOME=/home/oracle
HOSTNAME=ldrpadxdb01
INPUTRC=/etc/inputrc
LANG=en_US.UTF-8
LESSOPEN=|/usr/bin/lesspipe.sh %s
LOGNAME=oracle
LS_COLORS=no=00:fi=00:di=01;34:ln=01;36:pi=40;33:so=01;35:bd=40;33;01:cd=40;33;01:or=01;05;37;41:mi=01;05;37;41:ex=01;32:*.cmd=01;32:*.exe=01;32:*.com=01;32:*.btm=01;32:*.bat=01;32:*.sh=01;32:*.csh=01;32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.gz=01;31:*.bz2=01;31:*.bz=01;31:*.tz=01;31:*.rpm=01;31:*.cpio=01;31:*.jpg=01;35:*.gif=01;35:*.bmp=01;35:*.xbm=01;35:*.xpm=01;35:*.png=01;35:*.tif=01;35:
MAIL=/var/spool/mail/oracle
OEM_HOME=/oracle/product/agent10g
ORACLE_BASE=/oracle
ORACLE_HOME=/stage/product/10g
ORACLE_SID=stage
PATH=/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/home/oracle/bin:/stage/product/10g/bin:/stage/product/10g/OPatch:/usr/bin/cc:/home/oracle/dba/scripts
PS1=ldrpadxdb01|$ORACLE_SID|$PWD $
PWD=/home/oracle
SHELL=/bin/bash
SHLVL=1
SSH_ASKPASS=/usr/libexec/openssh/gnome-ssh-askpass
SSH_AUTH_SOCK=/tmp/ssh-VAItjx8945/agent.8945
SSH_CLIENT=10.10.10.43 58662 22
SSH_CONNECTION=10.10.10.43 58662 10.10.11.175 22
SSH_TTY=/dev/pts/3
TERM=vt100
USER=oracle
ldrpadxdb01|stage|/home/oracle $
ldrpadxdb01|stage|/home/oracle $ lsnrctl status
LSNRCTL for Linux: Version 10.2.0.5.0 - Production on 16-JUN-2011 19:44:32
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=ldrpadxdb01)(PORT=1522)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.2.0.5.0 - Production
Start Date 16-JUN-2011 16:08:27
Uptime 0 days 3 hr. 36 min. 5 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /stage/product/10g/network/admin/listener.ora
Listener Log File /stage/product/10g/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ldrpadxdb01)(PORT=1522)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC0)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
--====================
listener.ora
--====================
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /stage/product/10g)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = ldrpadxdb01)(PORT = 1522))
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
--=========================
tnsnames.ora
--=========================
STAGE =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = ldrpadxdb01)(PORT = 1522))
(CONNECT_DATA =
(SERVICE_NAME = STAGE)
The SID=STAGE
SQL> select * from global_name;
GLOBAL_NAME
STAGE

HT201270 cannot connect to optus carrier

Is anyone having problems with their iphone4 connecting to their carrier on iOS 6.3.1 ?

There is no iOS 6.3.1.
Have you tried contacting the carrier?

LaserJet Pro CP1525nw cannot connect to new router (Home Hub 2000)

In December, we replaced everything EXCEPT our LaserJet Pro CP1525nw colour printer - new laptop (Dell Inspirion 15), new operating system (Windows 8.1 - 64 bit), new internet provider (Bell) and new wireless router (Home Hub 2000).
Immediately, we were unable to connect to the router. We tried all of the suggestions, including connecting the printer directly to the router - which worked, until we disconnected it and then they could not communicate again.
At the time, the only solution we could find was to connect our printer and laptop via USB cable and print that way - no more wireless printing, so unable to print from phones and iPad, but at least we could print from the laptop.
In the past month, we have become unable to use many of the features on our printer - when we try to select print options, we get the message "HPMSN103.dll has stopped working." So, we can still print, but cannot select options.
We have tried using the CD that came with the printer, and it gets to a certain point and then a fatal error occurs. We have tried downloading the "full solution" printer install program from the HP website, and the same thing happens. We have tried skipping that and just choosing the appropriate printer driver in Windows: if we only use that driver, we get a printer that shows up, but we cannot print if we select it (interestingly, though, we can actually access the printer options!); if we say we have the disc, then we get two printers showing up - we can select print options on the one that will not allow us to print, but not on the one that actually prints. If we try removing one of the printers, they both uninstall and we're back to square one.
So, we WANT to be able to get back to printing wirelessly - after all, we paid (handsomely) for a wireless printer! And we still cannot get our printer and the router to recognize each other. Can somebody help? We don't want to have to buy another printer.
Thanks!

Hi @Capers2 ,
I see that you are experiencing issues setting up the printer on the new router. I will certainly do my best to help you.
Thank you for providing that detailed information.
If the network name has any spaces or special characters, the printer may not recognize it.
The printer is only capable of sending/receiving in the 2.4 ghz band.
If it is set to 5 GHZ network you may need to change to 2.4 ghz. (rename the 5 ghz or shut it off)
The WPA key setting needs to be on AES to work correctly not TKIP.
Multi casting needs to be turned on.
Firewall on router has to have open ports for printer.
If you have Mac Filtering you need to give printer hardware address from Configuration page.
You might need to contact your router company for further assistance to check those settings.
I would reset the printer first to clear out any previous network settings.
Turn the printer off, hold down the wireless button and cancel (x button) while turning the printer back on and don't release the two buttons until the printer stops making noise.
Print out a configuration report and make sure the SSID and IP address are cleared.
Printing a Configuration Page.
The easiest way to setup the printer back on the wireless network is through a Ethernet connection and then switch over to wireless.
Disconnect the USB cable.
Remove any printer software by following these steps:
Go into Devices and Printers , click file then Server Properties, click on the Drivers tab at the top of print Server Properties window. Choose the printer you want to uninstall and click remove. Choose remove driver and package. Any that say Universal PCL 5 or Universal PCL 6 also remove and the Laserjet CP1525nw.
The next screen will give a warning, letting you know that deleting the driver package will remove it from the system. Click yes to say that you are sure you want to do this. (if the printer isn't listed that is OK)
Right click and delete any entries for the Laserjet in the Devices and Printers Window.
Run the uninstall from the CD.
Press the Windows key and the X key together. and select File Explorer, right click the CD for the
printer and left click open in new window.
Connect the printer to the router with a Ethernet cable.
Wait about 1 minute and the printer should have a valid IP address.
Print the configuration page to get the printer's IP address to configure the Wireless.
Type the IP address in Internet explorer's address bar which should open the printer's embedded web services page.
Setup the wireless through here now.
Click on the networking tab, wireless on the left, fill out the network information and apply the settings.
After the confirmation, then disconnect the Ethernet cable.
Now you should have a blue wireless light on the printer in about 1 minute.
Perform a clean boot on the computer and turn off the Antivirus Software. How to perform a clean boot in Windows.
Run the installation again.
If you are prompted to connect the USB cable during the installation, Then immediately after connecting the USB cable, follow the steps in this document to update the drivers so it doesn't error out. A Fatal Error Displays During Software Installation. Then the installation should continue.
Test the printer.
If there is anything else I can help you with, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HT1414 After backp & restoration cannot connect to new carrier

Similar Messages

Maybe you are looking for