HT1414 After restore that showed error code 40 and showed USB connect with itune on touch screen.

My problem
1. can't open my i-phone showed as picture and then i try to restore but showed error 40.
Now still can't swith on my phone.I would like to solve and repair this phone.
Please help me for solve this problem.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Similar Messages

App world error code 31200 and unable to connect with Appworld serverI.I

I am unable to connect with BlackBerry Apps World and when I try to purchase an App, I keep getting error code 31200! I've tried to wipe my tablet and I created my BlackBerry I'd on my computer! Now I can't get on with my Bold 9700 either! Unable to access payment information even on my computer and I'm beginning to think getting another BlackBerry wasn't such a great idea. I'm open to suggestions, thanks............
Solved!
Go to Solution.

Well,I don,t have to return this Playbook after all! I'm so glad I called Tech support at 8776448410 and I got ahold of Spencer in Costa Rica and this guy knows what he is doing! So here is the solution..............
First, wipe your device after backing up your data to BlackBerry Desktop Software if you can. This does work, but you will lose your data you haven't backed up to another location.
Next, get connected to a Wifi source so when your BlackBerry tablet reboots and comes back up in its original startup mode, you can download necessary updates. Once this is done and you have gone through the tutorials to get you familiar with your Playbook, you will need to open BlackBerry Appworld and in thebsearch box at the top right, enter "BlackBerry I'D" if you haven't seen a screen prompting you to do so before this.
Click the "Create BlackBerry ID" icon and start with a new email address. I recommend. Hotmail since are easiest to link to your Tablet . Fill in with a verifiable email address and secure password. Write it down if you have to. Younwill be taken to another page where younput in your payment information so you can buy Apps. You can use a credit card or PayPal. Fill in your info and when done, click "done' or 'save" and you will be taken back to the BlackBerry I'D Login page. Read-enter your info again exactly as the first time and you will have successfully created a BlackBerry ID!
The one thing that threw me is your login username. If you put in your old email address and you tried using that before, the BlackBerry Appworld system sill boot you back out to your login page with an explanation of errors or an error code! I did inform BlackBerry they need to have a knowledge base of codes to assist their customers with! Also, I recommended that BlackBerry create a click to chat live service to help direct traffic. Now that my BlackBerry Playbook is up and running, I'm glad I didn't return it!

SSPI handshake failed with error code 0x8009030c while establishing a connection with integrated security; the connection has be

Hello, I have a sql 2005 server, and I am a developer, with the database on my own machine. It alwayws works for me but after some minutes the other developer cant work in the application
He got this error
Login failed for user ''. The user is not associated with a trusted SQL Server connection. [CLIENT: 192.168.1.140]
and When I see the log event after that error, it comes with another error.
SSPI handshake failed with error code 0x8009030c while establishing a connection with integrated security; the connection has been closed. [CLIENT: 192.168.1.140]
He has IIS5 and me too.
I created a user on the domain called ASPSYS with password, then in the IIS on anonymous authentication I put that user with that password, and it works, on both machines.
and in the connection string I have.
<add key="sqlconn" value="Data Source=ESTACION15;Initial Catalog=GescomDefinitiva;Integrated Security=SSPI; Trusted_Connection=true"/>
I go to the profiler, and I see that when he browses a page, the database is accesed with user ASPSYS, but when I browse a page, the database is accesed with user SE\levalencia.
Thats strange.
The only way that the other developer can work again on the project is to restart the whole machine. He has windows xp profession, I have windows 2000.
If you want me to send logs please tellme

Well here's my problem, maybe you can help. Intermittenly I get a login failed when connecting to a db engine through Server Management Studio using Windows authentication. When this happens the following entries are generated on the server's application event log:
Event Type:        Error
Event Source:    MSSQLSERVER
Event Category:                (4)
Event ID:              17806
Date:                     1/14/2009
Time:                     10:41:31 AM
User:                     N/A
Computer:          <server name>
Description:
SSPI handshake failed with error code 0x8009030c while establishing a connection with integrated security; the connection has been closed. [CLIENT: <ip address>]
Event Type:        Failure Audit
Event Source:    MSSQLSERVER
Event Category:                (4)
Event ID:              18452
Date:                     1/14/2009
Time:                     10:41:31 AM
User:                     N/A
Computer:          <server name>
Description:
Login failed for user ''. The user is not associated with a trusted SQL Server connection. [CLIENT: <ip address>]
I've already ensured that the server is set to mixed authentication mode. Oddly enough, the workaround that I've found is that if I remote desktop into the server, log in and then log back out, Management Studio is suddenly able to connect again. No idea why it works.
As I said before, it is intermitten. Some days it errors on login, other days it doesn't and there are no configuration changes between them. Also, both client and server are in the same domain and same site so there is no VPN or anything in between. I'm really quite stumped. Any help would be great, or if you can point me in the right direction of where to look. Thank you in advance!

Whenever I update from Windows 7 get error 1602, iPod shows USB connection to iTunes, but iTunes will not recognize the device. None of the Apple documentation helps.

Whenever I update from Windows 7 get error 1602, iPod shows USB connection to iTunes, but iTunes will not recognize the device. None of the Apple documentation helps. The Apple Mobile Device driver is loaded and operating. The anti-virus software and firewall are not at fault (were uninstalled, and made no difference). The iTunes on my older machine running Vista does recognize the inoperative iPod (iTunes has detetced an iPod in recovery mode) and allows me to restore the device. Can anyone help to resolve this problem on the Windows 7 PC?

So yu tried all of this:
Error 1600, 1601, 1602: Try the following steps to resolve this error:
Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
Follow the steps listed for Error 1604.
This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
Error 1604: This error is often related to USB timing. Try changing USB ports, uninstalling and reinstalling USB ports, and other available USB troubleshooting steps (troubleshooting USB connections, device not recognized properly, computer won't recognize a FireWire or USB device). If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
Restore and wait for error 1604.
When prompted, click OK.
Close and reopen iTunes while iPhone remains connected.
iPhone should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
If you had then time for an appointment at ther Genius Bar of an Apple store.

Its just on the screen that shows the connect to itunes thing, someone pleaseee help ?

Okay my ipod needs to be restored, but I have a passcode on it, and it wont let me do anything because i have a passcode.its just on the screen that shows the connect to itunes thing, someone please help? i would greatly appreciate it (:

Connect in recovery mode and restore.
If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone and iPod touch software.
If the issue continues after updating and restoring your device, refer to this document
iPhone and iPod touch: Wrong passcode results in red disabled screen

Just updated my 4S to iOS 6 - it shut down after the instait showed a "connect to iTunes" icon.

Just updated my 3GS to iOS 6 - it shut down after the install - then it showed a "connect to iTunes" icon.
iTunes said the phone was in recovery mode & needed to be restored. Clicked "restore" in iTunes & get "iTunes is restoring the software on this iPhone" - didnt work - came back to showing the "connect to iTunes" icon.
Have repeated the process twice now - same result - "connect to iTunes" icon displayed on the phone & iTunes says the phone is still in recovery mode

See Here > http://support.apple.com/kb/HT1808
Be sure to Follow ALL the Steps.
Some Users have reported that as many as 8 or 9 attempts were necessary Before success.

How can i fix my iphone 3gs when i have network issues after updating to IOS 6.1.3 and avoid the connect to ITunes screen?

Im an owner of an Iphone 3gs.
When I updated my software to IOS 6.1.3 I started having network issues such as my phone would go on searching, it would search for signal and then No service after few minutes it would restart and when its on again it would show me Connect To Itunes screen, I tried connecting but nothing happens and if I just leave it as it is it will just keep on restarting and showing the same screen sometimes I might get lucky and the phone will start working again but No Service and if I turn on my 3G for the times Im outdoors it will just restart again so 3G is also another problem I have got. Today I decided to take it to an Apple Store, the guy restored it and now what happens is that it switches on and is showing me the connect to Itunes message but with black backround and i cant do anything it keeps on restarting and showing the same thing. Please if there is anyone that would like to spend some time with me to help me out, he would be more than Welcome.
Im located in South Africa

iOS: Device not recognized in iTunes for Mac OS X

TS3716 Help! My iPod touch won't connect to itunes, but it shows usb connecting to itunes and it doesn't connect to itunes.

I was updating IOS 6.1.3, my iPod touch 5th generation crashed and it showed The image: USB connecting to iTunes LOGO. I waited along time but nothing happeded. Is it in recovery mode or something? I don't know. Please help. Even I plugged in my USB to my pc it doesn't work! It shows nothing but in my iPod touch it shows the USB connecting to ITUNES.

Hello Luke Lukas,
Thanks for using Apple Support Communities.
Stops responding, showing the Apple logo with no progress bar or a stopped progress bar, for over ten minutes.
For more information on this, take a look at:
iOS: Unable to update or restore
http://support.apple.com/kb/ht1808
Best of luck,
Mario

My TV shows USB connect to iTune icon on my television

When I connect my Apple TV to my TV it shows the connect tp iTune icon on the screan. I've try to restart the device but some message coming up.
Can sombody help!!

The Apple TV is in Recovery Mode. You will need to restore the device with iTunes.
ATV 1 http://support.apple.com/kb/HT3199
ATV 2 and 3 http://support.apple.com/kb/HT4367

Since 1 year after replaced my iphone from mobily my iphone need to connected with itunes every time i changed the SIM card

the problem that I have facing when change the SIM card the mobile told me please connect with iTunes even Mobily SIM's.
iPhone 3G 16G Black
Old
New
IEMI
011773008768573
011932008420730
SERIAL NUMBER
88903YM4Y7K
5K9401QZY7K
Appreciate your support to solve this issue.

Sorry to butt in again:
But your original post(s) were not so clear.
So if your original phone WAS locked and the LOCKED one got replaced from the APPLE store...then there is a 100% chance it IS locked.
Sorry, but there is no such thing as a free lunch...
Check with Apple anyways...

I'm getting error code -54 when trying to connect to iTunes store...

Hello,
I have been receiving the following message code all week when trying to connect to the store:
"iTunes could not connect to the iTunes Store, An unknown error occurred (-54).
Make sure your network connection is active and try again"
My internet connection works fine.
Some other strange things that are happening on my MBP with leopard, is that Virus Barrier flashes up IP address after IP address trying to connect to some 5 digit port time and time and time again when I use Skype or any P2P sharing software – rendering them pretty much unusable (a DoS attack maybe?).
I had started this thread beforehand, I don't know if they are related with the iTunes error code mentioned above.
http://discussions.apple.com/thread.jspa?threadID=2485199&tstart=0
Any advice much appreciated.

I got this error after upgrading to new version. After searching these pages for an answer and not finding a usable one, I simply quit and re-opened iTunes, and... voila! Problem solved!

HT2311 I'm trying to down load iTunes 11.1.4, after down load unknown error (-42408) appears and it says problem with i

I'm trying to download iTunes 11.1.4, after download i have still got version 10.39 and when I open iTunes uknown error (-42408) appears and it tells me error at iTunes. please help

Hello phoebe187,
The following article provides steps for resolving this error and getting iTunes working again.
iTunes for Windows: "Error 7" message when opening iTunes
http://support.apple.com/kb/TS3074
Cheers,
Allen

NANO wont show up/connect with Itunes when plugged in!!!

I am trying to change some of my music on my nano and when I go to plug it in... it doesn't show up in Itunes. I recently purchased the iphone and when I plug that into the computer I "CAN" see it... and do updates, etc. Ever since I have been using my iphone with itunes, I am not able to change anything or "see" my nano on the itunes main page. Please help!

I'm having exactly the same problem. And iTunes keeps jumping into the foreground/ launching when it's docked. I want the data from my last and fastest workout in the Nike+ from it-- butI can't even restore the iPod since iTunes won't read it (despite Finder mounting it).

HT4623 tried to update software...phone shows "usb connect to itunes" did that. nothing happening

Tried to update software on iphone..phone displays " connect usb to itunes" did that, nothing happening?? Still showing the usb to itunes

Connect to iTunes and restore the device.
It may be necessary to place the device in DFU mode (google it).

ITunes that shows no connection with certain songs??

I had the latest ITunes open on a HP where is showed a by songs that had to be reconnected. Now I can't find how to bring that screen back up. Anybody know?
Gina

mine had the same problem at first. Try restarting your computer, because your internet browser is obviously working. Restarting worked for me.

HT1414 After restore that showed error code 40 and showed USB connect with itune on touch screen.

Similar Messages

Maybe you are looking for