HT1414 all I have is a blue screen on my 4s phone it won't do anything. can't even shut it off?

All I have is a blue screen on my 4s phone. It won't respond to anything can't even shut it off? Its been like this for over 2 hours
what do I do to fix this?

Have you tried resetting your iPhone?
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off"

Similar Messages

  • Help my mac won't start up all I have is a blue screen!

    Last night my mac failed a security update, which I thought was strange but didn't take too much notice. Now it won't start up all I have is a light blue screen and a grey spinning circle
    Help!

    Nunu,
    Ended up re-installing OS X all seems ok now although itunes won't work. Have downloaded system updates but now quicktime isn't current enought!
    ARRRRRHHHH!
    Well since you have a 450 I would suggest you keep a clone of your updated hard drive. That way if something happens you can just clone back from your update and not have to go through all the updating.
    I've done that with my iBook and it's now crashed 3 times so it's sitting here waiting for me to put in a new hard drive. I have two clones of it so no problem.
    Richard

  • Using 10.5 have had system slow down used pr ram now all I have is a blue screen

    need help used pram to reset system now it either shows the pin wheel turning or sometimes it will go to the blue screen but nothing else. all started when I downloaded one of the security that apple sent to down load.
    need help please what to I do now, are we looking at a bad hard drive?

    sorry if this is a duplicate response first one said error.
    is this the battery under the airport card section?
    also installed a disk for hardware trouble restarted and held the C key came up with mac-boot. did this and I got a file folder with the apple Icon face and a question mark flashing back and forth . what do you think? could all of this just be a loose connection to the hard drive? Battery read on digital meter 3.1 volt dc I know under load this could change.

  • On start up my Mac Book Pro shows a white screen with a spinning wheel. I have tried starting up with the Snow Leopard disk - all I get is a blue screen. I guess that this is a major repair job??????

    On start up my Mac Book Pro shows a white screen with a spinning wheel. I have tried starting up with the Snow Leopard disk - all I get is a blue screen. I guess that this is a major repair job??????

    If you have the exact same problem - take the computer to an Apple store or an AASP.  Whichever is more convenient for you.  If you have AppleCare call them!

  • I have a new I Mac running mountain lion. When waking the computer from sleep, all I get is a blue screen. I have to restart the computer.

    I have a new I Mac running lion 10.7. When waking the computer from sleep, all I get is a blue screen. I have to restart the computer.

    Did you not bring all your important data over from your old computer? Do you have a backup of the iTunes library that you can restore? If not, then its not to late, just more work that it should be.
    You should be able to:
    Backup the device to the new installation
    Transfer your purchases into a newly authorized library
    Recover any other media using third party tools as suggested in this post from forum regular Zevoneer
    Restore the device from the backup
    This process should switch the association of the device to the new library, preserving the data and settings in your apps.
    May also be prudent to attempt a backup to iCloud directly from the device before you start... Settings > iCloud > Storage & Backup > iCloud Backup > On. It won't save any media but it would preserve the general account settings and documents in case anything goes wrong while you are trying to extract your other data.
    When you get it all fixed, make a backup!
    tt2

  • HT1414 my Ipad will not open. All I have is a black screen.  HELP!

    My IPAD will not open. All I have is a blank screen.   HELP!

    Try a reset: hold down the home button along with the power button until you see the Apple, then let go

  • I need to know how to fix my iphone4 I was playing one of my games and a up date poped up and i push it to up date my phone. When it restarted all I have is a white screen and four black dots and all the driffent laughes I can not make any or get any call

    I need to know how to fix my iphone4 I was playing one of my games and a up date poped up I pushed on the up date when it restarted all I have is a white screen with four black dots and all the driffent laughes and a i with a blue circle around it I can not make any calls or get any calls or any thing

    I don't have apps on my phone so i can;t do anything

  • After updating to 1.2 then restarted, I have seen only blue screen

    I have seen only blue screen after Apple logo startup, and now it is stuck like that. Nothing happen anymore. What a bad luck I am with this new iMac, I have to hand in my assignments in 2 days and I cannot even go to finder. If i can do that at least I will copy them to my old Powerbook. What the @#$%^&*( is happening with new iMac. I also have a bad experience with freezing problem many times a day, and I have made my mind to live with it until now. I cannot do anything unless typing a problem on my old lovely powerbook. Please help me, I need those assignments to submit to my professors.

    From the number of posts regarding the same issue with 1.2 and any ipod with a color display (both my ipod nano and video ipod crapped out), there is obviously a serious bug with this "upgrade."
    I agree we should give them a chance, but I find it unacceptable that after this amount of time that the Applecare support technicians, up to TIER 3, have never even heard of this issue. They wanted me to return my ipod(s) in for factory service even after I numerously reminded them that they both work perfectly once downgrading to 1.1.1!
    I am a long-time apple-geek, but this issue upsets me because it is so uncharacteristic of the standards of excellence Apple has always provided, and smacks of the pervasive frustration we all deal with when using Microsoft products.
    ......and it is especially frustrating that all of the purchases I excitedly bought once videos are now provided at 640x480 resolution are not playable with version 1.1.
    But with version 1.2, the higher resoultion videos are transferable to the ipod, but no videos are playable due to this firmware incompatibilty.
    Apple: do you read these discussion forums??

  • I was able to use the program before. Now when I go in all I see id the blue screen with the new upgrade info.

    I was able to use the numbers program before. Now all I see is the blue screen with the new updates. How do I fix this. I have already downloaded the new version of Icloud & open office $ installed.

    Are you talking about doing this on your iphone?  Or something else?

  • HP 100B All-in-One PC Constant Blue Screen upon wake up then Restart

    Hello - I am looking for help since every time I wake up my desktop I get a blue screen error then it restarts and the computer works fine.  I have run a full virus scan with no issues as well as the cmd sfr/scannow  that I saw online.  My drivers and system appears to be up to date since I have no updates listed.  I run the trouble shoot tool once it restarts and  and it doesn't find any issues.
    Can anyone help?
    Thanks

    Hey BSmiles, 
    I'm sorry you're running into this issue with the blue screen.
    By default Windows is set to restart the computer when it encounters an error, but you can change that setting. 
    Click the Start button > Type "system" > Click 'System' > From the left pane, Click Advanced system settings > Click the Settings button in the Startup and Recovery section
    Uncheck the Automatically restart box
    This will keep your computer from restarting immediately after the blue screen. Some people prefer to do this so they can read the STOP error code. 
    Next I'll need the minidump file to see what is causing the blue screen. Navigate to C:\Windows\minidump. You'll need to upload the most recent .dmp file to a third party site, (like sendspace.com or filedump.net, or another site like those) since the HP forums do not allow this type of file upload. Just provide me with a link to which ever site you choose so that I can take a look at the .dmp file.
    If you have any questions about that please let me know I'll keep an eye out for your reply

  • Nothing will load. All I have is a black screen

    Nothing will load after downloading the app on the iPad. All I have is a black screen. Please help.
    I have even deleted the app and redownloaded

    Did the app download successfully and install,  but you are unable to add photos to it or did the screen go black when you tried to run the app?
    Pattie

  • I restarted my iMac and all I have is a gray screen and a color wheel .

    I restarted my iMac about an hour ago and all I have is a gray screen and a rotating color wheel.

    Follow the steps @ > Mac OS X: Gray screen appears during startup

  • My battery died and started to charge n all o have is a white screen

    my battery died and started to charge n all i have is a white screen

    I don't have apps on my phone so i can;t do anything

  • I downloaded adobe photoshop and it crashed my computer and now I have a frozen blue screen. Please advise.

    I downloaded adobe photoshop and it crashed my computer and now I have a frozen blue screen. Please advise.

    Due to the current unavailability of clairvoyants and mind-readers in the forum, we respectfully request you supply sensible, complete details.
    BOILERPLATE TEXT:
    Note that this is boilerplate text.
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    etc.,
    someone may be able to help you (not necessarily this poster, who is not a Windows user).
    a screen shot of your settings or of the image could be very helpful too.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • T61 - Blue screen error message (nv4_disp) - Now computer won't even start!

    Hi I have a Lenovo T61 (Type: 7662-CTO) Windows XP.
    A couple days ago, all of sudden my screen turned in a yellowish hue, started flickering intensely and froze; I had to manually shut it off (by pushing the power button).
    Next day, I started my computer and it worked fine until I had the exact same flickering and freezing issue, but this time, the screen didn't turn in a yellowish hue. Once again, I manually shut it off and went to bed.
    This morning, however, when I started my computer, my screen went totally blank, though I could hear my computer running. I hooked it up to my TV to see if anything comes up and that's when I got this blue screen of error message.
    It says:
     ================================================================================
    Problem has been detected and windows has been shut down to prevent damage to your computer.
    Problem seems to be caused by the following file: nv4_disp
    If this is the first time you’ve seen this stop error screen, restart your computer.
    If this screen appears again, follow these steps:
    The device driver got stuck in an infinite loop. This usually indicates problem with the device itself or with the device driver programming the hardware incorrectly.
    Please check with your hardware device vendor for any driver updates.
    Technical information:
    ** STOP: 0x000000EA (0x8A4803C8, 0x88FFD500, 0xBA4EFCBC, 0x00000001)
    nv4_disp
    beginning dump of physical memory
    physical memory dump complete.
    contact your system administrator or technical support group for further assistance.
    ==================================================================================
    It would show this blue screen very briefly and rebooted by itself (without letting me log in windows), so I had to once again manually shut it off.
    I thought perhaps cleaning a fan might help, so I opened up my laptop, cleaned the fan, keyboard, palm rest etc and assembled it back together.
    When I turned on my computer, now I'm getting NOTHING. Not even a blue screen. Computer would start, but very briefly after (just a few seconds after), it would just shut it off by itself. 
    Someone please tell me what's wrong with my computer and if I can revive it at all.
    Also, would you recommend me to bring it to the local Lenovo repair center (http://bplocator.lenovo.com/)?
    Thanks so much for reading a long message.

    marissa07, welcome to the forum,
    marissa07 wrote:
    ......snip..
     ================================================================================
    The device driver got stuck in an infinite loop. This usually indicates problem with the device itself or with the device driver programming the hardware incorrectly.
    Please check with your hardware device vendor for any driver updates.
    ==================================================================================
    Have you tried updating your graphics driver? 
    Error message in Windows XP: "STOP 0x000000EA THREAD_STUCK_IN_DEVICE_DRIVER"
    You can find the latest driver for your system here. Another option would be to run ThinkVantage System Update, which is hopefully on your system, if not you can find it here.
    I'm not saying this is the solution or ruling out a hardware problem, (which the flickering suggests), but it's a good place to start
    Let us know
    Andy  ______________________________________
    Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
    Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
      Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
    PepperonI blog 

Maybe you are looking for

  • REALLY need help on this one... befw11s4 w/ Xbox 360

    My system 2 PCs hard wired. 2 Printers wireless.  Running XP.  Also have Directv DVR and Xox 360.  Everything used to function correctly. Now DVR and XBox wont connect to BEFWS11 V2.  I have reset everything and started from scratch.  I have also dis

  • How to improve performance of insert statement

    Hi all, How to improve performance of insert statement I am inserting 1lac records into table it takes around 20 min.. Plz help. Thanx In Advance.

  • How can I use a custom picture for my avatar?

    How?

  • Error in windows installer

    Am trying to register my new iPhone 3Gs and downloaded the iTunes Windows Installer 64bit and it did not finish executing as it comes up with error saying there is a problem with the Windows Installer. does anyone know how to overcome this issue?

  • All button in query execution

    Hello All, When I am trying to execute a query, i see the following buttons 'Execute', 'Check', 'Save Variants', 'Load Variants', 'Delete Variants', 'Personalization', and 'Cancel'. But another user can see an additional button 'ALL'. When is this se