HT1414 an error 1015 popped out and it stopped restoring my iphone 3g. Please help
error 1015 stopped restoring iphone 3g. Please help find solution here
This most often means that you previously hacked your phone to downgrade the iOS or jailbreak, and the modem baseband (firmware) was altered. In that case, SOL - there is no way to restore or update to a stock iOS again.
There are some "alternative" methods that will get the phone out of recovery mode and usable again, but it will remain in a hacked and unstable state. Google to find these.
"Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state."
Similar Messages
-
My iphone is at tech service and since it is in guarantee period most probably they will give a new one.Thats why I want to deactivate or sign out my apple ID from that Iphone. Please help me, what shoud I do?
Wow... you seriously over paid for an iPhone.
That probably explains why you have/had no clue you were purchasing a locked device and think it's an Apple problem to get it unlocked. -
HT201210 hey my iphone software died and everytime i restore it ,it fails please help me
hey my iphone software died and every time i restore it , it fails please help me
i get an erorr telling me the iphone could not be restored
State the exact error message, including any numbers. -
I have an iphone 5 and i just updated it to ios7 and it kept asking for codes and wouldnt accept any and now it just says iphone disconnected.please help
Are you attempting to synchronise new or existing photographs between your devices? My Photo Stream can only synchronise new photographs.
-
While editing photos in Aperture, I trying to make an "auto" adjustment to the exposure,
but the "auto" button is grayed out and will not allow any auto function to take place.
Please help!
Thank you,
MikeMike, are you working with raw images?
For some raw images auto exposure is not available, have a look at this manual page:
http://documentation.apple.com/en/aperture/usermanual/index.html#chapter=18%26se ction=9%26tasks=true
Note: Automatic exposure adjustment is available for Aperture-supported RAW images only. If you want to adjust the exposure of another file type, such as JPEG or TIFF, see Working with the Exposure Controls. For a list of supported RAW file types, go to the Apple website at http://www.apple.com/aperture/specs. -
I want to merge several photos together and in both my CS4 and Bridge, it will not open photomerge. A dialog bo opens up that wont let me close it.
Please help.Exact versions of your OS and of Photoshop, please. Not just "Photoshop CS4".
Machine specs, please.
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks! -
-1 error keeps coming up unable to restore iphone 3gs,had to delete whole computer due to virus so no backup of itunes,please help,tried in plugging usbs,
restarting computer etc..please help.
Must have tried to restore 20 times .http://support.apple.com/kb/TS3694#error1
-
Please help, I am trying to restore my iphone 3gs, but i keep getting errors like 11 which is not listed in this site and i alos get error 1 and -1. please help.
Did you manage to fix the issue?
I have exactly the same issue as described above : I installed the update 5.1.1 on my iphone 3GS and since then, I can not turn it on anymore. In Itunes, I get an error 37 when I am doing a restauration and it stops.
This error has nothing to do with firewall : I tried to restore the phone on several computers, including in an Apple reseller and it did not work anywhere.
I spent several hours on phone with the hotline from Apple which arrived to the conclusion that it is a hardware issue, but the phone was working perfectly fine until I installed this update! -
PLease help me...
What if I purchase a device that is still linked to the previous owner's account?
Contact the previous owner as soon as possible and ask them to erase the device and remove it from their account.
Find My iPhone Activation Lock: Removing a device from a previous owner’s account - Apple Support
There is no alternative solution -
Help
same for me. Via safari I can log in to my FB account but with the app no luck . . .
-
Help, please!! I just lost a year of work on my Dragon Vale game : (. I opened the app as usual and got a grey box message: "Game Centers terms of service have changed. Enter your Apple ID". Which I tried over and over to do but it would not accept it! Then another. Essage came up: "You have been logged out. Do you want to log in or vreate a new account?". The buttons below said "new accou t" and "cancel". I did not want to create a new account - I wanted my old account back so I pushed cancel. A new account page opened and my game was back at square one : (
I would appreciate any advice. Thank you!!!Follow this feed, I'm keeping it updated with what we know.
https://discussions.apple.com/message/19592911#19592911 -
I woke up this morning - xmas day of all days and had a message on my phone that it needed to be restored via itunes. I connected it to my laptop and it tried to restore but failed at the point of iphone firmware update. I have back-ups etc - I have tried it on two different laptops and have tried at least 10 times but keeps failinhg at the same point - has anyone else had this and found a cure or is the phone dead. Its on ios 6.0.0.1
Error -1 could indicate a hardware issue. You may need to take the device to an Apple Store and have it looked at
Read here > http://support.apple.com/kb/TS3694
Sorry for the bad news -
Wifi and iCloud buttons are disabled (iPhone 4s) - please help!
My wifi connection was dropping out intermittently. I read on a post I'd seen previously that I should disable my iCloud function to see if wifi started working again - it didn't.
I re-set to factory settings but because I'm unable to use wifi I am also unable to use icloud to re-set my phone. It's a nightmare.
Any advice would be gratefully received.Hey there Abdulrahim0259,
I would recommend that you use the following 2 article to help troubleshoot the Wi-Fi and bluetooth issues you are seeing, respectively:
iOS: Troubleshooting Wi-Fi networks and connections - Apple Support
And:
iOS: Troubleshooting Bluetooth connections - Apple Support
Thank you for using Apple Support Communities.
All the very best,
Sterling -
I received this errir msg when I wants to sync my 3gs iPhone. And I already update my iTunes to 64-bit. "This iPhone cannot be used because the required software is not installed.Run the iTunes installer to remove iTunes, then install the 64-bit version itunes".
First make sue you are installing the 64 bit version of iTunes.
Second make sure it is iTunes 10.7 or later.
I would download a fresh copy of the 64 bit version of iTunes 11. After installation reboot your computer.
Before connecting your phone reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem. -
I had jailbroken my ipod touch then decided it didnt do much of anything, so I decided to restore my ipod. But itunes didnt finish the restore and left me in recovery mode. Now it says iTunes has detected an ipod in recovery mod, but when I try to restore it, it says something like could not connect to apple restore firm and I'm back to square one.
Any Help is appreciated!Jailbreaking
Jailbreaking voids the Apple warranty and also means that you will not get any support from Apple, including from this Apple forum. Jailbreaking can't be discussed in this Apple forum.
Unauthorized modification of iOS has been a major source of instability, disruption of services, and other issues
Try DFU mode and then restore
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Try on another computer
Maybe you are looking for
-
Is there a way to make sure my MBP doesn't use a particular resolution or ?
This may be a stupid question. I am hooking my MBP to my lcd tv. When I first connected the television, my tv displayed the message "mode not supported". Having played a little at this I simply went to my display preferences and looked at what resolu
-
What is the difference aside from size between the 15 and 17 inch MBP
im trying to decide which one to get. money is not the issue here. I do need to carry on the laptop in my camera bag worldwide. I want the fastest most adept laptop. Photoshop ( when they offer the new version ) and garageband must run very smoothly.
-
Impossible Debug. Infuritate situtation
Hi. I did a post in the past about this sistuation: I CAN NOT DEBUG WHAT THE HELL IS GOING ON INSIDE DPS WEBVIEW. My application is very well written: it is using RequireJS via CoffeeScript, compiled with NodeJS (so "you forgot the semi-colon in the
-
Hi Abapers, I have done one alv which was executing fine. suddenly it went to dump Runtime error: READ_REPORT_LINE_TOO_LONG. please help me... very urgent.... points will be rewarded.
-
No Save Button????
Is there anyway to customize the toolbar to put a save button on it? I can't believe with all the custom choices listed, "Save" is not included as an option. I don't know what Apple was thinking with it's exclusion. It's so handy to have when using W