HT1414 Display does not go into landscape mode

Help My iphone 5 display does not go into landscape mode and the rotation lock is not on . I done reinstalling the lates versionof iOS and restore my back up and restart my phone it dosen't work. My phone was work few days ago after updating some apps it doesn't work in landscape mode for photo, music, vidoes,Safari, calculator and Calander. 

Restore it to factory default and do not restore from your backup; test it out again...if issue presists their may be a hardware failure with the device that is preventing this7

Similar Messages

  • Why does my display does not go into landscape mode?

    My iPod touch 3G on iOS 4.3.5 will not enter landscape mode. It's been doing this for a while.
    AND YES, ROTATION LOCK IS NOT ENABLED.
    So anyway, my warranty is not covered anymore and it costs $30 CAD for a single telephone call. What a rip off! Anyway, I'm not buying that. Should I go to the genius bar?
    BTW, sometimes it rotates when I just restore it but then later it will not work.
    I've found another person with the same problem and here is his theorie:
    "I belive that at one point our ipods got over heated and it was so hot that the accelorometer was fried and detached from the motherrboard."
    So yea. What should I do?
    Thanks in advance!
    Zach

    Try restoring from DFU mode: http://www.iclarified.com/entry/index.php?enid=1034

  • In my iPhone the images and videos are not changing into landscape mode

    In my iPhone the images and the videos are not changing into landscape mode. And it is switching off  automatically

    Hi vijenderreddy,
    Thanks for using Apple Support Communities.  This article has some steps to try if your iPhone is unexpectedly powering off:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    For the issue of images not changing orientation, see this article:
    iOS: Screen does not rotate
    http://support.apple.com/kb/ts3805
    Cheers,
    - Ari

  • IPhone 6 screen does not rotate into landscape

    iPhone 6 (iOS 8.1.2) 4.7 inch screen does not rotate into landscape. I am sure that portrait orientation lock is off. I restart the phone (holding power button and home button together) and it didnt fix. How can i solve this issue? This is annoying.

    onur136 wrote:
    iPhone 6 (iOS 8.1.2) 4.7 inch screen does not rotate into landscape. I am sure that portrait orientation lock is off. I restart the phone (holding power button and home button together) and it didnt fix. How can i solve this issue? This is annoying.
    Check to see if Calculator will rotate into landscape mode.  Not all apps support rotation.

  • My computer has been acting weird lately.  Shuts itself off, the mouse goes off in all angles, does not go into sleep mode sometimes and instead shows on a gray screen definitions of words in 3" letters!  Do I have a virus?

    My computer has been acting weird lately. Shuts itself off, the mouse goes off in all directions, does not go into sleep mode sometimes, instead shows a gray screen with word definitions in large 3" letters that continuosly flows across the screen.  Do I have a virus?

    Doesn't really sound like a virus.
    See if the Disk is issuing any S.M.A.R.T errors in Disk Utility...
    http://support.apple.com/kb/PH7029
    How many of these you can answer...
    Open Activity Monitor in Applications>Utilities, select All Processes & sort on CPU%, any indications there?
    How much RAM & free space do you have also, click on the Memory & Disk Usage Tabs.
    Open Console in Utilities & see if there are any clues or repeating messages when this happens.
    In the Memory tab, are there a lot of Pageouts?

  • I recently bought a Macbook Air and a Thunderbolt Display and the laptop's power is supposed to come from the display, but the power cable on the display does not fit into the Macbook Air.

    I recently bought a 11" Macbook Air and a 27" Thunderbolt Display.The laptop's power is supposed to come from the display when connected, but the power cable on the display does not fit into the Macbook Air.

    If your MBair is a 2012 model, it has a Magsafe 2 power connection.  The monitor probably has the old magsafe connection.  If this is the case, you need this adapter.
    http://store.apple.com/us/product/MD504ZM/A?fnode=5a

  • CRVS2010 Beta 2 - report does not print in Landscape mode correctly

    I am using Crystal Reports Beta 2 for Visual Studio 2010 on Windows XP. I am trying to print a report in landscape mode. The WPF Crystal Report Viewer displays the report correctly in landscape view. When I print it, it moves all the data to the center of the page, prints it in smaller font and to the left and cuts off a lot of the data on the right hand side.
    I have tried various different suggested solutions from reading other forums and nothing seems to work. Is this a known Crystal Report Viewer issue?
    Solutions I have already tried:
    1. Page setup under Crystal Reports - selected no printer (optimize for screen display)
    2. Page setup under Crystal Reports - checked dissociate formatting page size and printer paper size
    3. Setting paper orientation and page orientation at run-time to landscape.
    4. Printing to different printers
    Something to note, I can export this report as a .pdf file and it prints perfectly from adobe. This only seems to be an issue when printing directly from the WPF Crystal Report Viewer to the printer.
    Any help would be greatly appreciated! I have been stuck on this issue for a while...
    Thanks!

    Hi Sharon,
    There have been issues with printing and printers in CR 2008 and the same routines are in CR 2010. The patches we have done to help with standard paper sizes in CR 2008 are not in the Beta releases.
    Not sure if they will make it into the GA release next month. As a work around I suggest you continue exporting to PDF and then printing the PDF file until they have been resolved and patches are available.
    Thank you
    Don

  • My iPod touch is not turning into landscape mode on the left side

    It works when I turn it to the right, but not the left. I also can't turn it back into portrait mode when I'm done. I've tried rebooting it, and the accelometer seems to be working in an app such as Emoji Free, where I tilt the device to move the Emoji.

    Without knowing what you actually tried:
    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable                     
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • My iPhone 6 plus does not turn on landscape mode! please help!

    hi, so i just got my iPhone 6 plus today, i started playing with it and realized that the landscape mode doesn't work and tried messing with the settings but its not working. the little lock icon is not on and it still doesn't work! is my iPhone broke?

    I Have the same issue. Not only in home screen but in all apps...
    only nly after restarting the iPhone it works.
    I Also went to messages app, shake the phone to see if the "undo" appears, And it does... So looks like a software glitch

  • MacBook Pro (late 2008) automatic boot, does not get into sleep mode

    Good evening from Germany,
    I have a problem with my MBP (5,1). Since last tuesday the MBP boots automatically after it had been shut down if the power chord is still attached to the MBP. As well when closing the lid it goes into sleep mode but after a couple of minutes it tries to wake itself resulting in lighting up the Apple logo on the back of the lid. After that it goes into sleep mode again and starts all over with the procedure ...-wake up-lid still closed-sleep-wake up-...
    I did not install or update any software since that day, the power management options "wake on LAN", and "restart after powerloss" are decativated. I do not have any scheduled boot or shut down times set. I removed all login-items, had a look for the "com.apple.AutoWake.plist" and deleted it. I do not have or had any eyeTV application installed. I have no clue what could have caused this behaviour.
    In case it helps, this is an excerpt from the system.log
    Feb 28 18:12:01 mooxmacbook mDNSResponder[18]: mDNS_FinalExit failed to deregister service: 100831D28 mooxmacbook.rfb.tcp.se\.pieper.members.mac.com.
    Feb 28 18:12:21 localhost com.apple.launchd[1]: * launchd[1] has started up. *
    Feb 28 18:12:27 localhost mDNSResponder[17]: mDNSResponder mDNSResponder-214.0.2 (Dec 15 2009 16:58:04) starting
    greetings
    flyingA

    That's what I was guessing as well. But unfortunately there is no other device connected to the MBP.
    Here's a list of what I've tried so far:
    - login-items deleted
    - PRAM & SMC reset
    - no boot schedules
    - System Preferences Energy "Wake on Ethernet activity" deactivated
    - System Preferences Energy "Automatic reboot after power-loss " deactivated
    - eyeTV not installed (was never installed before)
    - "com.apple.AutoWake.plist" in /Library/Preferences/SystemConfiguration/ deleted
    - mobileMe sync deactivated
    - ComboUpdate installed
    - booted in Safe Mode and tested
    - setup new user and tested if the problem persists (in Safe Mode too)
    - fresh install using a Time Machine backup
    Well thanks for the that but let's keep writing in English I guess that's easier for both of us.

  • Satellite A660 does not go into hibernate mode

    My machine Satellite A660 no longer goes into hibernate mode. The action button is there and the screen goes blank but it goes no further. Sleep and shut down still operate OK.
    I tried everything I can see on Windows site to no avail.
    If anyone can help would be appreciated,
    Jeff

    Hi
    So new OS installation did not fix this?
    Strange!
    Try this:
    Type in Start menu: CMD and then hit Ctrl + Shift + Enter to open the Command Prompt with Admin rights.
    Now black DOS window should open.
    Now type: powercfg /hibernate on
    Then type: exit to leave the box
    Then type Power Options in Start menu and hit enter.
    Now choose the power plant you are using and click on Change plan settings
    Now choose Change Advanced Power settings.
    Then choose Sleep and choose ON for Allow hybrid sleep
    Now you should see in Start menu new Hibernate entry.
    This should help you to use hibernation mode.

  • After updating my 4s to iOS 6, it does not go into standby mode.

    Is anyone facing this problem too? Before I've updated to iOS 6, I didn't have this problem. (My phone will go into sleep mode after 1 minute)
    I've set the auto-lock to 1 minute.
    I would appreciate the help. Thank you!

    If you have an Exchange/Google account, delete it. Then reboot. Then look if your usage is different. If so, you could re-add your Exchange account without Calendar, but I advice you to only add it if you are using a Wi-Fi, (because this will consume some traffic).
    If the usage stays the same, do the same but with your iCloud account. And only re-add it using Wi-fi too.
    Hope I can help.

  • Iphone 4s does not go into recovery mode

    My friend lost her passcode and got locked out. only solution was a recovery, i know all the steps and just did it to an ipad2 but this iphone is a little weird, instead of going into Recovery mode when connected to the computer while holding the home button, it goes into mass storage, and instead of the usual recovery mode thing on screen what comes up with this phone is the letters usb and battery levels. any ideas on how to restore?

    It doen't seem to be jailbroken i thought that it was because of what it did but even jailbroken phones go into dfu right? when the phone is on and i connect the usb cable it gives me "usb config" which is really weird it has a couple of options like mass storage, java storage. pictbridge. and another option which i think its something like mtp storage.it behaves as if it was just any other mass storage device. i will ask her tomorrow if it has been jailbroken. is there a utility that would restore it if it was jailbroken since itunes doesnt seem to recognize it at all.
    Thank you for your help.

  • HT1947 Remote app under iOS 7 does not rotate to landscape mode

    I am using the remote app to control iTunes on my computer.  I have an iPad 2 with iOS 7.0.2.  The remote app only displays in portrait mode.  If I rotate the iPad the app stays in portrait mode.  Anyone know how to fix this.

    Thanks so very much. That was exactly what I needed to know. May God Bless you for your helping heart.

  • HT1349 display well not go on landscape mode

      well not go on to landscape mode

    Do you have orientation lock on?
    iPhone User Guide (For iOS 5.1 Software)

Maybe you are looking for

  • Can't get e-mail to work using wireless router . . .

    Hi everyone, I'm trying to help my sister get her e-mail working. She is running a Macbook with 10.5. She is sharing an Internet connection with a PC, via a wireless router (a D-Link unit). The ethernet goes from the modem to the router, where it is

  • Clock output from TRITON into Logic

    Does anyone know how to use the sequencer clock in a KORG TRITON EXTREME to control logic? I have tried every possible combination from the two but can not seem to get this to work? Any help would be grateful Maxx G5 Duel 2 gig   Mac OS X (10.4.5)  

  • Export report using OBIEE 11g Schedule

    Dear all, I want to create a job , using this job i want export an analysis or dashboard. Thanks advance - @Zia Edited by: user2259460 on Feb 22, 2012 2:29 PM Edited by: user2259460 on Feb 22, 2012 2:31 PM

  • Two step Leave Approval Process

    Dear All Gurus, Please help me in this ESS issue. I am facing this issue in ESS Leave Request Application which I will explain with following scenarios. I have employees Ram and Sham Reporting to Ajay. 1.     Line Manager of Ram and sham is Ajay 2.  

  • When I zoom in to work in Captivate, it always shifts the view to a reset position. This is so annoying, is there a fix?

    When I'm zooming in to work on fine layout details in Cappy, it always resets the view and I have to scroll around again to get back to where I was. This is so frustrating and such a time sucker. Is there a solution or option to change this somewhere