HT1414 HELLO. MY NAME IS ELSAMI SANTOS FLORES. I UPDATED THE IOS7 TO MY IPAD LAST THURSDAY. EVERYTHING WENT FINE, BUT THE NEXT DAY WHEN I TURNED ON THE iPAD ASKED ME FOR THE PASSCODE NUMBER I ENTERED IT BUT DID NOT RECOGNIZE IT. THE MESSAGE GAVE ME WAS iP

GOOD AFTERNON PEOPLE OF APPLE SUPPORT COMMUNITIES.
LAST THURSDAY I UPDATED MY iPAD 2 WITH iOS7 SOFTWARE SYSTEM
EVERYTHING WENT OK. BUT I TURNED ON THE iPAD 2 A FEW AHOURS
LATER AND THE PASSCODE A GAVE IT IS NOT WORKING.
MY iPAD 2 IS DISABLE NOW. AND I NEED TO USE IT.
HOW CAN I UNLOCK MY iPAD?
PLEASE HELP ME. THANK YOU SO MUCH.
MAY GOD BLESS YOU.

I'm sorry but if you do not know the passcode a or if your ipad does not recognize it then the only way told get everything back to normal is to restore your ipad from the backup which you had made before updating to ios 7.
Thank you

Similar Messages

  • I installed photoshop cs6 in my new computer and when it asks me for my serial number I write it but it wont accept it

    I installed photoshop cs6 in my new computer and when it asks me for my serial number I write it but it wont accept it

    There are two steps when entering a serial number:
    When you enter it in the 24-digit field, you should see a green checkmark. If you see a red x, you may have mis-typed the number, as Ben pointed out, it could be for a suite instead of a standalone product.
    If it takes the number and installs, then activation is the next step. If it fails to activate, you may have exceeded your activations or the number might have been retired.
    In that case, contact Customer Care with proof of purchase.
    Contact Customer Care

  • HT201263 After I installed the iOS 7 software on my iPhone 5 it asked me for a passcode number. I do not have a passcode number. Now the device is disabled. I spent hours on the phone with Apple. following all steps to make a forced restore. It didn't wor

    I downloaded iOS 7 to my iPhone 5. On the process I must have put in an unknown passcode. Now the phone is disabled. I spent hours on the phone with Apple tech tech help. It told me to do a forced restore. I have not had success doing that. I tuned does not recognize the device   It is still disabled. HELP

    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps...
    Some users have reported that as many as 8 or 9 attempts were necassary before success.
    Take your time and pay particular attention to Steps 3 and 4...
    However...
    if the Device has been Modified... this will Not necessarily work.

  • I tried to delete and reinstall Lightroom 5 and have the same problems. I was on chat last night and got a reinstall. This Am The shortcut is broken and when I open directly it is asking me for my serial number. I did that last night.

    I successfully got Lightroom to open, it does not show my SD drive. I added the SD drive (folder) and it opened a few photos but then opened an old catalog. I tried again and got grey thumbnails with the correct Canon file numbers but no images. When I selected import, it opened an old catalog and began to convert it. I recently got the creative cloud subscription and I can open these photos there after pinning.  The problem is, I don't have time to figure out Photoshop before I need these photos.

    Thank you for responding. I can display my CR2 files in any program that
    will show them. I can drag or "pin' them to the Ps logo or button at on the
    task bar and they will be available in Photoshop. I purchased Lightroom
    before the Creative cloud was available. that's why I have a serial number.
    You've got me thinking I have two "dueling" programs of Lightroom. Could
    this be the problem? I have now deleted Lightroom and was going to
    reinstall. I will wait and figure out the reinstall from the Creative
    Cloud. thank you again.

  • I have imac os x...but today when i turn on it has ask me for my password as usual...i submit but won't start cause go back to the same question n i know that my password is correct...what can i do?

    please could somebody help with my imac OS X...cause this morning when i woke up i tryed to open but it won't start ask ,me for my password....like everytime i open but this time when i submit the password it won't star,just go back to the he same questiont....n i know that the password is correct.

    yes it is...i know have the master hint password...but honestly the master i can't remember.

  • My Ipad is disabled because it is asking me for a passcode which I never put in.

    My ipad is asking me for a passcode. I never put one in so it is disabled. My niece was playing on my ipad and may have put one in, but she doesn't remember. How do I get it off?

    If you mean you mean you need to change the iCloud ID, you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iDevice, then sign back in with the ID you wish to use.  When you do this you may find that the password for your old ID isn't accepted.  If this should happen, and if your old ID is an earlier version of your current ID, you need to temporarily recreate your old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID.  Click edit next to the primary email account, change it back to your old email address and save the change.  Then edit the name of the account to change it back to your old email address.  You can now use your current password to turn off Find My iDevice on your device, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll.  When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud).  Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was.  Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

  • Lightroom CC It keeps asking me for a serial number

    I dl lightroom through the CC on my mac. I pay for the photography offer (Lr and Ps for 12€/month) but when I open Lightroom It keeps asking me for a serial number. I checked, I pay every month, no pb with my credit card...

    See if any of this helps:
    http://helpx.adobe.com/creative-cloud/kb/ccm-prompt-serial-number.html

  • HT1222 I am trying to install update 7.1.1 and it is asking me for a passcode what is that? It is rejecting my Apple ID

    I am trying to install iOS 7.1.1 but it keep asking me for a passcode what is that? It is not accepting my Apple ID

    Hey, try your lockscreen passcode , that's what it should be asking for.

  • You did not select all the docs belonging to the cross-co code transact Message no. F5876

    Hello All,
    When Cross company document is reversed with FBU8, Only one (1) leg is reversed and another (2) is not.
    For internal audit purpose, when any document is reversed, User should attach some proofs and then he should reverse it.
    When I tried to reverse only (2) leg through FBU8, I am getting this error – “You did not select all the docs belonging to the cross-co code transact Message no. F5876”.
    Pls give me some inputs how to reverse (2) leg.
    Thanks

    Hello Kalim - I am getting error message. We can not make it to warning message, though we have option in OBA5.
    Any other alternatives?
    Thanks

  • Hi, please help me , i get notification about a new update for my iPad when I do the instal for the new version it is asking me for a passcode but which passcode may I have to enter? Because when I enter my gmail passcode it is call me that my pass fail

    Hi, please help me , i get notification about a new update for my iPad when I do the instal for the new version it is asking me for a passcode but which passcode may I have to enter? Because when I enter my gmail passcode it is call me that my passcode is failed

    The passcode you need to enter is the passcode you set on your device. It is the passcode that you enter when you turn on your iPad or awaken it from sleep after and Auto lock.
    If you do not know or remember your password and did not store it somewhere then you will have to restore your device.
    http://support.apple.com/kb/HT1212

  • HT4061 Hi, I did an IOS update last week and when the ipad rebooted it is asking me for a passcode ... i have never entered a passcode originally so dont know what passcode to input to open my ipad... it just locks me out... help what do i do ??

    I need help :-(
    Did an IOS update last week and after the Ipad rebooted it said slide to unlock then asked for a passcode to be entered..... I have never set a passcode ever ??
    What number do I enter to unlock the Ipad ... have tried the usual 0000 and 9999 etc but just locks me out .... HELP  !!!
    Or is there a way to go back to factory settings ?? (Without losing my Apple ID etc)
    Thanks

    If this was your first update to iOS 7 then you were asked to CREATE a passcode. Also there would have been a small Skip button to avoid creating the passcode. If, when you encountered that request you went ahead and entered a passcode number then you must use that number to unlock your device. Once the device is unlocked you can change or delete the passcode using the Settings app.
    To completely remove the passcode lock you need to connect your iPad to the computer you normally sync with and restore the iPad. This will erase all data on the iPad so be sure your info, photos, etc. are backed up first.

  • HT1212 I just updated my Ipad 2 to IOS7, now it is asking me for a passcode. I never set a passcode on my Ipad, so how can I enter a passcode. I tried using the OIS7 passcode I use on my Iphone  and it did not work and now my Ipad is disabled

    I just updated my Ipad 2 to IOS 7, now it is asking me for a passcode. I never set a passcode on my Ipad, so how can I enter a passcode. Earlier today I upgraded my Iphone 5 to IOS 7 and it asked me to set a passcode, which now works fine on my Phone. I  tried using the OIS7 passcode I use on my Iphone 5 and it did not work and now my Ipad is disabled. Both devices are on icloud and share the same apple id. The Ipad screen says slide to set up but then there is a prompt for passcode, not for setting up passcode

    I called Apple Support and a supervisor helped resolve this for me on my iPad. I suggest calling them for help as this is obviously an issue with the iOS 7 update - she helped me without charge. I could be missing something in my upcoming description, so do not take this as complete - call them.
    I had to update iTunes on my Mac Air to the latest version, and I had an iCloud backup from the day I updated to iOS7. Have iTunes open but do NOT connect your iPad yet. Shut down the iPad. Then press/hold the Home key on the iPad while you connect the USB from the iPad to the computer (an image of the USB cable appeared on the iPad). Follow the prompts in iTunes to restore and then backup using iCloud. When the iPad rebooted again to do the backup install, I got the same pass code issue and iTunes would not recognize the iPad without entering a pass code. I disconnected the iPad, turned it off, pressed the Home key while connecting the USB cable. When I did the restore and backup from iCloud the second time, it worked without the pass code issue occurring.

  • HT1222 My phone is telling me about a Software Update but for the first time it is asking me for a passcode, I have never set up a passcode and do not know how to get around this to do the upgrade?

    My phone is telling me about a Software Update 7.1.1 but for the first time it is asking me for a passcode, I have never set up a passcode and do not know how to get around this to do the upgrade?

    See if this helps:
    iOS: Forgotten passcode or device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212

  • Please help  I am suddenly getting the following on my calendar  The server did not recognize your user name or password for account "..." Make sure you enter them correctly.  I depend on it for work

    Please help  I am suddenly getting the following from my calendar  The server did not recognize your user name or password for account “...” Make sure you enter them correctly.I have even tried changing the password and no luck.  I depend on it syncing with mobile me and my phone and I need it for work.

    I have been having the same issue but I think I fixed my problem.  In iCal, click iCal, Preferences, Accounts and retype your password.  That seems to have done the trick for me as far as I can tell.

  • I already have installed Ai, Lr an Id, but when I try to use it the software says that the Proof period is over, and then ask me for a Serial Number of 6 digits. otherwise It offers to me to purchase a new subscription. BUT I ALREADY PAY 2 MONTH of THIS P

    I already have installed Ai, Lr an Id, but when I try to use it the software says that the Proof period is over, and then ask me for a Serial Number of 6 digits.
    otherwise It offers to me to purchase a new subscription. BUT I ALREADY PAY 2 MONTH of THIS PLAN!!!!!! 
    I want to USE the products….CAN YOU HELP ME????
    regards,
    Leticia
    There aren´t an email, a phone number, a chat or a place to find helpful. I live in Argentina, where I can find a solve to my problem?

    Does your Cloud subscription properly show on your account page?
    If you have more than one email, are you sure you are using the correct Adobe ID?
    https://www.adobe.com/account.html for subscriptions on your Adobe page
    If yes
    Some general information for a Cloud subscription
    Cloud programs do not use serial numbers... you log in to your paid Cloud account to download & install & activate... you MAY need to log out of the Cloud and restart your computer and log back in to the Cloud for things to work
    Log out of your Cloud account... Restart your computer... Log in to your paid Cloud account
    -Sign in help http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
    -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
    -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
    -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html
    -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp
    -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html
    If no
    This is an open forum, not Adobe support... you need Adobe staff to help
    Adobe contact information - http://helpx.adobe.com/contact.html
    -Select your product and what you need help with
    -Click on the blue box "Still need help? Contact us"
    If you really want to cancel, You need Adobe support to cancel a subscription
    -start here https://forums.adobe.com/thread/1703848
    -or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html
    --and two links which may provide more details, if the above links don't help you
    -http://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html
    -http://helpx.adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html

Maybe you are looking for

  • My iPod froze trying to download ios 6.0. Help please?

    I tried to download the ios 6.0 software to my iPod via USB and got an error. Now my screen has the Apple icon and a USB cord and will not respond.Plus I can't get iTunes or my computer to recognize my iPod now. Please help.

  • Web form tester. don't run the form.

    Dear all, i am using oracle 8i and forms 6i. i am trying to run the web form tester but it give error. i gave the forllowing parameters: form : D:\Accano\logonscreen.fmx Userid : mis other parameters : useSDI= yes ( what is this?) Look and Feel: Gene

  • Location of 9.2.0.1.0a patch

    The BI Beans 9.0.3 pre-release is available at http://otn.oracle.com/software/products/bib/ The 9.2.0.1.0a patch is available at http://download.oracle.com/otn/java/olap/pe2499827.zip PM Team

  • Managing Dependancies

    This is an inquiry regarding MS Project functionality for dependency management, specifically, the "Manage Dependencies" option within the Insert menu that allows the user to add and define a dependency across and between projects. When this option i

  • Reporting security bugs

    Hi, i've found a security problem in a solaris 9 pkg where i should send information about it? Is a mail to security-alert at sun.com enough? There is an ssl web form to use? Should i only explain the problem or can i submit my analisys too? Thank yo