HT1414 hey i tried restoring my ipod touch but my screen is still went blank

My ipod has a white screen how do you fix it

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Similar Messages

  • I forgot my passcode and tried restoring my ipod touch, but it's not working. What should I do?

    I forgot my passcode and tried restoring my ipod touch, but it's not working. What should I do?

    Did you place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                          
    If recovery mode does not work try DFU mode.                         
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings         
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • Ok i recently tried to restore my ipod touch but when i plug it in it says your ipod needs to be restored. but when i try to restore it downloads the software and while its downloading it pops up a message saying your ipod needs to be restored. when the d

    Ok i recently tried to restore my ipod touch but when i plug it in it says your ipod needs to be restored. but when i try to restore it downloads the software and while its downloading it pops up a message saying your ipod needs to be restored. when the download is finished it doesnt restore or do anything and it stays stuck on the plug your ipod into itunes screen somebody please help me.

    Maybe:
    Restore loop (being prompted to restore again after a restore successfully completes)
    Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
    Next try placing in DFU mode and then restoring.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    Then try restoring on another computer.
    Last, make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar

  • I tried to restore my ipod touch but it says it could not be and than an unknown error occured (3194) please help me!!

    I tried to restore my ipod touch but it says it could not be and than an unknown error occured (3194) please help me!!

    Fix Error 3194 from iTunes during iPhone restore
    iPhone Error 3194 - How to Fix iTunes Error 3194?
    iTunes: Specific update-and-restore error messages and advanced troubleshooting

  • HT4972 I restore my Ipod touch but there is not any available upgrade for IOS and less IOS5

    I need a help: I restore my Ipod touch but there is not any available upgrade for IOS and less IOS5

    Which ipod do you have?
    ios 4.2.1 is the latest available for the 2nd gen.
    Identifying iPod models

  • I have to restore my ipod touch, but where will my music be that hasnt sync'd yet that i purchased on my ipod?

    I have to restore my ipod touch, but where will my music be that i downloaded from my ipod? It hasnt sync'd to my computer yet because my ipod isnt 'recognized' by my computer, therefor I need to Restore it. But I dont want to restore it if I'm going to lose those songs...

    I lost my music once because a faulty hard disk, I got in touch with iTunes support and got back most of it, except those that where pulled off the iTunes Store, but I am not sure what are the current policies. That is why I advice you to take it to the Apple Store, if it is a faulty unit you might get it replaced for free, who knows.

  • HT1414 I'm trying to restore my ipod touch but the restore box doesn't come up on itunes. Nothing appears for me to click restore. Please help

    My Ipod touch is disabled but I know how to put it in dfu mode(I think that's correct)...but when I log into itunes the restore box does not appear.
    What am I doing wrong? How do I restore my ipod touch on itunes when the restore box does not come up?

    Try Recovery Mode and restore via iTunes.
    iOS: Wrong passcode results in red disabled screen
    If not successful, try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    Next would be to try on another computer  to help determine if you have an iPod or computer problem.

  • Im trying to restore my ipod touch but it says i need a disc?

    I tryed to update my ipod however there was a problem and now says i need to restore my ipod touch 4g, however when i do try to restore it my laptop says it needs the disc the ipod came with however there was no disc? Ive tried searching for software but nothing comes up, what should i do?

    If you are still having prolesm try here:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
    Looks especially at the driver sections.

  • HT1414 how i can restore my ipod touch

    hi. how i can restore my ipod touch?

    Are you sure you have a 3rd generation Touch?
    If it has Model No. A1288 etched into the back casing, then it's 2nd generation and cannot go beyond iOS 4.2.1
    You can check here; http://support.apple.com/kb/HT1353

  • Tried to update Ipod touch but it froze

    I just tried to install the update on my Ipod Touch but it froze with the apple on the screen with a little loading bar on the bottom that was blank. How do I fix this??

    Put the iPod into DFU mode and restore it. It seems as though the iPod is experiencing an issue with the software that is preventing it from booting up properly. Putting the iPod into DFU mode allows both the software and firmware to be replaced as well as removing the content which differs from a regular restore or update in iTunes where the software is removed but the firmware is only modified.
    To put your iPod Touch into DFU mode:
    1. Make sure the iPod is connected to a computer with iTunes on it.
    2. Hold the sleep/wake button and the home button at the same time for 8 seconds.
    3. Let go of the sleep/wake button and continue holding the home button.
    4. If successful, the iPod display will remain black and iTunes will show a dialog box that it has detected an iPod in recovery mode.
    5. Click OK, then click Restore.
    After that the iPod should be up and running and you can sync your data back.
    I hope this helps!

  • I tryed reseting my ipod touch but the apple logo wont go away no matter what i do and computer wont recognise it

    I tried to reset my ipod touch but the apple logo wont go away and isnt responding to my computer HELP!!

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • I tried to update my ipod touch but my itunes froze and i had to restart my computer and now it says i have to restore my ipod touch but it always freezes halfway what do i do?

    my itunes said to update my itunes and ipod touch and when i tried my itunes froze and i had to reset my computer and now my ipod has to restore and when it does it freezes what ddo i do?

    This seems to fit yu symptom:
    Hang during restore process: Following Troubleshooting security software will frequently resolve this error. This error can be caused by the default packet size being set incorrectly. There may be third-party software installed that modifies the default packet size in Windows by inserting a TcpWindowSize or MaxGlobalTcpWindowSize entry into the Registry. Contact the manufacturer of the software that installed the packet-size modification for assistance in adjusting this TcpWindowSize values. Typically the default packet size is modified by 3G cellular network card software, ISP communication software, or Internet speed download optimization software. There are legitimate reasons to change the TCP/IP packet size and not use the Windows default settings (for example, network traffic optimization, home/broadband optimization, enterprise app optimization such as database apps, Exchange, and more). Deleting the "TcpWindowSize" or "GlobalMaxTcpWindowSize" entries in Windows Registry could affect the system's performance with other apps or on their network connections. Deleting the customized TCP/IP settings may require the reinstallation of any third-party applications that had modified the TCP/IP settings from the Windows default settings.
    There are two ways to resolve this:
    You can follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) , or follow the steps below to manually find and remove TcpWindowSize and MaxGlobalTcpWindowSize entries from the Registry.
    For Windows XP, Windows Vista, Windows 7: Go to the C:\\Windows folder and launch regedit.
    Go to Edit > Find.
    Search for "TcpWindowSize" entries. There are typically multiple entries of TcpWindowSize/GlobalMaxTcpWindowSize spread throughout the entire Registry. If "TcpWindowSize" exists, one or more third-party applications have changed the user's default Windows settings for TCP/IP.
    Go to File and select Export. This step will export a copy of the Registry that can be used as a backup of the original settings.
    Delete the "TcpWindowSize" entry.
    Search for the next "TcpWindowSize" entry and delete each one until the Registry no longer has any "TcpWindowSize" entries.
    Close Regedit, restart the PC, and test.
    If you are uncertain as to why these registry entries exist and the PC is a business computer, contact your network administrator and determine what values TCP/IP can be set in their Windows Registry setting so that the PC can update or restore an iOS device rather than deleting the "TcpWindowSize" entry.
    If editing the registry does not resolve the issue, restoring on a different computer that did not install the communication software is the step most likely to resolve this issue.
    Above from:
    http://support.apple.com/kb/TS3694

  • Trying restoring my ipod touch 4 g , detected by itunes in restore mode,

    hi everybody;
    my ipod touch cannot start; after connectiong to itunes , it is  detected  in restore mode and itunes says that i must restore the ipod for continuing using it;
    so accepted and lanched the restore procedure.
    after finishing downloading the version iPod4,1_6.1.6_10B500_Restore; my ipod restarts and stuck on Apple with progressing bar below;
    itunes says that it is restoring the firmware of my ipod but nothing happening, still my ipod stuck on the apple with the progressing bar not working ( 3 hours later );
    on itunes we can see " wainting on ipod "
    Please if anyone of you can help me, i'ell be very gratefull; this ipod is the only thing that calms my autist daughter.
    thanks in advance.
    liliebel.

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable                                                       
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • HT201210 I  just tryed to restore my ipod touch but it didnt work my ipod touch had turned back on so what do i so next

    my ipod dosn't restore when i tryed

    Any error message?
    Otherwise:
    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • I restore my ipod touch and the apple logo stills there like loading

    can someone give me an advise??

    First try restoring the iPod from backup.
    Next try restoring the iPod to factory defaults/new iPod.

Maybe you are looking for

  • I didn't safely eject my external hard-drive and now my files are not showing up on my other computer?

    I didn't safely eject my external hard-drive as my imac was in sleep mode and I thought it was shut-down. Now I have turned up to uni and plugged my hard-drive into the uni computers (apple) and the word document I was working on last night (before m

  • Upload .xls file in internal table in web dynpro abap

    Hi everyone, i want to upload .xls(excel file) into an internal table.....after lots of attempts i came to a conclusion that web dynpro only supports .CSV(another format of excel file) to be uploaded into internal table....i tried many ways....is the

  • How to open the files from the system

    Hai to all Here I am doing a project where I have to put backup word files on the browser . I have created an applet with browse , attach and done (Buttons) . By clicking browse I have to get the open dialog box so that i can give the path easily . A

  • Subsequent settlement with different volumes (scale and rebate)

    Hi A nice question for you all. In subsequent settlement I want to do the following: Interval scales: >$100.000 -> 1% rebate >$450.000 -> 2% rebate >$600.000 -> 3% rebate (this is easy) When I want to determine the business volume I want to different

  • Interactive forms, WD4A, Firefox

    Hi, I have problems with displaying my interactive form in firefox. In IE everything is OK, but in firefox, there is only blank space instead of interactive form.I have ZCI layout in my form layout type. Where is problem? Thanks for any reply.