HT1414 hi ive got an iphone and i wanted to restore it and and it got 3 quartes done then it comes up with error -1 and when i tried to turn it on all it would come up with is connect to itunes and ive tried to restore it about 5 times now but nothing is
hey my iphone 4 gsm is now stuck on the image on connecting to itunes i tried restoring and after 3/4 it would stop and a message would come up saying error -1 and now i cant even turn it on ive done it 5 times now and very fustrated
if anyone else has this problem what u do it as soon as it gets stuck to where it normal stops quickly take out ur sim card
and it should work
Similar Messages
-
I restored my iphone but now it will not power on fully. The Itunes plugin appears. I plug it in and restore as requested but the phone never restarts like it says it will. I have done this several times now but nothing. Suggestions?
Sounds like time to take it back to Apple for repair.
Allan -
my iphone is off when i try to turn it on its gives me a picture of usb connected to itunes ....but when i connect my phone to itunes on my computer t says to restore my phone so i tried restoring it but it wont restore.so what do you think i should do ?
I had this on my iphone 4s - took it into the apple store. They couldn't fix it either and ended up giving me a replacement phone
-
can someone tell me how to unlock ipod touch 4th gen. my son forgot password and put wrong one in more than he should have now it says ipod disabled connect to itunes and has a picture of a roll of toilet paper with a frowny face and hands holding onto another piece of toilet paper almost ripped off holding onto the hands of the roll
You are very welcome...few users realize that the recovery mode restore may need a few tries to get it to work...so often just add the caveat. There is a difference between parents and their children who have lived with technology all their lives
-
My Iphone 4 shuted down after tried to instul ios 7.0. I 'm only seeing the sing of iTune and USB plug right on the phon's screen
I really need help because that's only phone i got.Just back from Genius Bar and two other people at my table had the same problem. Their 4Ss aren't charging either. One of them had a fried board according to the tech. At least my HW checked out OK. It just won't charge.
The tech tried to tell me that it was because my connector was corroded, which I told him was kind of a weak argument since evidence points to that the update has something to do with it.
They're seeing a lot of these and it looks like they already have a script.
Luckily I had enough juice left to recycle it for like $180, so I picked up a 5S with a new 2 year.
It looked to me like this is going to blow up pretty big. Like class action lawsuit big.
If you have an iPhone 4 or 4S, and you haven't updated it to iOS 7, don't for now. See if a patch comes out that doesn't brick your phone. Or get an induction charger maybe? Don't just update and expect absolutely no problems because too many people are having problems right now. -
My iphone wont sync or perform updates while connected to itunes and also my phone suddenly stopped mms messaging if anyone can help would be great
Basic troubleshooting from the User's Guide is reset, restart, restore. Has any of this been tried?
-
my iphone 4 says activation required and then connect to itunes and when i try to connect it wont what do i do (i cant use it at all) :'(
i got it from O2... and it dosent do anything when i plug it into my laptop it dosent come up at all or connect to itunes
-
When I was updating my ipod touch 4g 8g 4.3.3 the USB came out and now it just shows connect to itunes and when i try to update it comes with error 6. I do all of the help things and nothing happoned
First see if placing the iPod in Recovery Mode will allow a restore.
Next try DFU mode and restore.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
If not successful then time for an appointment at the Genius Bar of an Apple store. You are not alone with this problem. -
Hi,
For no apparent reason my phone stopped working...so I did a reset and got the message 'Restore Needed'. I connected to iTunes and got this message: 'iTunes could not connect to the iPhone because it is locked with a passcode. You must enter your passcode on your iPhone before it can be used with iTunes'.
The problem is, I can't enter my passcode because I'm not given that option on the iPhone. All I seem to be able to do is make an emergency call.
It's been working fine otherwise. Any suggestions?
This is the SECOND replacement iPhone I've had this week and I'm getting a bit fed up.
Thanks in advance for any help,Are you referring to the 4 digit passcode needed to enter the phone and use it's features?
If so reboot your iPhone and enter the passcode to get it operational. Launch Image Capture on the Mac and connect the iPhone. Now you should be able to download the video files to wherever you want on your hard drive.
OT -
I updated my iPhone 3G today and after the update it said on iTunes that my sim was not compatible and my iPhone screen went on to slide for emergency/connect to itunes. Ive tried restoring it but it hasnt worked. Please help!
Unless the iPhone was purchased as unlocked very recently directly from an Apple Store (the only place in the US where unlocked iPhones are sold, and then only since June), which from the symptoms I doubt is the case, then it was locked to AT&T and jailbroken to make it work with an Irish cell carrier. Updating the operating system has now relocked the iPhone back to AT&T.
Only the cell carrier can institute an official unlock, one which will hold across updates of the operating system, and AT&T will not do so for any reason. All we can advise here is that you return the iPhone to your uncle and purchase an iPhone there in Ireland.
Regards. -
Hi all. I can't seem to update my itunes and my Iphone 4,do I need to update my operating system?
Hi all. I can't seem to update my itunes and my Iphone 4,do I need to update my operating system?
Jaiden106 wrote:
I'm running Mac OS X version 10.5.8
The first step in Upgrading... is to Snow Leopard = OS X 10.6.x
It is Not available as a download... It is a Paid Upgrade.
Do this first...
Check that your Mac meets the System Requirements for Snow Leopard...
Snow Leopard Tech Specs
http://support.apple.com/kb/SP575
If so... Purchase a Snow Leopard Install Disc...
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Other countries...
http://support.apple.com/kb/HE57
After the Successful Install, run Software Update to get the latest updates for Snow Leopard and iTunes.
Be sure to make a Backup of your Current System Before Upgrading...
NEXT:
Check that your Mac meets the System requirements for Lion...
Lion Tech Specs > http://support.apple.com/kb/SP629
If so Contact Apple in your Country to Purchase a Lion Download code...
http://support.apple.com/kb/HE57
In the US...
1-800-MY-APPLE or 1-800-676-2775
Be sure to make a Backup of your Current System Before Upgrading...
Also... Check here for compatibility of 3rd party Software you may be using...
http://roaringapps.com/apps:table
You should also consider more RAM... Lion is a hungry beast...
It is important to get the Correct and Matching RAM
See Here > OWC RAM > http://www.macsales.com
The above site also has videos on how to Install RAM should you need it.. -
I recently updated my iphone 5 to IOS 8.0.2 and now it wont turn on it just says to connect to itunes and when i do the only option it gives me is to restore iphone because it is in "recovery mode". It says it will delete all my media but i didn't do a back up and i don't want to lose my photos, what should i do? (I never used iCloud to back them up either).
If it's in recovery mode, the data is already gone. Why did you never back up your important data?
-
i was trying to update my iphone and it downloaded the software but when it went to install it it turned off and wont turn back on and says i need to connect to itunes and ive tried but itunes doesnt recognize its there
Connect in recovery mode and restore, as described in this article:
If you can't update or restore your iOS device -
ýesterday my iphone 5c screen suddendly shows connect to itune and i try to restore it using itune but halfway i got a message error occured (14). please help me in solving this problem.
what did you learn when you search the internet for iPhone error 14?
-
I have a iphone 4 and it will not come out of the connect to iphone mode. I have connected to itunes and it will go about 3/4 of the way and say the phone cannot be updated. It was installing and update when this happened. can anyone help?
Turn your phone off and connect your cable to the computer, but not the device just yet. Start up iTunes. Now, hold down the home button on your phone and plug it in to the cable - don't let go of the button until iTunes tells you it's detected a phone in recovery mode. Now you should be able to restore to factory settings.
Maybe you are looking for
-
IPlanet authentication over SSL
I've written a when_compare_replace plugin for out 9.0.2.0 OID server to perform user authentication against our iPlanet LDAP server for portal users. Authentication works great as is shown in the plugin souce below but it is being done in the clear,
-
How can I remove pictures from my iphone that were imported from another iphone
How can I delete photos from my current iphone that were imported from my previous iphone? They were also synced to mycomputer through itunes and not deletted at that time.
-
ABAP code in start routine (delete no in)
In my start routine, I would like to delete some data package whose employee id is not in the selection list. but there are some ABAP grammer error in the where condition. Can somebody help this? I tried to read the document for 'WHERE - IN seltab',
-
Error reading jms message from MQ-queue
Hi, To be able to use async-sync bridge in JMS adapter, we recently patched XI 3.0 from SP 15 to SP21. But the jms sender adapter has problem reading the message from the MQ-queue, see detail of error-message at the end of this message. I did change
-
Trying to run Accutest 1000 manufactured by Physical Testing Equipment with Labview
We have an Accutest 1000 which is manufactured by Physical Testing Equipment and we would like to run the equipment and gather data thru Labview. Does Labview support this type of activity? Is there a 3rd party that would contract to set-up this conf