HT1414 how do you get i cloud to work

how to you make i cload work

Maybe instead of being so vague you could try asking a specific question... or better yet, search for the issue that you are trying to resolve.
There is a lot of information about iCloud, Apple writes a lot of helpful articles and you can always read the User's Guide to answer many if not all of your questions.

Similar Messages

  • How do you get the radio to work ?? - says no radio signal but headphones are plugged in ??

    How do you get the radio to work?  Is another app or download required?  Its a new Ipod nano - 8G, box doesn't say anything about "generation" ?? Appreciate any help
    cr8tivsolutions

    ok, I see now the plug has to be pushed in really tight until the white is flush with the nano

  • How do you get gif's to work on a mac

    how do you get gif's to work on a mac

    Here yah go.
    Install the software at the link below
    This will allow you to view animated gifs in preview
    click on the gif to select it and then press the spacebar
    http://sourceforge.net/projects/animgifqlgen/

  • For OS X 10.3.9 Panther how do you get Flash 9 to work after downloading it?...

    For OS X 10.3.9 Panther how do you get Flash 9 to work after downloading Flash 9 ?... for the link at
    http://www.universalhub.com/node/24494
    "To watch this video you need Flash 9
    You have an old version of Flash. Fortunately we can upgrade
    your computer to Flash 9 without without any hassle. Just click on the
    upgrade button - you don't even need to leave the page!
    [ Upgrade now! ]
    After Flash 9 is downloaded, you'll need to restart your browser.
    [ Download and install manually. ]"

    Hello Again Don,
    It appears you have been struggling with this issue since November of 2008.
    Have you considered upgrading to a newer version of OS X instead?
    11/20/08 What workarounds are there for OS X 10.3.9 users on websites with flash
    4/12/09 How do you get the current Flash to work with OS X 10.3.9 ?...
    5/25/09 After downloading Flash 9, how do you get it to work with OS X 10.3.9 ?...
    8/9/09 How can OS X 10.3.9 users view Flash on websites?...
    8/9/09 How do you get Flash 9 to work with OS X 10.3.9 ?...
    ali b

  • HT1414 how do i get my ipod to work when all i get is a pic of a usb cable and an itunes logo

    how do i get my ipod to work when all i get is a pic of a usb cable and an itunes logo

    Connect the iPod to your computer and restore via iTunes.
    iTunes 10 for Windows: Update and restore software on iPod, iPhone, or iPad

  • HT1414 How do you get an iphone 5 back to factory settings if you do not have the password?

    How do you restore an iphone5 to factory settings if you do not know the phone password?

    http://support.apple.com/kb/HT1212

  • How do you get face time to work with shared email adress

    I have 2 computers sharing the same email address. I recieved for xmas a new i touch with face time. I can connect with the thrid computer not using the same email address as mine. How do I get the other 2 to accept the incoming calls?

    You have to add a unique calling email addres to Settings>Facetime and delete the common email address.  Yu need to do the same thing for Messages.

  • How can you get a java program working on a cell phone?

    I was thinking of making some stuff for cell phones so i was wondering how you get a normal java program to work on cells.

    its all j2me - midlet package....Huh? The jsr-118 MID profile alone has 11 packages, one of which is javax.microedition.midlet. Notj2me - midlet.
    works best on nokia phones.Sez who? You seem to be confusing Java ME with Symbian C.
    you can use net beans midlet packge add-on.Only it's called the NetBeans Mobiliity Pack.
    Its easy to use and has lots of tutorials.Ditto for the Wireless toolkit for CLDC.
    just search on google.Yes, but with which keywords?
    @OP:
    NetBeans mobility pack comes with a short tutorial and several samples, you also need to download the latest WTK as the ver. 2.2 which comes bundled with NetBeans is just too buggy to work with. Then there are the manufacturer-specific SDKs from Nokia, Motorola, Sony Ericsson and (maybe) others.
    If and when you get started in Java ME aka j2me, it will be appropriate to post any questions you might have on the mobility forums, not here.
    Google "j2me tutorial" for many good hits.
    luck, db

  • How do you get Oracle 8i to work with j2sdkee 1.3 B

    I had the j2sdkee1.2.1 working with Oracle 8i and I had the following line in the ~conifg/default.properties files
    Here's what worked:
    jdbcDatasources=jdbc/EstoreDB|jdbc:oracle:thin:@localhost:1521:ORCL|jdbc/InventoryDB|jdbc:oracle:thin:@localhost:1521:ORCL|jdbc/jcampDB|jdbc:oracle:thin:@localhost:1521:ORCL
    In the j2sdkee1.3 beta 2, the resource configuration file format seem to have changed and I am not sure how to get oracle to work. I have tried modifying the new format but it does not seem to work. Can anyone tell me where set drivers for Oracle 8i or any place I can look to figure how to.
    jdbcDataSource.5.name=jdbc/Oracle
    jdbcDataSource.5.url=jdbc:oracle:thin:rmi:??;create=true
    jdbcDriver.0.name=COM.cloudscape.core.RmiJdbcDriver
    jdbcXADataSource.0.name=jdbc/XACloudscape
    jdbcXADataSource.0.classname=COM.cloudscape.core.RemoteXaDataSource
    jdbcXADataSource.0.dbpassword=
    jdbcXADataSource.0.dbuser=
    jdbcXADataSource.0.prop.createDatabase=create
    jdbcXADataSource.0.prop.databaseName=CloudscapeDB
    ==============
    Any pointers on how to get Oracle 8i to work with j2sdkee1.3 b2 will be appreciated. thanks.
    --pvt

    You are right. It seems the format has changed.
    However, now there is and admin tool that comes with J2EE SDK 1.3 Now you don't have to touch the config file by hand.
    You can use this tool to get the configuration done.
    To add JDBC driver the command is...
    j2eeadmin -addJdbcDriver oracle.jdbc.driver.OracleDriver
    and to add a data source the command is...
    j2eeadmin -addJdbcDatasource jdbc/Oracle jdbc:oracle:thin@rtc:1521:acct
    Read details about this and other configuration you can do using this toll in the file %J2EE_HOME%/doc/release/ConfigGuide.html

  • HT4623 How do you get your phone to work again after the iTunes update?

    I did an update on my iPhone from iTunes and now the I only have one screen on my phone that has a picture of the iTunes app and the USB cord.  I have plugged and unplugged my phone.  I have tried to turn it off.  I have turned off my computer, but I only get the same screen.  What can I do to get my phone to work properly again?

    That app should have a video on how to do that.  IF not look at their support site.

  • How do you get your volume to work on video?

    Please help! I can't get my volume to work on video or listening to a video but it works every where else?

    Did you set it up correclty? Have a look - this is for iMessage.
    http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
    for FaceTime
    http://www.trickyways.com/2011/04/set-up-facetime-on-the-ipad-2/

  • How do you get distributed destinations to work ?

              Hi all,
              I'm trying to getting to work Distributed JMS Destinations. But
              still without success. This is the sitation:
              Node1---->JMS Server1------>Queue1 [Distributed destination1]
              Node2---->JMS Server2------>Queue2 [Distributed destination1]
              I have a cluster with 2 Nodes.
              I have created 2 JMS Servers each one targetted on one Node.
              Then I have created 2 Queues and added them to a Distributed Destination as member.
              Now I start the QueueSender (pointing to the Distributed Destination's JNDI)
              I start 2 QueueReceivers (pointing to the JNDI of the 2 Queues).
              The problem is that when one of the two nodes, let's say Node1, fails
              messages aren't dispatched to the JMS Server2.
              So I wonder: Is it possible that if one of the 2 JMS Server fails
              the message is redirected to the other JMS Server ?
              Thanks a lot
              Francesco
              

    Receivers only load-balance once - when
              they are first created. The JMS Performance
              Guide explores the implications of this.
              Keep in mind that the distributed destination
              feature was optimized for the case where
              receivers (generally MDBs) run on the same
              servers as the distributed destination
              instances, which simply load balances each
              receiver to its local destination instance.
              Otherwise, if the receivers
              are not co-located with distributed destination
              instances, load-balancing
              configuration requires special care to prevent
              physical destinations from not getting served
              by receivers.
              One solution for the latter problem, as you
              already wrote below, is to receive directly from the
              physical destinations - which removes the
              load balancing decision all-together.
              Francesco wrote:
              > Hi,
              > thanks a lot for your clean answers.
              > Ps has anybody got an answer about my last question (That is, should I lookup
              > the JNDI
              > of the single Queue or of the Distributed Destination in order to get distributed
              > destination to work ?)
              > Thanks a lot
              > Francesco
              >
              > Tom Barnes <[email protected].bea.com>
              > wrote:
              >
              >>It is normal for a sender to get an exception
              >>when its connection's host server goes down.
              >>The client connection's host server does
              >>not change for the life of the connection,
              >>and does not automatically fail-over.
              >>Even when the client's connection host stays up
              >>but the JMSServer hosting the current
              >>distributed destination instance goes down, the sender
              >>may still get an exception. Such an exception
              >>can indicate that there is ambiguity as to
              >>whether or not the JMS server received the
              >>message from the send().
              >>
              >>The standard way to handle
              >>such exceptions is to re-establish the connection,
              >>session, and producer on the client (usually
              >>using the exact same code that initialized
              >>these resources to start with.)
              >>
              >>In addition, it is highly recommended
              >>for the client to register exception listeners
              >>on both the connection and on the WLSession.
              >>
              >>Tom
              >>
              >>Francesco wrote:
              >>
              >>
              >>>"Barry Myles" <[email protected]> wrote:
              >>>
              >>>
              >>>>Hi Francesco
              >>>>
              >>>>Try creating a connection factory that has Load balanced ticked and
              >>
              >>server
              >>
              >>>>affinity
              >>>>unticked
              >>>>
              >>>>now make sure that the distributed destinations load balancing property
              >>>>is set
              >>>>to Round Robin
              >>>>
              >>>>
              >>>>
              >>>>>I start 2 QueueReceivers (pointing to the JNDI of the 2 Queues).
              >>>>
              >>>>Also when the QueueRecievers are running do you see one consumer attached
              >>>>to each
              >>>>physical queue?
              >>>>
              >>>>HTH
              >>>>
              >>>>
              >>>>"Francesco" <[email protected]> wrote:
              >>>>
              >>>>
              >>>>>Hi all,
              >>>>>I'm trying to getting to work Distributed JMS Destinations. But
              >>>>>still without success. This is the sitation:
              >>>>>
              >>>>>Node1---->JMS Server1------>Queue1 [Distributed destination1]
              >>>>>Node2---->JMS Server2------>Queue2 [Distributed destination1]
              >>>>>
              >>>>>I have a cluster with 2 Nodes.
              >>>>>I have created 2 JMS Servers each one targetted on one Node.
              >>>>>Then I have created 2 Queues and added them to a Distributed Destination
              >>>>>as member.
              >>>>>
              >>>>>Now I start the QueueSender (pointing to the Distributed Destination's
              >>>>>JNDI)
              >>>>>I start 2 QueueReceivers (pointing to the JNDI of the 2 Queues).
              >>>>>
              >>>>>The problem is that when one of the two nodes, let's say Node1, fails
              >>>>>messages aren't dispatched to the JMS Server2.
              >>>>>
              >>>>>So I wonder: Is it possible that if one of the 2 JMS Server fails
              >>>>>the message is redirected to the other JMS Server ?
              >>>>>Thanks a lot
              >>>>>Francesco
              >>>>
              >>>Hi Barry,
              >>>I have tried to modify the connection factory as you said but
              >>>I'm still stuck. Basically when I shut down one of the two Nodes, the
              >>
              >>Sender
              >>
              >>>receives an exception "IllegalStateException: Producer is closed".
              >>>
              >>>Could you tell me if it's basically correct that :
              >>>
              >>>Sender----->looks up the Distributed Queue
              >>>Receivers---->look up the single Queues (which belong to the Distr.
              >>
              >>Queue)
              >>
              >>>Thanks again
              >>>Francesco
              >>
              >
              

  • HT1414 how do you get old apps to update under a new apple id?

    when I update apps I get "your apple id has been disabled, but I can buy new ones and my account shows good?????

    You purchased the old apps under a different Apple ID, therefore you must use that Apple ID to update them. If your account is disabled you need to fix that.
      Forgot your Apple ID, password or both?
    iTunes Store: Retrieving and changing passwords (Apple ID):
    http://support.apple.com/kb/HT1911 

  • HT1414 how do you get to purchase history on ipod/

    i cant get any apps on my ipod and i think it was because i tried getting this app but i tried canceling and now it just wont work

    See:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • HT1414 How do you get an iphone from recovery mode?

    My iphone 3gs shows itune logo and the usb connector  below it. I have tried to update but it is still the same way what must I do?

    Restore it in iTunes.

Maybe you are looking for

  • Calibrating my monitor wigh 10.2.8

    I have been trying to calibrate my monitor using my old coal-fired OS of 10.2.8. I go through the steps under the "Display" memu in the system profile. I get finished and save the profile under a new name. However I can not get the new profile to tak

  • Why wont iMovie open my project?

    This is extremely aggravating, iMovie suddenly wont open 2 of my projects. I was working on them for hours and finally got them how i wanted them to be, and when i go to open it later, it won't open! All that happens when I click on it is that it let

  • Every apps crashed, i can't use for a minute because every apps down, include The contacts

    Todas las aplicaciones se me cierran. Incluido la agenda de contactos. Este inconveniente lo tengo con el iPhone 4S. Intente haciendo una restauración con el iTunes pero me da el mismo error. Con el iPad 2 funciona de manera impecable.

  • How to access group content, or anything inside?

    Let's say I have this group: var myGroup = Group{      var someNumber:Number;         var stf = SwingTextField{              columns: 10,               text: "TextField",              editable: true      content:[           Text{                x: 10

  • How can I Filter AMF Data to CFC?

    How can I keep Flex from sending certian properties thru a remoteobject to a cfc function? I have a class that has a large XML variable that I don't want being sent to my cfc? How can I exclude it?