HT1414 how to acitvate my ipad if i forgot my icould id

how to acitvate my ipad if i forgot my icould id

Forgot Apple ID
https://iforgot.apple.com/password/verify/appleid

Similar Messages

  • HT5312 How to unlock my ipad when I forgot my passcode

    how to unlock my ipad when I forgot my passcode. Its been disabled for 2 days

    You will need to connect the iPad to the computer that you normally sync to and you should then be able to reset the iPad and restore/re-sync your content to it (http://support.apple.com/kb/HT1212) - you may need to put the iPad into recovery mode in order to be able to reset it : http://support.apple.com/kb/ht1808
    If you do it via a different computer then :
    If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.

  • How to unlock your ipad if you forgot your password, how to unlock your ipad if you forgot your password

    how to unlock your ipad if you forgot your password

    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • How to unlock my ipad when i forgot my passcode

    i forgot my passcode and i would really like to have my ipad back.

    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • Does anyone know how to unlock an IPAD, if you forgot th passcode

    Does anyone know how to unlock an Ipad, if you have forgotten the passcode.

    Follow the steps in http://support.apple.com/kb/HT1212 and you may need to it more than once.

  • HT1414 how to back up ipad to computer?

    hi i would like to back up my date from ipad to computer , somehow i cant do it, can you guidw me how to do it .
    many thanks

    How to backup
    http://support.apple.com/kb/HT1766

  • HT1414 how to restore my ipad mini

    After i did a update today. my ipad mini freeze with the itune logo.
    Cannot be restored. What can i do? Please help!

    Try restoring the iPad from recovery mode.
    If you aren't sure how to do that, use this Apple doc as a guide -> iOS: Unable to update or restore

  • HT201304 how to open my ipad if i forgot the access pin

    How can i open my ipad if I cant remember the access pin code to get into it?

    You can't without restoring the device.
    You have to restore the device within iTunes. You want to use the same computer that you always sync with so that you can restore your app data and settings. You can restore with any other computer, but you will lose everything on the iPad.
    Instructions can be found here.
    http://support.apple.com/kb/ht1212
    Make sure that you pay attention to the section at the very of the article that talks about having never synced your iPad with iTunes. You may need have to restore the iPad that way.

  • TS3694 how to restore my iPad if I forgot the password on iOS7.02

    My son created a password and he forgot what password. after many attempt, the iPad is disabled and cannot access the iPad.
    I try to connect back to the iMac to sync and restore, I am unable to do so as iTunes says" Go to iClould on your iPad and turn off Find My iPad before restoring your iPad"
    If I can go to my setting, I would have turn off password..
    pls help

    Forgot password
    http://support.apple.com/kb/ht1212

  • HT1414 I cannot open my ipad because of my passcode?how will i restore it?

    How to inable my ipad again?

    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • I forgot my passcode for the ipad and i can't connect to iTunes because it keeps giving me error message that i have to unlcok the ipad first... any advice on how to restore the ipad or unlock it?

    i forgot my passcode for the ipad and i can't connect to iTunes because it keeps giving me error message that i have to unlcok the ipad first... any advice on how to restore the ipad or unlock it?

    You have to restore the device within iTunes. You want to use the same computer that you always sync with so that you can restore your app data and settings. You can restore with any other computer, but you will lose everything on the iPad.
    This will tell you how to restore
    http://support.apple.com/kb/HT1414
    You will probably need to use recovery mode
    http://support.apple.com/kb/ht4097

  • HT1212 how do i rest pass code on an ipad if i forgot the pass code?

    How do I rest pass code on an ipad if I forgot the pass code?

    I hope you have updated your iPad! If not you will lose everything. You will need to a full restore as Johnathan said. http://support.apple.com/kb/ht1212
    If you have backed it up follow the process on the link provided and then restore it with this link http://support.apple.com/kb/ht1414
    Good Luck!
    joe1828

  • How to connect my ipad with mac using bluetooth?

    how to connect my ipad with mac using bluetooth?

    You can't so quit trying. Take a look at this to see what is supported with regard to Bluetooth connections in iOS.
    iOS: Supported Bluetooth profiles

  • How to connect my iPad 2 to Sony Bavaria wirless? Any other way than apple tv?

    How to connect my iPad 2 to Sony Bavaria wirless? Any other way than apple tv?

    http://store.apple.com/us/product/MD098ZM/A/apple-digital-av-adapter
    this one? if i connect it to the tv, will it work  if audio system is connected to the tv?

  • How to connect my ipad using static ip

    How to connect my ipad using static ip?
    Using Netgear Router.

    Go to Setting > General > Network > WiFi > Then tap the blue icon next to your network, from here you can setup a static IP on your internal network.

Maybe you are looking for

  • How do I get Logic to stop looking for a specific .wav file?

    I recently imported a project I started in GarageBand into Logic Pro.  Once in Logic, I edited and added to the project then saved it as a Logic project file.  I deleted the original project from GarageBand.  Now, when I open the Logic file, Logic is

  • Goods Issue of a Delivery After its been Updated.

    I am using SD_DELIVERY_UPDATE_PICKING_1 to modify the Delivery's picking qty, Then I use BAPI_OUTB_DELIVERY_CHANGE to change details on the delivery. These all work good. But since I do not know how to do a goods issue with BAPI_OUTB_DELIVERY_CHANGE,

  • Supported Graphics Card?

    I am considering upgrading from Final Cut Express HD to Final Cut Pro X. My MacBook pro is a few years old, and so I've been checking carefully to see about compatability. Can anyone tell me for sure whether or not this graphics card is supported: NV

  • Lock checks printing get ticked somehow

    Hello to all, we have a few customers experiencing this problem. When they want to print checks, well the checks simply don't get printed, with no warnings or messages. When at the last step, they click on Print, but then nothing happens. Each time w

  • T440s Systen Date Does Not Advance at Midnight

    This is a brand new T440s, i7, W7 Pro that I have had for 3 days.  On the first power-up, the system date was set on "tomorrow," in other words, one day ahead.  I reset the date, time, country and time zone.  It is set to sync with the internet.  Eac