HT1414 how to reset the  my i phone 5

how to reset i phone 5

If you're talking about reseting your iphone to factory settings, follow these steps:
http://support.apple.com/kb/ht1414
Cheers

Similar Messages

  • Reset the 7961 IP phone to factory defaults

    Does anyone know how to reset the 7961 IP phone to factory defaults ?

    maybe this will help. I found it on the internet but haven't got a change to test is.
    You can perform a factory reset of the Cisco 7940, 7941, 7960, 7961 and 7970 phone by holding down "#" as it powers up (or resets), at which point you then dial 123456789*0#. This is useful for many types of recovery, especially when the phone is so disabled that it cannot enter Network Configuration to reset to factory default.

  • I bought an apple iphone4 from a friend and they had lost and dont remember the apple id nor password can some tell me how to reset the phone and or both

    I bought an apple iphone4 from a friend and they had lost and dont remember the apple id nor password can some tell me how to reset the phone and or both

    It is not possible. You have hit Activation Lock, an anti theft measure. The last owner is the only one who can unlock it with their Apple ID. Tell them to go here
    https://iforgot.apple.com/
    Cheers
    Pete

  • ICloud password lost , how to reset the phone (4S)

    I gifted my sister IPHONE 4S before her Pregnancy ., after her Pregnancy she came to me that she forgot her details about her icloud account on her phone .., how to reset the phone now ?

    With iOS 7 and activation you will need the id and password. If she can't remember her password then she could try to get it reset via http://iforgot.apple.com
    If she can't get it reset via that site then she could try contacting Support and see if they can reset the password for her : http://support.apple.com/kb/HT5699

  • How to remove the IT policy from my Torch 9800, or how to reset the device to original setting

    I have a Torch 9800 formerly- used for business emails. According to our company policy there was an IT policy installed to the device hence would force the user to set password protecting the device.
    Now this device has been retired and I like to use it only for regular phone calls thus do not like to have a password protection. My question is:
    How to remove the IT policy from the device?
    or
    How to reset the device to original setting?
    I have been trying to swipe and scrub the device several times but that IT policy still exist. Need help......
    Solved!
    Go to Solution.

    See the RIM Knowledge Base article here for information on how to remove an IT Policy. See the Method Three in the link:
    KB14202 How to remove an IT policy from a BlackBerry smartphone
    Read this RIM Knowledge Base article to reset your device to the factory settings.
    KB18998 How to reset a BlackBerry smartphone to factory defaults
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • HT201303 how can reset the security question and answer ?

    how can reset the security question and answer ?

    Reset Security Questions
    Frequently asked questions about Apple ID
    Manage My Apple ID
    Or you can email iTunes Support at iTunes Store Support.
    If all else fails:
      1. Go to: Apple Express Lane;
      2. Under Product Categories choose iTunes;
      3. Then choose iTunes Store;
      4. Then choose Account Management;
      5. Now choose iTunes Store Security and answer the bullet questions, then click
          Continue;
      6. Sign in with your Apple ID and press Continue;
      7. Under Contact Options fill out the information and advise iTunes that you would
          like your security/challenge questions reset;
      8. Click Send/Continue.
    You should get a response within 24 hours by email.
    Another user had success doing the following:
    I got some help from an apple assistant on the phone. It is kind of round about way to get in.
    Here is what he said to do and it is working for me...
      a. on the device that is asking you for the security questions go to "settings", > "store" >
          tap the Apple ID and choose view"Apple ID" and sign in.
      b. Tap on payment information and add a credit/debit card of your preference then select
          "done", in the upper right corner
      c. sign out and back into iTunes on the device by going to "settings"> "store" > tap the
          Apple ID and choose "sign-out" > Tap "sign -in" > "use existing Apple ID" and you
          should be asked to verify your security code for the credit /debit card and NOT the
          security questions.
      d. At this time you can remove the card by going back in to edit the payment info and
          selecting "none" as the card type then saving the changes by selecting "done". You
          should now be able to use your iTunes store credit without answering the security
          questions.
    It's working for me ...I just have to put in my 3 digit security pin from the credit card I am using.
    Good Luck friends!

  • The HP C4480 all in one series PRINTER that I got free with my i-Mac is printing TINY print despite that my computer is set at 13 font Helvetica. How to reset the printer to normal print?

    The HP C4480 all in one series PRINTER that I got free with my i-Mac is printing TINY print despite that my computer is set at 13 font Helvetica. How to reset the printer to normal print?

    Is the Paper Size: set to US Letter and Scale: set to 100%
    Dennis

  • Does anyone know how to reset the fan on a MacBook Pro 13-inch (Late 2011) to it's factory setting speed (Maybe Terminal may help?)

    I have a late-2011 13-inch MacBook Pro running OS X Yosemite. (Standard configuration).
    My problem is that I downloaded a fan control application and it worked perfectly, but it started to get annoying so I deleted it.
    Does anyone know how to reset the fan speed back to factory settings (Maybe a command in terminal?)

    Hello damo1177,
    It should help to reset your system's SMC and NVRAM.
    Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/HT3964
    About NVRAM and PRAM
    http://support.apple.com/kb/HT1379
    Cheers,
    Allen

  • How to reset the password in macbook Pro? This is not related to apple id

    Hi,
    I gave my macbook pro for service. Initially there was no password set up in the system. However the service guys have put some password to install the applications. (This is not related to apple id and apple store apps). Can you please help how to reset the password?
    Regards,
    Arjun K M

    Welcome to Apple Support Communities
    As you have OS X Mountain Lion, try resetting the password from Recovery > http://discussions.apple.com/docs/DOC-4101
    It looks like OS X was reinstalled. After resetting the password, you will be able to log in and use your MacBook Pro

  • How to reset the iPad - the Location Services doesn't seem to work?

    How to reset the iPad - the Location Services doesn't seem to work?
    I can not get NFL Game Pass or Siri to work???

    Well you can plug it into itunes and under summary tab hit RESTORE. This should fix any software issues that you may be experiencing. About gamepass, I dont know, I dont have it. Siri is not on the IPAD2. Only on the 3rd generation Ipad, so you wont have it(going by ipad2 under your name).

  • How to Reset the EIM \ CIM System "sa" Password Procedure

    All.
    I have posted a document, "How to Reset the EIM \ CIM System "sa" Password Procedure" on this CSC site to assist you w\ the EIM "sa"user password reset procedure.
    I am also posting the procedure and word document attachment here.
    Let me know how helpful the procedure is.
    Bernard
    /* Style Definitions */
    table.MsoNormalTable
    {mso-style-name:"Table Normal";
    mso-tstyle-rowband-size:0;
    mso-tstyle-colband-size:0;
    mso-style-noshow:yes;
    mso-style-parent:"";
    mso-padding-alt:0in 5.4pt 0in 5.4pt;
    mso-para-margin:0in;
    mso-para-margin-bottom:.0001pt;
    mso-pagination:widow-orphan;
    font-size:10.0pt;
    font-family:"Times New Roman";
    mso-ansi-language:#0400;
    mso-fareast-language:#0400;
    mso-bidi-language:#0400;}
    Resetting The CIM \ EIM System “sa” Password Procedure
    Key: ‘ ‘ = Two single quotes.
    The following contain the query for blanking out the SA password for Partition 0 thru the backend.
    1. Go to SQL Server Management Studio and change the database to master database. USE “eGMasterDB”
    2. a. To verify user_name, and select user_id“save the results for backup.
        b. “SELECT user_id, user_name, password, case_insensitive_password FROM egpl_user WHERE user_id = 1”.
    Note: Be sure to save query and results, so that it can be provided for troubleshooting, if there is a problem.
    3. a. For Blanking out the SA password. UPDATE egpl_user WITH (ROWLOCK) SET password = ‘ ‘, case_insensitive_password = ‘ ‘ WHERE user_id = 1
    4. Verify the PW columns are now clear, by re-running the select cmd. “SELECT user_id, user_name, password, case_insensitive_password FROM egpl_user WHERE user_id = 1”.
    Then to successfully access and change CIM \ EIM “sa” User Account. (Partition 0)
    4. Go to login.  //<EIM server ip address>/system/
    5. Login with “sa” as the user name, no password.
    6. Navigate to Administration > Partition: System > Users, and highlight sa user under “List: Users”.
    7. Highlight the “Password” row, on the “General” tab, under “Properties: sa”.
    8. Select the box to the right of row and it will ask if you want to change the password.
    9. Select yes, enter new password.
    10. Save.

    It's great to have these types of procedures published on CSC!  Thanks, Bernard!
    -Paulo

  • How to reset the response status and response header

    Dear Masters
    Actually we are using NTLM Authentication process to get the system login id for our web application. The problem which I am getting is after running the NTLM Authentication Code I am not able to call the action class. It is telling 400 Server error bad request. I am using Struts Dispatch Action Class. In Dispatch Action I will be passing a name (eg. method) as a parameter in struts-config.xml file and using that parameter I will be calling the respective method in the Action class. The problem which I am facing is after running the authentication code I am not able to fire the action class. It is telling the error in the console as "parameter named method is not found". Actually in NTLM Authentication code they are setiing the response status to www-authenticate,NTLM. If I reset the response status back to the normal form I think i will be able to fire the action class. Please give me a suggestion on how to reset the response status and response header back to the normal form. Any solution to this is appreciated. Please respond your reply as soon as possible. Thanks in advance.
    Regards
    Ramesh

    Hi,
    I think, a servlet filter is what you need. Please check the following URLs on how to go about creating a filter.
    http://dev2dev.bea.com/pub/a/2005/05/decorators.html
    http://www.onjava.com/pub/a/onjava/2003/11/19/filters.html
    http://www.onjava.com/pub/a/onjava/2004/03/03/filters.html?page=1
    Cheers,
    vidyut

  • How to reset the military usage value in GTS Business partner

    Hello Experts,
    Does anyone know how to reset the Military usage value='2' to blank on the Business partner within GTS?
    I tried putting a blank there, clicking on the accept entries button followed by  saving the Business partner.
    It does not seem to work this way.
    Does anyone know if it's SAP bug for not having blank as one of the allowable values for the usage except when it's that way while newly created?
    The GTS implementation details are as follows:
    Any help with regard to this will be much appreciated......
    Thanks,
    Prashant.

    Prashant,
    As I already informed you, it is not possible to re-set the indicator to <blank>.
    From the program code, I can see that the usage indicator is only transferred from the feeder system during the creation of a customer partner.  The value in GTS is set either to '1' or '2' during creation, and cannot be changed by any subsequent data transfer from the feeder system.
    I think that logic is related to the fact that usage records may be created for multiple Legal Regulations, and those records may then be changed individually by the user in GTS.  On that basis, it would not be reasonable to over-write the values by re-transferring the customer from the feeder system.
    Regards,
    Dave

  • My ipad2 is disabled and my power button is not working, how to reset the passcode?

    My ipad2 is disabled and my power button is not working, how to reset the passcode?

    Hi, there is no fix for this unfortunately. However you can plug your iPad into iTunes and providing you have made a backup, you can restore from it
    you say its disabled, what does the message on the screen say?

  • How to reset the default window size

    Hi!
    I played around with the different layouts of Adobe Connect Pro and somehow got a real chaos of window sizes and window positions when changing the resolution as well. How can I reset the layout to the default layout settings (window size, window position, which window should appear)? At this moment I cannot move a windows because it's too big to move or resize it.
    Is there a possibility to undo these changes?
    Thank you!
    Best regards,
    Thomas

    Does anyone know how to reset the meeting layout during a running meeting?

Maybe you are looking for