HT1414 How would I know if my phone is unlocked?

I did the onlock for a phone once and I saw a congratulation message in iTunes saying my phone is unlocked. I didn't see the same message for my recent phone. How would I know if my phone is unlocked?

http://support.apple.com/kb/HT5014
Try a new sim not from the carrier who locked the iPhone

Similar Messages

  • How would I know that my phone is not fake?

    My iphone4 have a different regulatory logo printed at the back than the usual iPhones here in my country, how would I know that my phone is not fake? i bought it from Thailand but its regolatory logo seems to be 'South Korea'.

    These days it is pretty difficult to spot fake ones. You can always compare your specs to the ones listed on Apple's official iPhone page and see if it matches up.
    A few things fake iPhones can have that real ones dont: FM Radio, Expandable storage, colors other than black or white, Dual-Sim, stylus use (not compatible with a real iPhone), removable battery, lack of wi-fi or bluetooth. And of course if you can't use it in iTunes, that's a giveaway.

  • How do I know whether my phone is unlocked or not?

    Hello
    I am in Thailand trying to activate my iphone 4S with Thailand SIM card.
    but the phone message says below.
    This iPhone is not currently setup to work with carrier you're attempting to use. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked.
    so my question is how do I know whether my phone is unlocked one or not, before I go and try get new SIM card.
    Thank you very much. Your reply will be very much appreciated.

    If your phone will not work with another sim card, then it is likely to be locked to the original carrier.
    The only way to get your phone unlocked is to contact that phone company/carrier that the phone is locked to and hope that they offer unlocking.  Apple cannot unlock a phone for you, only the phone company that your phone is locked to can do that.  Some offer unlocking and some don't, so if the phone company does not offer unlocking, then you are out of luck and you'll either have to buy a new phone or use a sim card of the comapny - take out a contract with the compnay that the phone is locked to.
    Anyway - contact Apple to see whether your phone is locked conclusively and if you talk to them they can tell you what they need.

  • TS3198 After doing the backup and restore how do you know if the phone is unlocked if you do not get the message: "Unlock Complete. Congratulations, your iPhone has been unlocked. To set up and sync this iPhone, click Continue."

    After doing the backup and restore how do you know if the iphone is unlocked if you do not get the message: "Unlock Complete. Congratulations, your iPhone has been unlocked. To set up and sync this iPhone, click Continue."

    If you don't get the message, your phone is NOT unlocked.

  • HT1414 how do i know if my iPhone is unlocked?  Just by looking at it.

    how do i know if my iphone 4 or 4s is unlocked?

    If you are referring to the carrier lock, there is no way to tell just by looking at it. You'll need to try it with a different carrier's SIM and see, or perhaps if you call Apple Support, they may be able to tell you the lock status.
    If the carrier lock is not what you mean, please post back and clarify.
    Regards.

  • HT1414 how do i know if my iphone4s was unlocked successfully

    Is there any way to know if my iphone4s is unlocked after retoring it using the itunes?

    After folloing the directions that your carrier provided, itunes will display the Congratulations your iphone is unlocked message

  • How do i know if my phone is unlocked

    hi ive just bought an iphone 4s of a friend need to know if it is unlocked?? thanks

    Did your friend do this?
    What to do before selling or giving away your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT5661
    Find My iPhone Activation Lock: Removing a device from a previous owner’s account
    http://support.apple.com/kb/ts4515
    Buying or Selling a Used iPhone or iPad Running iOS 7? Read This First!
    http://www.makeuseof.com/tag/buying-or-selling-a-used-iphone-running-ios-7-read- this-first/
     Cheers, Tom
    BTW
    You posted in the iPad forum instead of the iPhone forum. To get answers to your question, next time post in the proper forum. See https://discussions.apple.com/index.jspa  I'll request that Apple relocate your post.

  • Lost my phone today, is there a locator on it? If yes or no, how would i know?, Lost my phone today, is there a locator on it? If yes or no, how would i know?

    How would I know if i had a tracker or locator on my phone if i had one? Do all iphones have one?

    If you enabled "Find My iPhone" on the device prior to it being lost, you may be able to track it.  This assumes the device is powered on, has a network connection (Wi-Fi or Cellular data), and has not been restored as new by whomever found it.
    If you did not enable the feature, the only way to locate the device is to physically start looking for it.

  • Hi anybody there who can help me ha..? My phone 5s was stolen 1 month ago..Find my phone is no a big deal, How can i know whether my phone is in use??

    Hi anybody there who can help me ha..? My phone 5s was stolen 1 month ago..Find my phone is no a big deal bcz it seems to be wiped out all data including settings. it might be in use somewhere turning new fresh Gadget.  How can i know whether my phone is in use??

    You would know for a fact if the device is in use, but if you go back to the find my iPhone app in iCloud.com, you can either select to erase it, or place it in lost mode, in which case, once the device makes a connection to the internet, it will automatically go into that mode.

  • HT201328 how do i know if  a phone is locked or unlocked?

       how do i know if  a phone is locked or unlocked?           

    Where did you purchase it, & from whom? The only reliable way to determinr the phone's locked/unlocked status, if you don't know, is to call AppleCare.

  • How Do I know If my phone is charge

    How do I know If my phone is charge? I put it to charge and in my users manual it saids that when the battery simbol has to become blackwhen is charge but It doesn't . and I will leave it for at least 6 hours and then the next day or two I will have to charge it again because the battery starts to go down really fast even if I don't used or opened. Could some one help me please! Also is there any way to change the message ring tone?
    Solved!
    Go to Solution.

    When device is charging at the right side of battery there is a smal lighting icon displayed.
    Also check this link:
    http://www.blackberrynews.com/2008/05/20/battery-use-tips-for-your-maximum-battery-life/
    I think it will be interesting for you.

  • What is the print program for adobe form MEDRUCK_PO, How would I know that?

    Hello All,
    I am new to ADOBE forms and I have a requirement to develop a new Purchase Order Adobe Form . I need to confidure output types too. I am copying 'NEU' to 'ZNEU', and form name 'MEDRUCK_PO' to 'ZMEDRUCK_PO', but what would be the program name and form routine? How would I know the program name and form routine for new output type/form combination.
    Any kind of help is highly appreciated and rewarded.
    Thanks in advance
    Abaper

    I am working on exactly same thing - customizing pdf form MEDRUCK_PO.
    I copied MEDRUCK_PO to Z_MEDRUCK_PO and put my changes into the form.
    You will use transaction SPRO to display the current routine and form and put your changes into effect.
    SPRO-> click tab SAP Reference Image->Material Management->Purchasing->Messages->Forms(Layout Sets) for Messages->Assign Form and Output program for Purchase Order.
    In the Form column change the form name to yours - Z_MEDRUCK_PO for example. You can also change the routine name if you want.
    Take a look at SAPFM06P, specifically at includes FM06PE03 and FM06PE04.
    You will find routines adobe_entry_neu, adobe_entry_mahn and adobe_entry_aufb in FM06PE03. They call routine adobe_print_output located in FM06PE04.

  • HT1923 When I try to uninstall iTunes I get a message saying iTunes 64 msi can not be located and I should enter an alternate path. How would I know where it it is? I get the same message when trying to install the update to iTunes 10.6.1.

    When I try to uninstall iTunes I get a message saying iTunes 64 msi can not be located and I should enter an alternate path. How would I know where it it is? I get the same message when trying to install the update to iTunes 10.6.1.

    Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    To install the utility, doubleclick the msicuu2.exe file you downloaded.
    Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • How do I know if the iphone is unlock? or world phone?

    Hi there,
    How do I know if the iphone is unlock? or world phone?
    Thanks.

    Try a SIM from a different carrier.

  • How would I know if any one post a thread in the Forum

    Hi All,
    Please tell me how would I know if any body post a thread in the  forum??
    Regards
    krishhna

    Hi,
    I just read the "Suggestions and comments" forum and I found out that you did create a thread called "How would I know if any one post a thread in the Forum ".... So I knew that some one had posted a thread in the forum...
    Regards,
    Oliivier

Maybe you are looking for

  • PXI-8532 DNET card is not detected in MAX

    Hi all, I'm using NI PXI-1031(4 slot PXI chassis). I have the following cards in the respective slots Slot 1= PXI-8106 Controller Slot 2= PXI-6259 card(AI) Slot 3= PXI-6509 card(DI,DO) Slot 4= PXI-8532 Card(DNET) In MAX(Measurement & Automation Explo

  • Need to merge a csv file using external tables into a main table

    Hi, I have a csv file which contains the date(with time stamp), column1(number),column2(number), column3 (number). I am using external tables concept to load the data froom csv to this external table and then merging into the main table. Problem here

  • Multi-select drop-down in JDeveloper

    Hi, I'm using Jdevelopre 11112 and JHS 11.1.1.2.29, I need to have an unbound multi-select dropdown in jheadstart. this is an impossible fact in jheadstart. I need to make it manually in JDeveloper and now I need to know how to do so ? Thank you in a

  • Epson 4880 stopped printing after installing ver. 9.17

    Epson 4880 stopped working after installing ver. 9.17 driver.

  • JDBC+8859-2 charset

    Hi! I want to use ISO 8859-2 character set. Is there some property, where I could change the default charset, or I have to include it in the JDBC URL? Somebody can send an example? Many thanks: Zsolt