HT1414 I cannot access the internet on my home network but can on any other network

My iPad is able to access the internet on all other networks but my new home network doesn't allow me to get on.

I do not think so.  It seems that this has happened to some people that use comcast.  I am wondering if anyone has figured out a way to override the issue.

Similar Messages

  • I cannot get into router page via server? But can on any other device?

    Comcast Business Cisco 3939B wifi router.
    I can log into the router page just fine on ANY other workstation or laptop direct connected to any of the 4 ports of the router using 10.1.10.1.  I can access via Android phone browser via wifi also.
    It just asks for username and password.  No problem.
    BUT.
    When I try to do this SAME thing from the Windows Server 2012 R2 Essentials connected via Ethernet port using Windows Explorer, it gets to the username and password page and after that, just sits there and says "logging in...".
    Does Windows Server 2012 R2 Essentials by default prevent this?  or Internet Explorer do this?  Do I need to set something on the server?
    Not sure if the subnet mask 255.255.255.0 has anything to do with it?
    thank you for any help.
    This topic first appeared in the Spiceworks Community

    Try these;<BR><BR>
    Clear the Cache '''''Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"'''''<BR><BR>
    and<BR><BR>
    Remove Cookies '''''Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"'''''<BR><BR>
    If that does not help,
    '''''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode start Firefox in Safe Mode]'''''.
    Let us know how you do.

  • I cannot access the internet, I tried to answer that said to go to settings, safari, tap clear history, cookies and cache, cut off, then on, but it did not work.  When I go to internet the screen is grey??? please help I am a new user!!

    I cannot access the internet the screen is grey, I have tried by using the answer from someone but it does not work...I went to settings, tap safari, then clear the history, cookies, and cache, then turn off ipad.  When I did that twice, it did not work.  How long does it take for the clear history to work?  I am a brand new
    user of the ipad2 and I am disappointed that this is happening already.

    Have you been able to access the internet previously and now it's suddenly not working, or are you still trying to access the internet for the first time on your iPad?  Are you at home trying to connect through your home router?  If you are at home, did you put your home routers encryption code as your password?  The encryption code is what your iPad is looking for and it is usually found on the router and is typically a 13 digit combination of letters and numbers.  Let us know......

  • I did a software update on my ipad and now cannot access the internet. how can i fix this?

    I did a software update on my ipad to 8.1 and now cannot access the internet.  How do I fix this?  My mail updates, but to get internet access I had to move from wifi to cellular data, and now even cellular data does not allow me access.

    Hi Go to settings Reset Network Settings After Reset you need to enter your Router wireless key Before you do this turn off your Router for 30 seconds Also an option is to go on Websites for your make of Router look for any Firmware updates but you can do this later. Cheers Brian

  • When I open a second Profile while another is running the second cannot access the Internet until I close the first. Why?

    I often have occasions to run more than one Profile simultaneously (usually because of different add-ons I've installed on different Profiles). In the past this worked fine. Now, all of a sudden, if I open a second Profile while the first is running the second cannot access the Internet until I close the first. It keeps looking for a website, and failing, until the system "times out". If I close the first Profile, the second is then able to access the Internet.
    Note: this is not a problem with opening a second Window in Firefox. As long as they are from the same Profile they will both work fine. Nor does this stop me from using a second Profile to look at website files I have saved to my computer. The only problem is that the second Profile cannot get on the Internet.

    I just checked, the setting was for "Automatic proxy configuration URL", in the past it was set on "No Proxy". So I'll try changing that (and/or try other proxy options), and see if that solves the problem.
    If it does, then just one (academic) question remains: why did that happen in the first place? I don't care what the answer is, so long as your suggestion solves the problem.
    Thanks.

  • TS1398 my ipod touch worked fine on my wifi home network. After not using my ipod for a month or so, I cannot access the internet. All other devices work fine. Thus, its not my home wifi....I tried resetting...forgetting....nothing works...still cannot ac

    hello - my ipod touch worked well until a couple of months of non-use. Now, I cannot access the internet thru my wifi. All my other devices have no such problem. I have tried resetting wifi, "forgetting network" turning wifi off and on....nothing works....can anyone help?

    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router.
    - Reset networks settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    Does the iPod see the network? Error message? Does the iPod connect to other networks?

  • I CANNOT ACCESS THE INTERNET VIA MOZILLA FIREFOX. BOX COMES UP AS FOLLOWS:-

    I CANNOT ACCESS THE INTERNET VIA MOZILLA FIREFOX
    A BOX COMES UP WITH THE FOLLOWING:-
    firefox-exe - Entry Point Not Found The procedure Entry Point
    could not be located in the dynamic link library mozsqlite-3-all.
    PLUS
    When I access the internet via my server (Tiscali now Talk-Talk)
    I have to enlarge each page. this is not now automatic.
    What on earth has happened?
    Please Help.
    Thank you.

    You need to do a clean reinstall.
    Download a fresh Firefox copy and save the file to the desktop.
    * Firefox 5.0.x: http://www.mozilla.com/en-US/firefox/all.html
    * Uninstall your current Firefox version.
    * Do not remove personal data when you uninstall the current version.
    Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
    * It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    Your bookmarks and other profile data are stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.

  • I installed Mountain Lion on my iMac. Now I cannot access the Internet. All the other computers and tablets have no problem. I did PRAM and MC reset, modem reset, etc., all the usual ju-ju. I also cannot connect on my local network to any other computer.

    I installed Mountain Lion on my iMac. Now I cannot access the Internet. All the other computers and tablets on the network have no problem. I did PRAM and MC reset, modem reset, etc., all the usual ju-ju. I also cannot connect on my local network to any other computer. Yet Network control panel says I am connect to the modem, and Network Diagnosis says I am connected to the Internet. It's like the blind man who has eyes that cannot see. BTW, I am not some newbee. I have been a Machead since the early nineties and set up a half dozen networks, including the one I am using at home to which the iMac mysteriously is there but not. This has me stumped! I am considering going back to 10.7!

    Select  ▹ System Preferences ▹ Network ▹ Advanced ▹ TCP/IP. What values are shown for the following:
    Configure IPv4
    IPv4 Address
    Subnet Mask
    Router

  • Is there a way to access the web-based setup for my router if I cannot access the internet?

    Okay, I need to change the ip address settings on my router. I have a WRT54G Wireless router. I cannot access the internet on my computer connected to the router, and do not know how to change the router settings without accessing the web-based setup page. So, back to my question. Is there a way to access this page if I cannot connect to the internet?

    On the back of the router is a small reset switch. Using a paper clip or other small item, press the switch in and hold it for a few seconds. This will reset the router to the default IP address of 192.168.1.1. Enter that address in your web browser, and be sure your computer is attached to the router by an Ethernet cable. Don't attempt to do this using the wireless connection.
    Once you have reached the web configuration utility you can change the DHCP settings.
    To give your PC a static IP address you will need to open your network connections panel and, assuming your using Windows XP, make the changes from dynamic IP to static there.

  • Equium P200-1IR - Wireless is connected but cannot access the internet

    Hi ya,
    Need a little help!!
    I have just bought an Equium P200-1IR.
    I have turned the wi fi on.
    I can see my router which is Talk Talk.
    I can get the laptop to connect to the router and it says that I am connected,
    however I cannot access the internet.
    I tried the same process by inserting a wi fi dongle into the USB port
    on the laptop and exactly the same happens.
    We have other computers in the house that connect to the router and internet
    ok using the wireless dongle.
    I have plugged a hard wire connection from the laptop to the router and I can
    access the internet immediately with no problems, however would love
    to use the wireless feature.
    Any help really appreciated....Thanks
    Waynec

    Do you use the right channel and right encryption settings?
    This should be checked!
    It should be able to change the WLan channels in device manager -> WLan card -> Properties -> Advanced tab
    But I would also recommend disabling the encryption and password in router settings and to connect to Open Wlan of course this should be done only for testing purposes if the notebook would be able to connect to the open router, then this would mean that you used a wrong password.
    How about WLan driver update? Did you update the WLan driver? If not do that!

  • Cannot access the internet even though I'm connected to my WIFI network

    I cannot access the internet even though I am connect ed to my home network or guest network.  My desktop pc works fine, but not the laptop.

    The new laptop shows it is connected but will not let me access with passwords I have written down.  What or where is the password it is looking for?

  • HT1766 For some unknown reason, I cannot access the internet through my Wi-Fi connection, even in my own house with the computer on.  What shall I do?

    I cannot access the internet with my Wi-Fi connection on my IPad2.  It began with my trying to reply to a message.  I then got a msg that I had the wrong password or user name.  Now I have no access and cannot get or send mail, or access the internet.  What shall I do?

    If you have access to wifi router you may check its log and see what does it say...
    Try set the router for no hidden and no password wifi and try to connect. If you iPad can connect then add password to wifi settings on the router and try to connect again... etc...

  • I am connected to my wireless network but cannot access the internet. Any ideas?

    I am connected to my wireless network but cannot access the internet. Any ideas?

    Your router may not have given your iPad a valid IP address. Go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
    Sometimes the fix can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPad (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
    If you need more help please give more details on your network, i.e., your router make, model and version, the wifi security being used (WEP, WPA, WPA2), etc.

  • WRT54G router cannot access the Internet

    My wireless PC can access the router but cannot access the Internet.
    When I ping linksys.com - the ping times out; however, when I ping my ISP I get 4 pings back. When I ping the router the ping is successful as I get 4 pings back.
    I am sure there is a fix for this problem. Can anyone help me get connected to the internet?
    Thanks
    I just got DSL in my area and installed it. I have a Linksys WRT54G router and a zyxek 660R DSL modem. I have a PC #2 in the room down the hall and a PC #1 in another room. I have a Wireless-G USB adapter in PC #2 (this is the antenna for the wireless connection). Everything is installed and PC #1 can connect to the internet through the modem and router. However PC #2 can only reach the access point (router) and will not access the internet. I can connect to the internet for PC #2 when an ethernet wire is used directly but it is not great to have a wire running down the hall. I pinged the router from PC #2 and the echos look fine. So it can certainly reach the router. When I use the Local Network tab and click on DHCP Clients table both PCs are displayed. So how can a PC use a wireless connection to reach the internet? I have spent 4 days already trying to get this to work. My ISP can't seem to help.
    Thanks for your help.

    hi... logon to router's setup page and try changing channel to 1 or 11, click on the advanced wireless settings and try reducing beacon interval to 50, fragmentation and RTS threshold to 2304, also try upgrading latest firmware on the router...also
    if you are using Win XP system try uninstalling the adapter from the computer...click on start >> programs >> wireless G USB adapter >> uninstall, put the CD in for the adapter and restart the computer, one window pops up "found new hardware" try installing the drivers, no need to install WLAN software or utility and use windows WZC (wireless zero configuration) to manage wireless connection...check whether it works for you or not and let me know the results.

  • Apple Applications cannot Access the Internet, Others can

    I've owned my MacBook for about 1.5 years now and it's starting to have some stability issues. Daily hard-locks are becoming the norm. I suspect hard drive issues may be to blame. I have repaired permissions and verified and repaired the disk. That seemed to help for a little while, but this latest problem is throwing me for a loop...
    Apple applications cannot access the Internet. Apple Mail (RSS, POP, ad IMAP), Safari, iTunes (PodCasts, iTunes Store), and Software Update all time out while trying to contact servers. Firefox, OpenVPN, command line SSH, ping, etc, all have no problems.
    My next step is a reformat, but this week is a really inconvenient time for me to do a backup and restore and I'd love a quick-fix if there is one. Any suggestions?

    Thanks. I just realized that is was serious user error. I forgot I had enabled Socks proxy in Internet connections a couple of days ago and that my Mac apps would still be using that while my other apps would not. Thanks!

Maybe you are looking for