HT1414 I get error "cannot restore phone because not enough memory" when trying to restore iphone 5

My iphone 5 is freezing continuously and will not respond until turning off and on. It then freezes again with the first usage and will not respond with any button. I tried restoring it but get the message " Cannot restore phone because there isn't enough memory". Is anyone familiar with this problem?

Read https://discussions.apple.com/message/20416055#20416055

Similar Messages

  • Bridge CS5.1 is not respoding.  Getting error messages that there is not enough memory and need to clear central cash.

    On MAC OS X 10.7.5.  Editing raw files in Bridge and have been getting error messages every time I open Bridge that there is not enough memory.  Other messages are to clear the central cache.  Can't find the central cache on my system.  Please help!

      Have you tried completing the pano without selecting edge fill. Then crop the result or use the clone stamp to fill the blanks.

  • HT1414 What do I do if phone does not pop up when trying to reset?

    I am trying to reset my phone.  It says to choose your phone when it pops up.  Mine is not popping up.  I have already tried restarting computer and unplugging phone and replugging.  Help

    See here:
    Windows
    http://support.apple.com/kb/TS1538
    Mac
    http://support.apple.com/kb/TS1591

  • Itunes error message "file name here cannot be copied because an error occured. There is not enough memory available."

    Hello,
    I have an iPad 64gb. Been trying to load files on it with plenty of memory to spare. generally though i cant load more than about 35mb at a time before the message "file name here cannot be copied because an error occured. There is not enough memory available." pops up. I keep needing to close itunes, unplug my ipad, and restart it again. but the issue remeains the same.
    when i open up task manager i notice that memory usage by itunes goes from 95,000K to 1,750,000K in under 30sec which is when i get the error message. any solutions? currently running itunes on Vista.
    Thanks in advance.

    trash stuff form your computers hard drive to free up space.

  • "Could not be copied because an error occured. There is not enough memory."

    Hello,
    I recently got an iPad 64gb. And have since been loading all of my Comic backups onto it (Via Cloudreaders). I've got 32.5gb used and 26.4gb Free. Every 20-30 issues or so I get an error that says "Comic book name here" cannot be copied because an error occured. There is not enough memory available.
    Now the easiest way to fix this is to close iTunes and restart it - This will allow me to add another 20-30 so issues before having to do it again. However that doesn't seem to be right expecially when i'm unable to backup my ipad because I get this error.
    Is there anyone out there who can help me?
    Thanks in advance.

    Update:
    I upgraded to iOS 5. Same problem.
    New information:
    I've noticed my iTunes use from around 65,000 K int he Memory section of Processes (Windows 7). However right before the crash it's using almost 2,000,000 K in the memory section.

  • The app could not be added to your itunes library because an error occurred. There is not enough memory available.

    Hi guys,
    When i drag and drop an application(development app built) to my iTunes> Library > App. Then i got a error "The app 'XYZ' could not be added to your itunes library because an error occurred. There is not enough memory available." Please see my image below:
    I seached any solutions to fixing for those problems. But i did not still to  fix them.
    Apple Support Team please help me for this problem! Or anyone? Can you help me for fix this problems?
    Thanks guys so much!

    Thanks for your feedbacks "diesel vdub".
    "Is there sufficient free space on the computer?"--> My space on computer hardisk either ipad free more.
    "Has iTunes been closed and relaunched?"--> I launch this app any more time, and it still an error.
    "Has the computer been rebooted?"--> I try reboot my computer and --> open itune--> drag may app to itune--> Still occurr this message.
    Have you other way for fix this propblem?
    I running:
    My computer: Window 7 Ultimate
    My ipad: iPad 2, iOS 7.01.
    iTunes Application on Window version: 11.2.2.3
    Anyone, please help me!
    Thanks all.

  • Error on running LV application-not enough memory to complete this operation

    Hi,
    Developed an application for multi plot graph.
    The graph is having around 25 plots and and its fetching many records from the database for the pltting purpose.
    This LV application is a module of a VB real time application which is running always on the PC.
    Now when the user tries to plot the graph...some times he is getting an error message as the following
    "not enough memory to complete this operation"
    What are the reasons for such an error message and how do i eliminate this error?

    LabVIEW cannot allocate the memory needed to complete the task at hand.
    Prevent data copies of large datasets.
    Reduce the amount of data in your graphs. (Not all point can be seen as individual points, if the scale is from 0-1000 you can plot 1000 points, but with the scale 0-1000000 you can also have 1000 point instead of 1000000 and see almost no difference.
    Regards,
    André
    Using whatever version of LV the customer requires. (LV5.1-LV2012) (www.carya.nl)

  • I just upgraded to Yosemite. Now when I try to open Excel, I get a message that there's not enough memory.  When I check the storage under "about this Mac" it says I have 150 GB of 249 GB.  Help please.  Thanks

    I just upgraded to Yosemite. Now when I try to open one particular document in Excel, I get a message that there's not enough memory.  I can open other documents.  The document I can't get to is the spreadsheet of my passwords.  Go figure.  When I check the storage under "about this Mac" it says I have 150 GB of 249 GB.  I have a MacBook Air.  Help please.  Thanks, Connie

    I just upgraded to Yosemite. Now when I try to open one particular document in Excel, I get a message that there's not enough memory.  I can open other documents.  The document I can't get to is the spreadsheet of my passwords.  Go figure.  When I check the storage under "about this Mac" it says I have 150 GB of 249 GB.  I have a MacBook Air.  Help please.  Thanks, Connie

  • When trying to download an app, a message pops up and says "cannot download due to not enough memory". I have checked there seems to be enough memory on pc and ipod?

    when trying to download an app, a message pops up and says "cannot download due to not enough memory". I have checked there seems to be enough memory on pc and ipod?

    I followed the advice of another user, cleared my payment information and re-entered my credit card info and this took care of it, I was immediately able to download new purchases. Apparently they called and got this info from someone at Apple, there is some sort of "bug".  worked for me...hope it helps you out too!!

  • Cannot syn iphotos . says " Not enough memory where as i have 34 gig available on ipad

    cannot syn iphotos . says " Not enough memory where as i have 34 gig available on ipad

    FYI.. it's storage space not memory.
    Try restarting your iPad. Press and hold the sleep / wake button until you see the red slider then swipe to the right to power off. Then press and hold the sleep / wake button until you see the Apple logo.
    Restart your computer.
    Now try syncing photos.

  • Cannot initialize Photoshop CS2 "not enough memory" error

    I had Photoshop CS2 installed and running fine on a MacBook Pro (10.5.4, 2GB RAM), until it suddenly crashed and now will not open. Gives the error message: "Could not initialize because there's not enough memory." I have 1.5 GB of memory free, and 70 GB of disk space free. I've reinstalled, tried creating a new user to run it, but nothing is working. I've found a couple of mentions of the same problem online, but no solutions. Can anyone help me?

    Hi Jen,
    I don't know how MacBook works but it sounds like I just had basically the same problem which John Joslin had the correct answer.  He said, "Try resetting your preferences as described in the FAQ at:
    http://forums.adobe.com/thread/375776?tstart=0
    You either have to physically delete (or rename) the preference files or, if using the Alt, Ctrl, and Shift method, be sure that you get a confirmation dialog.
    This resets all settings in Photoshop to factory defaults.
    (A complete uninstall/re-install will not affect the preferences and a corrupt file there may be causing the problem.)"
    I have windows vista ultimate so I'm not sure if this will help you but my preferences were at:
    C:\Users\username\AppData\Roaming\Adobe\Photoshop\9.0\Adobe Photoshop CS2 Settings. I just renamed my pref's and photoshop opened right up.
    Good Luck!

  • Get error message that server could not be found when sending email thru iPhoto

    I have established a icloud/mobile me account.  Trying to use iphoto to send photos with emails and always get error message that server coule not be found.

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • Can't sync photos because "not enough memory is available"

    Hi there!
    I updated my iPhone 3GS 32GB to iOS4 yesterday.
    When it came to syncing my Apertue Photo Library, it comes up with the same error message all the time after optimizing a handful of picture for the device:
    The iPhone "*** iPhone" cannot be synced.
    There is not enough memory available.
    Though I have over 10 GB free memory.
    I have used the iPhone as an external USB drive with "iPhone Explorer", and I used most of the 10GBs then, but deleted all the files. First, I thought they weren't deleted properly, but that isn't the case.
    Oh and I can sync movies, music etc. The problem only occurs to my pictures...

    Are you Mac or PC?
    On the PC I read to go to the *Device Manager*, then highlight the Computer and then in the Action Menu click *Scan for Hardware Changes*
    This seemed to fix the problem for me. I also restored the system. Not sure what order since I was just trying everything!
    Good Luck

  • Photoshop CS2 Cannot read PNG files--"Not Enough Memory"

    Hi! I have a bit of a problem. I've scoured the interwebs for days but can't find a solution.
    My copy of PSCS2 was able to open PNGs in the past, but it just up and decided it doesn't want to anymore. I'm serious--I can't think of any major overhaul or anything I did to cause it, but now it won't read them correctly. It says there's "not enough memory," which doesn't really make sense, when I have a Macbook Pro and nothing running in the background. On top of that, the particular files I've been trying to open are barely 100kb. I've used canvases upwards of ten thousand square pixels in dimension with no problem.
    This is with any PNG file. It's not an "incorrect extension" problem, because I made these files and just need to reopen them to edit things.
    Here are some screenshots that show what's been happening; nothing exciting, but just in case someone notices something I don't:
    That's the picture I want to open.
    And that's what pops up.
    :/ I'm a little dumbfounded. Halp?

    Now, this is strange.
    I restarted my computer and now the message has changed--to a simple one, but albeit still confusing.
    Sigh.
    I didn't do anything but restart my computer.

  • Can't synch Ipod because not enough memory

    I just bought an iPod Classic.  When I tried to synch it showed about 80 GB of data, but I got the message, " The XXXXX iPod can not be synchged .  There is not enough memory available.  Anybody have an idea of what is going on? 

    Are you Mac or PC?
    On the PC I read to go to the *Device Manager*, then highlight the Computer and then in the Action Menu click *Scan for Hardware Changes*
    This seemed to fix the problem for me. I also restored the system. Not sure what order since I was just trying everything!
    Good Luck

Maybe you are looking for

  • Document Generation Wizard - disregard picked Items for Delivery Notes

    Hi, We have a requirement from a customer whereby when they are creating Delivery Notes from Sales Orders via the Document Generation Wizard to exclude quantities of Items which have been picked on the Sales Order already.  E.g. Sales Order, Product

  • Selection of BOM and Routing in Cost estimate

    Hi I have an issue with the cost estimate run. We are using CK40n for cost estimate. The selection method in MRP 4 is defined as 3 (only by prod version) and the version indicator is maintained in the costing views also. When we run the cost estimate

  • Accessing column clicked data value

    I have a datagrid with an itemDoubleClick function. In the function I can get the row and column that was clicked but cannot figure out how to get the value stored in that cell. Using the code.. datarequest.lastResult.MyData.answer[event.rowIndex] .d

  • RH7 some pods won't display

    Hi, I am now trying RH7 for 5 days. When I click the menu View > Pods and then each pod, not all display. Only the following display. Others do not come up at all. Any clues? Project Manager Project Setup Single Source Layouts Conditional Build Tags

  • Json encode and Recordsets

    Hi, I have a jquery autocomplete that requires a json response for a remote database. I am not familiar with json, so, I'm not sure if I'm using json_encode correctly. The jquery script on my input page is straight from a working demo, so the problem