HT1414 i have tried to update my i.phn 3g from 4.1 to 4.2 but it failed and then i tried to restore then its also failed,,now my device is not working,,,can somebody help me?????
i have tried to update my i.phn 3g from 4.1 to 4.2 but it failed and then i tried to restore then its also failed,,now my device is not working,,,can somebody help me?????
No one can help you without knowing the error message and error number when it fails.
Similar Messages
-
TS3276 my server went down and now my email is not working, can anyone help please?
My website server went down and now my email is not working (though the server is back up)
Does anyone know what I need to do?
I'm told by my website hosts that I need to 'reconfigure authentication" but I have no idea how to do this, they are now closed for the weekend and I need it fixed before Monday morning. Could anyone tell me where to find step by step instructions. I've tried but have made matters worse and the couple of mail accounts that WERE still receiving email are now also not.
Help please!Hi Eyen80,
If you are having issues with your iPhone’s camera not functioning, you may want to troubleshoot using the steps in this article -
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Specifically -
Camera isn't functioning or has undesired image quality
If the screen shows a closed lens or black image, force quit the Camera app.
If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
Try turning iPhone off and then back on.
Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
Try to remain steady while focusing:
Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
Note: Video-recording features are not available on original iPhone or iPhone 3G.
If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
Thanks for using Apple Support Communities.
Best,
Brett L -
My ipad does not work. can somebody help me??
my ipad does not work...
can someone help me???Hold down the Home and Sleep buttons until a white Apple Logo appears on your screen. Make sure it is charged up as well.
-
...anyone?
Try on another computer
Then see:
-1 error
-1 error too
If still problem means a hardware problem. In that case make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
Hi, my illustrator CS5 freezes at startup. It was working properly till last friday, now i cannot open it. ¿can somebody help me?
Leo,
You may try the list (5) being less likely).
The following is a general list of things you may try when the issue is not in a specific file, and when it is not caused by issues with opening a file from external media. You may have tried/done some of them already; 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
If possible/applicable, you should save current artwork first, of course.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to at least 5 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible), for CS3 - CC you may find the folder here:
https://helpx.adobe.com/illustrator/kb/preference-file-location-illustrator.html
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall (ticking the box to delete the preferences), run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html -
Hi Guys,
I am using the full width video widget on a site. The widget was working perfectly however I have just added additional content to the site and re-uploaded and now the video is not working! Please help I have tried everything and am freaking out as this web-site has been payed for by my client.
AlexMany thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.) -
My iphone is no longer working I have black screen with a picture of the itunes logo and a USB cable. When I try to connect my iphone to itunes the device is not detected, can anyone help me? I desperatley need my phone back
I have had a 3GS for 2+ years. After upgrading to IOS 4 (now 4.3.5) I began having problems. In the past week, my screen went to the itunes logo and USB cable twice -- unprovoked -- just found it sitting there like that! I connected to itunes and it did restore from a backup but it is a major inconvenience. I am also searching for answers, but better back-up regularly!
-
i plugged in my ipod and now i get the error message: Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled" - i have a MAcBook pro and now my USB ports do not work - can anyone help me ???
Sometimes you have to reset the SMC two or three times for it to work, don't know why. I've seen that error message before and 100% of the time it was fixed with an SMC reset. I suppose it's possible that your keyboard or mouse IS drawing too much power, do you have access to another you could try?
-
My iMessage is not working, can anybody help?
My iMessage has not been working since last Thursday. i have tried all 'resets' and it still is not working. can anybody help? is anybody having the same problem?
Hello, hollieaj.
Thank you for visiting Apple Support Communities.
I would recommend going through the troubleshooting steps in the article below.
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
Cheers,
Jason H. -
my device was not registered as part of the Developers Program and now my devices are not working, i can not restore nor update my devices... any suggestions? i was running my devices on iOS 7 Beta that i downloaded back in August
If you're not a registered developer, it means you've stolen Apple's software. Now you come to an Apple forum and ask for help? You're lucky you're not being prosecuted!
You can receive no help for stolen software here. Enjoy your iBrick. -
I keep pressing verify and it not working can you help me out , Thanks Please reply back .
I keep pressing verify and it not working can you help me out , Thanks Please reply back .HELP!
Have you tried logging out of your account on the phone by tapping on your id in Settings > iTunes & App Stores and then logging back in and seeing if that 'refreshes' the account on it ?
If that doesn't work then you can contact iTunes support via this page (these are user-to-user forums, you are not talking to Apple here) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page -
Ipad2 - cover lock not working - can anybody help?
Ipad2 - cover lock not working - can anybody help?
Settings -> General -> iPad cover lock/unlock -> On
Try toggling this setting on then off. Are you sure the case you have has the magnets that are compatible with this feature. Also with the setting turned on you could try a Reset, hold down the Home and Sleep buttons at the same time for 10 seconds, the iPad will then perform a reset. -
I have a new iphone 5 and although I had a little trouble downloading all my apps and music, I did this successfully but now when I connect to my itunes, itunes doesn't see it and also bluetooth doesn't seem to be working.Can Anyone help?
Hey leafxxx,
Thanks for the question, and welcome to Apple Support Communities.
The following resource provides troubleshooting steps if your iPhone is not displayed in iTunes when connected:
Apple - Support - iPhone - iTunes Troubleshooting Assistant
http://www.apple.com/support/iphone/assistant/itunes/
For more detailed instructions, see this article:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Enjoy your new iPhone 5!
Matt M. -
I want to buy the double coins from the game subway surfers! But they told me to contact the itunes support! I don't know why it's not working.. Please help! iPhone 4ss
These are user-to-user forums, you are not talking to Apple here. You can contact iTunes support via this page and ask them why the message is appearing : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then probably Purchases, Billing & Redemption
-
I updated my itunes (latest verion out as of nov/20/2012) and restored my 2nd gen itouch, now my itouch does not work properly (keeps freezing). how do i fix this?
If you restored to factory settings/new iPod and still have the problem that indicates a hardware problem.
Make an appointment at the Genius Bar of an Apple store..
Apple Retail Store - Genius Bar
Maybe you are looking for
-
win764bit downloaded 0ffice 2013 proplus trial burned cd / installed with no error message open any office 2013 application / message - please wait while we load sign in - does not complete / message - word has stopped working - problem - close - not
-
How to read file header/open filein binary mode
i am using FileConnenction API to read from a file. how can i open a file in binary mode so that i can read file header. In other words i want to open a file in binary mode.
-
Nokia N95 8G Bluetooth sound levels
I am hoping someone out there can help me with a small problem with my bluetooth headset and phone. I have a Jabra BT250 headset which i used to have paired with my old N73 and the sound levels on it were very good but now having it paired with my N9
-
How does this SAVE View works in WAD ?
Experts, Before putting this question, i did search for this isssue but couldnt find the correct answer. when i run the query in portal i get the correct report. but when i right click on any of the charastractis, i could see the drop down list with
-
Flex Data Service : deployment and reusage
I am currently trying out different deployment methods to deploy the flex.war on JBoss. So far the WAR-file itself and any other EAR/WAR that contains the contents of flex.war run properly. However as far as I understood this file is merely a templat