HT1414 I'm not get no sound out of my 4s

I'm not getting no type of sound from my 4s only when it rings that's all no typing no music no picture sound no motification sounds no voice mail sound no power off sound

Never mind - I got it.  It has to do with the Rotation Lock and Mute switches in Settings/General.
How did I figure it out?  Google.

Similar Messages

  • HP HPE H8-1203 I am not getting any sound out to the speakers.

    HP HPE H8-1203 It is running Windows 7 Home Premium 64bit.  I have installed all audio drivers required. The only change is that I started getting bluescreens and could not log into windows so i reinstalled it. I can not find any information telling me where to put jumpers on the audio connector on the mother board to eliminate the front audio connector from being the issue.

    Hi Wild1,
    As I mentioned there isn't a jumper setting for the front audio. I have included a link for the motherboard specifications and a link to your manual page that has some information on replacing some components.
    Motherboard Specs:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03135925&tmp_task=prodinfoCategory&cc=us&dlc=en...
    Manual Page:
    http://h10025.www1.hp.com/ewfrf/wc/manualCategory?cc=us&dlc=en&lang=en&lc=en&product=5231356&
    Thank you,
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • I can not get any sounds out of my Macbook Air

    - Basically because it seems like there are no internal speakers when I search in 'sounds'. Anyone, please?

    Sounds like either the internal speaker volume is muted or the micro switch inside the headphone jack is stuck and the computer thinks something is still plugged in.
    1. Check the sound preferences and see if you can select and/or unmute the internal speakers?
    2. If not, try plugging in gently jiggling and then unplugging the headphones to see if you can unstick the micro switch?
    3. If not, contact your local AASP and make a service appointment.

  • In logic Pro, when I open up an audio track and load an audio file, there is no sound. I will finally get a sound out of one of the audio tracks after opening at least 5 of them alternately. Is anyone familiar with this kind of bug? It's really frustratin

    In logic Pro, when I open up an audio track or software track and load an audio file/loop or software file loop, there is no sound. I will finally get a sound out of one of the audio or software tracks after opening at least 5 of them alternately. Is anyone familiar with this kind of bug? It's really frustrating as this takes much time to complete work.
    os x, Mac OS X (10.6)

    I'm not sure I follow your words Fuzzynormal. You've helped by offering the insight that my issue in Logic Pro 9 is not a bug but a feature. But fell short of enlightenment by being a judge of character and of how one should interact in this forum. You insinuate that I haven't tried to solve the issue on my own when in fact I have. These forums are always my last resort. You further suggest that I am complaining. This is not a complaint. It is a genuine issue that I cannot figure out. Then you think that Brazeca is holding my hand and being a nice guy. Brazeca is helping people like me who might not be as adept at using Logic Pro as probably you are.This community forum was established to raise questions, answers and dicussion to help Apple's customers better undertand their operating systems and related issues. You are doing a disservice by not contributing positively and by trying to make this forum what you want it to be. You may have all the time in the world to try figuring out stuff but we are not all like you. We all have different schedules and different levels of understanding. And that is what this forum is for - to help people move forward. If you can't contribute positively then keep silent. And by the way, you say to "read the words that are printed down to explain to you how that works" what words are you talking about? Why don't you be of some help instead of trying to own this forum. 

  • I getting no sound out of the USB connection in my car from my new iPod Classic. Has anyone encountered this problem?

    I getting no sound out of the USB connection in my cars from my new iPod classic. The song name artist display on the console in the car but no audio. This is happening on 2 cars - Nissan Rogue and Acura TL. My older iPod classic played fine in these cars. Has anyone encountered this issue?  

    I have a similar problem with a 160 gb Classic, about 5 years old - if I move the plug one channel may be heard and tehn the other. The interface works but not the sound. Different ipods eg nano work perfectly.
    The two cars I have are an Audi and a BMW and both have manufacturer connectors

  • I am not getting any sound on my ipod touch

    I am not getting any sound at all on my ipod. I am not sure what happened to it. I tried a game feature and there is no sound and it does not seem that my ipod is on mute. I tried Pandora which I usually listen to everyday and there is no sound. What do I do?

    I would first try doing a Restart
    http://support.apple.com/kb/ht1430
    If that does not help, try a different set of headphones to rule out bad headphones as the cause.

  • I have a problem with the external sound of my ipod, when I take the headphones the music keeps playing and the ipod recognizes still have a headset connected. how do I get external sound out?

    I have a problem with the external sound of my iPod, when I take the headphones the music keeps playing and the ipod recognizes still have a headset connected. how do I get external sound out?

    - Try insering and removing the headphone plug a dozen times or so.
    - Try cleaning out the headphone jack in the iPod.
    - Resett he iPod. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restoe to factory defaults/new iPod
    If yu still have the problem that indicates a hardware problem, likely a bad headphone jack. Yu can make an appointment at the Genius Bar of an Apple store to confirm.
    If not underwarranty Apple will only exchange your iPod for a refurbished one for:
    Apple - Support - iPod - Repair pricing
    A third-party place like the following is less expensive. Here is one. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

  • Trouble getting any sound out of new Mac Pro

    I recently bought a new Mac Pro and I've been having trouble getting any sound out of the internal speaker. I believe it thinks that there are always headphones plugged in even when there aren't. I don't get a startup sound and it doesn't make the "volume change quack" when I change the volume. The choices under the Sound panel for Output are: "Headphones", "Line Out", and "Digital Out" even if no headphones are plugged in. Sometimes I can get sound out of the computer if I jiggle around a headphone plug in the jack but as soon as I reboot or the machine wakes up from sleep the sound goes away.
    I'm guessing that it's probably a bad headphone jack but before I inevitably have to lug the 60 pound machine to the Genius Bar I thought I'd ask to see if anyone else has had similar issues and if there might be a quick fix to do myself.
    Thanks for any tips or help.

    Thank you but that unfortunately did not fix it. I'm sure I need to take it in.

  • Running snow leopard on MBP and am not getting an sound alerts for Mail or Calendar; Have checked all setting in sound in the system preferences

    Running snow leopard on MBP and am not getting an sound alerts for Mail or Calendar; Have checked all setting in sound in the system preferences

    Hi..
    For Mail, from your Mail menu bar (top of your screen) click Mail > Preferences then select the General tab.
    Click the pop up menu to the right of New messages sound to make a selection.

  • I Get No Sound Out of My iPad - How Can I Get Sound?

    I can't get any sound out of my iPad.The lock sounds switch on the side of the iPad is set to provide sounds.  The volume switch next to the lock sounds switch is set to full volume.  I have a number of apps that are much better if sound is enabled.  There is no sound for these apps.  The Options in the apps are all set to "sound."  I have re-booted my iPad.  Still no sound.  I have gone into Settings/Sounds.  I don't see anything in there that involves the master sound system for the entire iPad - only sound setting for individual apps.
    I have several manuals.  I have combed through them - nothing.  It's like how to turn the master sound on or off for the iPad is some kind of huge secret that no one wants me to find out about.
    Let's fool 'em, hey?  Tell me how to get sound out of my iPad.  I will be forever grateful.

    Never mind - I got it.  It has to do with the Rotation Lock and Mute switches in Settings/General.
    How did I figure it out?  Google.

  • How can I get more sound out of the Mini?

    How can I get more sound out of theMini?

    Via the headphone jack. That also provides a digitial audio out too. See:
    http://support.apple.com/kb/HT5539

  • Not getting enough performance out of Msi GT60 0NC

    Hello there guys! Since I've got my laptop I have been getting the feeling that I am not getting enough power out of my toy. I dont know if its me who have too big expectations about this laptop or it really should be performing better?:( I have done hours of research regarding drivers, graphic setup and not at least overclocking which seems to raise the performance quite a bit but it easily gets unstable. I am using Msi's preinstalled drivers as it seems like they give the best performance so far. I have also installed the modded Firmware from https://forum-en.msi.com/index.php?topic=162629.0 which works better than the original one from Msi. But still, i hear a lot of people playing demanding games on ultra with fps around 50-60. In bf3 I get around 40-60 on High with shadow on medium and post processing off, anti-aliasing off. Turbo is on + overclock. The performance in Gw2 is even worse.
    So here is my question: am I expecting too much from the laptop or can I do something to improve it and make it run like a charm? Another question would be if it is possible to change powervoltage to get a higher overclock?
    I would very much like to hear from u guys how your msi gt60 is performing:)
    Best regards, Mathias Kanstrup

    Quote from: zipper.sippola on 18-September-13, 17:57:49
    Same here, Gt70 0NE + 680M; overclocking GPU core causes clockdowns so gains are minimal. Overclocking memory is successful upto about 2500MHz but gains are small as the memory isn't the restricting factor in preformance - or the effect is just minuscule. So mostly 2 to 8 % in benchmarks, max.
    With extreme air cooling and a modified VBios, it's possible to get up to around 15%......I know this first hand.
    I just don't care to do it since there's little point in pushing the hardware that hard regularly. Yes, it's great for bragging rights, but it's not useful for long term use unfortunately.
    Overclocking the memory in the GTX675M might help a bit more than in the 680M. I'm not sure, I haven't really followed up on the other cards.

  • I am not getting any sound input on my microphone. There is no microphone input on my new macbook pro, so I am using my old one. Is this a problem with the new operating system? Did they simply remove any microphone software?

    I am not getting any sound input on my microphone. There is no microphone input on my new macbook pro, so I am using my old one. Is this a problem with the new operating system? Did they simply remove any microphone software?

    Check System Preferences > Sound > Output
    Make sure the correct device is selected.

  • I am getting no sound out of my laptop, how do i fix it?

    i am getting no sound out of my hp pavilion Dv7 with dr.dre beats audio and it is running windows 7

    Hi,
    Can you post back with the full Model No. and Product No. of of your dv7 series notebook - see Here for a guide on locating this information.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Help, please! i can not get the sound to work on my pc

    i can not get the sound to work on my pc

    Try opening the device manager and remove your sound hardware and then rediscover.  This works often.  Let me know how it goes.
    iGirlTech

Maybe you are looking for

  • Time Machine on Snow Leopard just doesn't work.

    So I've had huge nightmares over the past few days over Time Machine. So I've always been a big proponent of Time Machine. I always tell everyone that you NEED a backup solution, and while Time Machine may not be the be all and end all, it's a great

  • Adobe Reader 10: How to print a PDF ignoring the red characters?

    Adobe Reader 10: I want to print a PDF ignoring the red characters. I am a school teacher.  I would like to print PDF answer key files (answers in red) without the answers for the students to work on.  How can I suppress the red characters during pri

  • Date Format (Need result in date format)

    Dear , i have worked on this query which produce result in error, infact i need result in date format and this format 'MON-YY'. : select to_date( EFFECTIVE_DATE,'MON-YY' ) as MON_YY FROM GL_JE_LINES but now EFFECTIVE_DATE is like this format '12/31/2

  • Help! ORA-01031: insufficient privileges during "startup migrate" 8i to 9i

    Hello there, I am following the Oracle 9i upgrade checklist Doc ID: 159657.1 to upgrade from 8.1.7.3 to 9.2.0.4. In step 31, after setting the environment to new ORACLE_HOME, I am trying to start the 9.2.0.4 instance in migrate mode. This is the sequ

  • Joining 2 Statements with Numeric Data

    Hi All, I have 2 statements that produce similar data with numerica data that needs to be added together. Union or Union All doesn't work here. How can I do this? Table 1 Area       Total SHERIDAN    50 GILLETTE    150 SOMEAREA    60combine with Tabl