HT1414 I'm trying to restore my ipod touch but the restore box doesn't come up on itunes. Nothing appears for me to click restore. Please help
My Ipod touch is disabled but I know how to put it in dfu mode(I think that's correct)...but when I log into itunes the restore box does not appear.
What am I doing wrong? How do I restore my ipod touch on itunes when the restore box does not come up?
Try Recovery Mode and restore via iTunes.
iOS: Wrong passcode results in red disabled screen
If not successful, try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Next would be to try on another computer to help determine if you have an iPod or computer problem.
Similar Messages
-
Someone please help
Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. -
after a licensing failure message, I tried to reinstall CS3 design standard but the error "Component Install Failed" occurred and I still am unable to use Photoshop or InDesign Please Help!
J3liu1 I would recommend reviewing the installation log files for the specific error message which you are facing. You can find details on how to locate an interpret your installation log files at Troubleshoot installation with install logs | CS3, CS4. You are welcome to post any specific errors you discover to this discussion.
-
I tried to reset my ipod touch but the apple logo wont go away and isnt responding to my computer HELP!!
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Nothing is working on my 3rd gen ipod touch but the home button. It's not sliding or anything. I've tried resetting and restoring it. Did not work
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I restored my ipod touch however the apps will not sync. I tried to re-download but I changed my apple id as my old id is no longer a valid email address. Any ideas out there please?
It might be logical to someone, but not to me. I agree it's a pain.
How did you change your Apple ID? Creating a new one is not what you want to do, but if you changed the ID associated with your purchases then that might have worked. You would need to sign in with the Apple ID on both your iPod Touch as well as in iTunes. I'm not sure how you changed it but clearly they need to match.
If it's just your password that is not getting recognized reset it here: http://iforgot.apple.com/
It will send an email confirmation to the email address associated with that Apple ID. The email address you elect to use might not look anything like your Apple ID. If you don't appear to get an email check your spam filter. -
I tried to restore my ipod touch 2nd generation and now it won't sync to itunes. On the screen is the USB end of the cord and the iTunes logo over it.
I have turned it off and on, held the off button down and the select button down but it still comes up with that picture on the screen. Have I broken it?
Please help.
MimiIt means the device is in recovery mode. You'll need to reconnect it to iTunes and restore it again.
You may need to connect it in recovery mode manually using the instructions in this Apple support document.
iOS: Unable to update or restore
B-rock -
Ok i recently tried to restore my ipod touch but when i plug it in it says your ipod needs to be restored. but when i try to restore it downloads the software and while its downloading it pops up a message saying your ipod needs to be restored. when the download is finished it doesnt restore or do anything and it stays stuck on the plug your ipod into itunes screen somebody please help me.
Maybe:
Restore loop (being prompted to restore again after a restore successfully completes)
Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
Next try placing in DFU mode and then restoring.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Then try restoring on another computer.
Last, make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
I tried to restore my ipod touch but it says it could not be and than an unknown error occured (3194) please help me!!
Fix Error 3194 from iTunes during iPhone restore
iPhone Error 3194 - How to Fix iTunes Error 3194?
iTunes: Specific update-and-restore error messages and advanced troubleshooting -
I forgot my passcode and tried restoring my ipod touch, but it's not working. What should I do?
I forgot my passcode and tried restoring my ipod touch, but it's not working. What should I do?
Did you place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
I have just tried to update my ipod touch and the update failed but it has locked my ipod. All I get is a picture of the itunes logo and the usb lead. I am unable to get the ipod to move and I don't know what to do. I think I should be recompenced by Apple if I have to pay to get it fixed!
The logo is saying connect it to your computer with iTunes installed on the computer. I assume when yo do this that the iPod is not seen in iTunes. to make iTunes appear try:
- Resetting the iPod:
Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Place the iPod in recovery mode. See:
iPhone and iPod touch: Unable to update or restore
- Place the iPod in DFU mode:
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
If the iPod appears in iTunes restore the iPOd. If not I would make an appointment at the Genius Bar of an Apple store. -
Please help! I am trying to get at my iPod (2nd_Generation) from a new computer. I have iTunes loaded but the Setup Assistant doesn't come up to allow me to access my iPod Shuffle. When using iPod in the 1st computer (which I no longer have), the iTunes Setup Assistant comes up but not on this 2nd setup on a new computer? The manual doesn't clarify how to do this. Thanks.
Try to connect in recovery mode, explained in this article:
iOS: Unable to update or restore
Before that, back up your device, explained here:
iOS: Back up and restore your iOS device with iCloud or iTunes
How to back up your data and set up as a new device
You can check your warranty status here:
https://selfsolve.apple.com/agreementWarrantyDynamic.do -
Im trying to restore my ipod touch but every time i hit the restore button it tells me to make sure im connected to the internet and i am i dont know what to do please help
I'd start with the following document:
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server -
I am trying to update my iPod touch to the new iOS, but the error message "An error has occurred while backing up this iPod (0xE800067)" and asks me if I want to continue (which will "result in the loss of all contents on this iPod"); what is the problem?
Maybe:
iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting
Also see:
iOS: Troubleshooting backup issues in iTunes -
I keep trying to sync my ipod touch, but it says "the ipod cannot be synced. an unknown error has occurred." What should I do so I can music on my ipod?
Try resetting the iPod. Nothing will be lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
Maybe you are looking for
-
Photoshop crashed when i try to print.
I download Os X Maverick to my mac and after that I can´t print from photoshop. Every time I open "print" and try to change print options photoshop crashes. I can use "Print one copy" options but i can't change paper size or anything. I download prin
-
How to create child part from Parent Item - BLOW UP Master - Automatically
Hi to All, Have any one defined this process? To create child part from Parent Item - BLOW UP Master - Automatically ie. we receive FG from customer which we need to blow up to its child part. In that case, FG should be consumed & child parts should
-
I have an application that uses JTree I create the Jtree but I want to expand to see and select a node. I have the object of the node and the TreePath but I can't expand the tree using expandPath(), makeVisible(), scrollPathToVisible(path), etc. It s
-
OS X 10.9.1 itunes 11.1 and a an iphone 5s. Nothing recongizes my iphone on computer. I have shut everything down and restarted it (comp and phone) and I can't set up my new device. I am SUPER frusterated and just want to put some music on my phone.
-
Hi, To deploy OSB Code to diff environment(dev-test-prod). 1. Can we deploy directly from OSB Console , like we have an option in SOA Enterprise Manager ? 2. If only scripts, can any one provide sample scripts WLST/Ant ? Thanks