HT1414 ipad frozen on itunes logo after ios 7 install

I have an iphone 3g and an ipad2.  I have just installed ios 7 on my ipad and the screen is stuck in the itune/usb port mode.  I have no other computer with itunes to plug the ipad into in order to recover the install.  What should I do now?

Force iPad into Recovery Mode. Follow step 1 to 5 very closely.
http://support.apple.com/kb/HT1808
Note: You will need a computer to recover your iPad

Similar Messages

  • Ipad frozen with itunes logo. reset did not work. reinstall itunes on win xp did not work

    ipad frozen with itunes logo displayed. Tried reset both ways. reinstalled itunes on Win XP all without success. Any hint?
    Thanks

    Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds, after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • HT1414 ipad 2 showing itunes logo

    when i was updating new app from itunes, my ipad freezed and shows itunes  logo indicated with wire.i tried to restore but itunes didnt recognizing the device.please help me out.my ios verson is 7.1

    Hello siva sai srinath,
    The following article provdies some useful troubleshooting steps that can help get your iPhone to reappear in iTunes.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Cheers,
    Allen

  • HT1414 Ipad stuck with Itunes logo and USB cable picture ??

    Hello to all,
    My ipad is stuck with the iTunes logo and a picture of a USB cable with an arrow.Itunes is not recognizing my ipad, How do I get past this?

    Not sure what the Script is in the previous reply, but perhaps it referred to the following kb's
    http://support.apple.com/kb/TS1538
    http://support.apple.com/kb/TS3281 ( note the link on the bottom on "restore" , use it if necessary).
    You can also do a search online, or on this forum,  on "dfu mode" if the above doesn't work. 

  • My iPad is frozen with iTunes logo, arrow pointing to it, lock symbol and bar running to power inlet point. How do I get out of this?

    My iPad is frozen with iTunes logo, arrow pointing to it, lock symbol and image of bar running to power inlet point. How do I get out of this?

    1)  Connect to iTunes on the computer you usually Sync with and Restore
    http://support.apple.com/kb/HT1414
    2)  If necessary Place the Device into Recovery mode...
    http://support.apple.com/kb/ht4097
    Note on Recovery Mode.
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps...
    Once you have Recovered your Device...
    Re-Sync your Content or Restore from the most Recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766
    Make sure you have the Latest Version of iTunes (v11) Installed on your computer
    iTunes free download from www.itunes.com/download

  • How can i get rid of the iTunes logo after updating my iPhone 4 to the iOS 6

    How can I get rid of the iTunes logo after updating my iPhone to iOS 6

    Absolute garbage.
    This abysmal excuse "Always have been built in apps" is irrelevant. NOTHING should be tied to the OS of even
    a phone so tightly that you can't get rid of it. NONE of the apple crap apps do I use, but they use space on MY phone.
    I want the **** things gone.

  • NEW IPAD 2 STUCKED ITUNES LOGO/ RECOVERY/RESTORE MODE.HELP!

    Just bought Ipad2 the 2 days ago. now it's stucked to itunes logo after an update. at first it says in recovery/restore mode.now can't detect by itunes.need help pls.

    With you iPad connected to your computer via USB, open iTunes, then press and hold BOTH the power and home buttons at the SAME time until your iPad begins to restore. 

  • Tried updating software but now frozen with itunes logo and usb cable picture on screen help

    Tried updating ipod software, now frozen with itunes logo and usb cable picture on the screen. Computer will not reconise it

    - If ou can turn the iPod off, then see if manually placing the iPod in Recovery mode  will allow a restore. Next try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If it always remains on let the battery fully drain. After charging for at least an hour try a rest and restore.

  • Siri won't launch on new ipad after iOS 6 install

    I can't get Siri to launch from home button after iOS 6 install on the new iPad with Siri turned on in settings menu. Any Ideas?

    Not sure, did you hold down the home button? That's how to get Siri to pop up? And your lucky, iOS 6 won't even install on my iPad 3, any suggestions?

  • HT1296 iPad stuck on Apple logo after trying to reset, how do I fix

    iPad stuck on Apple logo after resetting how do I fix?

    Hi..
    Follow the instructions here >  Apple - Support - iPad - iPad Troubleshooting Assistant

  • My mini ipad shows the itunes logo and picture of charger on screen

    My mini ipad shows the itunes logo and picture of charger on screen

    You are in Recovery Mode. Follow step 1 to 6 closely to recover your iPad.
    http://support.apple.com/kb/HT1808
    Note: You need to be patient and repeat the above many times to recover your iPad

  • After iOS 5 install on iPhone 4 my "other" category in iTunes is huge.

    After iOS 5 install on iPhone 4 my "other" category in iTunes is huge. I can't find any clues as to why. Anyone else have this issue or any clues? I now only have 1gb left whereas before iOS5 I had 9 it's a bit strange. This isn't a complaint btw, just trying to problem solve!
    Gracias.

    I have noticed the same thing! Any suggestions???  I also notice that when I uncheck the boxes for not including music videos and voice memos the size of the music folder increases, and it does it so much so that I exceed the space on my phone.

  • HT4623 during update to IOS7 iphone frozen with itunes logo shown with cable?

    during update to IOS7 iphone frozen with itunes logo shown with cable?

    Your iPhone has dropped into recovery mode. You'll need to restore it:
    http://support.apple.com/kb/HT1808
    Regards.

  • HT6058 Iphone5 frozen on iTunes logo whilst updating latest io7!! HELP

    My iphone5 has frozen on 'iTunes  logo with cable' whilst updating latest version ios7? If I take charge cable out the phone goes off & won't switch on! Please help!

    STOP SCREAMING AT US!
    We are fellow users and typing in all CAPS is just rude and unnecessary.
    Most will simply ignore posts typed in all caps.

  • HT1430 will i lose anything off my iphone4 by resetting it when stuck on itunes logo after trying to update?

    will anything in my iphone4 be lost if i reset or restore wen stuck on itunes logo after trying to update? concerned about losing contacts and pictures because ws not backed up by icloud..thank u for taking the time to assist.

    Open iTunes on computer, connect iPhone to computer, hold both home and power buttons for about 20 seconds until iTunes recognizes iPhone in Recovery Mode. Click the Restore button of iTunes. If still problem, try
    DFU Mode Restore: Open iTunes on computer, connect iPhone to computer. Hold both Home and Power Button for exactly 10 seconds, then release the Power button, keep holding the Home button until iTunes recognizes the iPhone in Recovery Mode, the iPhone screen should be black, blank. Click the Restore buttons of iTunes.
    iTunes needs to be up to date version 10.7, if you need this, click the iTunes tab at the top of this window screen.

Maybe you are looking for

  • BAM HA and Data Consistency

    Hi, I need to preserve consistency of data in BAM, meaning BAM itself does not require HA, but I need to guaranty there is no loss of data (even if BAM server is down). I have a single BAM server and a cluster of WLS where the JMS queues/topics are l

  • Exchange 2013 users cant connect to public folders on Exchange 2010

    Hi I recently migrated all users from exchange 2010 to 2013 and now nobody can connect to public folders.  Ive read several forums with similar issue, but none of the solutions have fixed my problem. My configuration on exchange 2013: ExternalClientA

  • Cost Center in the costing sheet

    Hello All, We have set up the costing sheet with the material overhead flowing to a cost center 99XX through cost element 8XXXXX (in the "credit" view of the costing sheet) for all production orders. Now, there is a requirement whereby the material o

  • How to customize aniview of srm 4.0 to suitmy needs

    Please help me with this issue- how to customize an iview of srm 4.0 to suitmy needs? in which  language - abap/web dynpro java has the iviewsof srm 4.0 been develpoed?

  • Oracle Database & Zones

    We are moving our Oracle Database from Solaris 10 to Solaris 11.2. Is there advantage and disadvantages  of running the Database in Kernel Zone?