HT1414 Ipad stuck with Itunes logo and USB cable picture ??

Hello to all,
My ipad is stuck with the iTunes logo and a picture of a USB cable with an arrow.Itunes is not recognizing my ipad, How do I get past this?

Not sure what the Script is in the previous reply, but perhaps it referred to the following kb's
http://support.apple.com/kb/TS1538
http://support.apple.com/kb/TS3281 ( note the link on the bottom on "restore" , use it if necessary).
You can also do a search online, or on this forum,  on "dfu mode" if the above doesn't work. 

Similar Messages

  • Tried updating software but now frozen with itunes logo and usb cable picture on screen help

    Tried updating ipod software, now frozen with itunes logo and usb cable picture on the screen. Computer will not reconise it

    - If ou can turn the iPod off, then see if manually placing the iPod in Recovery mode  will allow a restore. Next try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If it always remains on let the battery fully drain. After charging for at least an hour try a rest and restore.

  • Iphone 5 screen is stuck on itunes logo and USB cable?

    iPhone 5 screen is stuck on iTunes logo and USB cable. Reset does not work.

    Place your device in recovery mode as explained here:
    iOS: Unable to update or restore

  • My iPad has the iTunes logo and USB cable on the screen. Can I still back up my music and photos?

    My iPad has the Itunes logo and USB cable on screen. Can I still back up my files?

    If you haven't already done so, its unlikely.
    You can try holding both the home and power buttons at the same time until the apple logo appears on the screen, then let go.

  • Tried synching iphone for the first time on new PC and got error followed by itunes logo and USB cable picture. No idea what went wrong and now phone is in this screen locked. please help!

    tried synching iphone for the first time on new PC and got error followed by itunes logo and USB cable picture. No idea what went wrong and now phone is in this screen locked. please help!

    I tried connecting to iTunes and neither the PC nor iTunes recognizes the device. I went through all the troubleshooting on the Apple website for this issue and nothing worked. I've reinstalled iTunes, the driver, everything and still can't get either the PC or iTunes to recognize the phone.  I don't know what else to do :-( any help or suggestions are highly appreciated!
    I would hate to have lost all my info, especially contacts and calendar items since I have no idea what was backed up prior to the phone getting locked on this screen. I've been told that my only option is to go to the phone carrier and they will reset it for me, but that means it will wipe out all the info.
    I hope someone has a fix other than that one.

  • Totally frozen with itunes logo and usb CABLE

    I have the itunes logo and the usb cable logo frozen on the ipod screen.
    What gives?
    I've tried resetting per the reset page and it has not worked..
    Any suggestions?
    Thanks

    What happens when you connect the iPod to your computer and try to restore via iTunes? The screen is telling your to connect the iPod to your computer with the USB cable and restore via iTunes.

  • Iphone 3GS frozen on screen with itunes logo and USB cable

    hey
    my iphone 3GS has frozen on the screen with the itunes logo and a USB cable this happened right after trying to update it , which for some reason failed. i have tried restoring it and downloading the new itunes any help would be brilliant.
    also anyone else find itunes and windows 7 dont work ?
    thanks.

    the same thing has happened to me!
    today 25th feb @ approx 10pm (melbourne time)
    itunes goes "hey u gotta update ur iphone" so i do
    and then it takes ages and ages, and then its like backing up iphone, and then it goes bump bump error, some ****, and then i go mmkay, and then the phone has frozen on this image the same thing the guy above has said!
    *** am i ment to do, restarting dont help!
    im on vista 64bit.

  • HT201412 my Ipad screen is stuck with Itunes logo and wont repsond

    my Ipad screen is stuck with Itunes logo and wont repsond

    Connect to iTunes on the computer you usually Sync with and “ Restore “...
    http://support.apple.com/kb/HT1414
    If necessary Place the Device into Recovery mode...
    http://support.apple.com/kb/ht4097
    Note on Recovery Mode.
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps...

  • Stuck at iTunes Logo and USB

    I tried on two Windows Computers to install the new iTunes update on my iPad. Now I am stuck at the iTunes Logo and USB cable graphic.
    I tried all the standard reboot stuff. Battery is fully charged. Everything seemed to go well until the very last moment.

    I am sorry.
    I did confuse the iTunes part. I have the latest version of iTunes on both my Windows Laptop and HP PC.
    Actually that was the problem.
    I successfully updated the new Apple iOS to my iPhone and iPad2. I successfully downloaded (backed-up) my data from my iPhone and iPad to my Laptop.
    I successfully updated my iPhone with the new iTunes (version 11) I believe.
    THIS IS WHEN THE TROUBLE STARTED.
    When I tried to update iTunes on the iPad --- all h**** broke loose. After about 80 tries with just the iTunes Logo and USB graphic showing up on the iPad (including two DSU sessions), I still get a 3014 error.
    I have disabled all of my security on the Windows PC (imagine how I feel about that!!!!) and still to no avail. I have tried about 80 times in the last 2 days (no exageration) trying all methods, scouring the NET and Apple Help and still I cannot get past Error 3014.
    I was on the Apple Care with two Apple "experts" on the telephone (including a Manager) for over an hour and they walked me through (the same stuff I had tried about 60 times). I still get Error 3014.
    I HAVE NOT PROBLEMS with my ASUS Transformer TF300T to access its cloud, its updates, its store and its apps. If Google can do it (work with my computers) why cannot Apple?
    Seeing "Error 3014" in my iTunes is so OPAQUE!! My god, I am a sophisticated user ... what is a Newbie supposed to think?
    Apple is still in the world of Nerds and Geeks (no offence, I am a Geek too!!). It needs to recognize and by-pass these opaque traps and work with real people who are now the bulk of Apple users.
    The bottom line is this... all instructions, help files, responses to my pleas for help all say the same thing: iTunes SHOULD be able to restore your iPad. NONE mention any solutions to by-pass Error 3014 in any simple, practical manner. How is a Newbie supposed to disable his/her firewalls, anti-virus, etc? Too complicated.
    James Dean Waryk
    <Personal Information Edited by Host>

  • After I upgraded my iPad 2 to 6.1.3 I now have a itunes logo and USB cable showing.  What has happened?

    After I upgraded my iPad 2 to 6.1.3 I now have a itunes logo and USB cable showing.  What has happened?  What do I do to get by this.  I can not shut the iPad down at all.

    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • HT201412 it shows itunes logo and usb cable with arrow after that it switch off itself

    iPAD shows itunes logo and usb cable with arrow after that it switch off itself

    If the Restore doesn't work, force your iPad into Recovery Mode:
    1. Turn off iPad
    2. Connect USB cable to computer; leave the other end alone
    3. Press and hold the Home button down and connect the docking end of cable to iPad
    4. Continue holding the Home button until you see the "Connect To iTune" screen
    5. Release the Home button
    6. Open iTune
    7. You should see "iTunes has detected an iPad in recovery mode"
    8. Use iTune to restore iPad
    Note: You need to be patient and repeat the above many times to recover your iPad

  • While opening my iphone 4 it shows itunes logo and usb cable and stucks there, while opening my iphone 4 it shows itunes logo and usb cable and stucks there

    while opening my iphone 4 it shows itunes logo and usb cable and stucks there, while opening my iphone 4 it shows itunes logo and usb cable and stucks there

    It's in recovery mode. Plug it into your computer running iTunes and restore it.

  • Software update failure, now phone frozen. Now screen only showing itunes logo and USB Cable on screen. Have I lost my backup?

    I just tried updating the most recent software on my 3GS (on my Mac) but it said the updated on my phone failed. Now my phone is frozen and only showing the itunes logo and USB cable. When I connect to the USB lead, its says: iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes.
    Have I lost all the data on my phone?
    What should I do?
    Help!
    M

    The iTunes logo and cable indicates that your iPad has gone into recovery mode : http://support.apple.com/kb/ht1808
    For the 3004 error code does the troubleshooting for it on the page that you posted from not help ?

  • My iphone froze up when i tryed up dating my 3gs and the only thing comes up on my screen is the itune logo and usb cable how do i fix the problm

    i was trying  to update my iphone 3gs to ios 6 and then on my iphone screen comes up with a itune logo and usb cable i tryed turning it of conecting it back to the computer and notting happens what do i do how do i fix this problem

    mine has done the same thing. itunes isnt even recognizing that my phone is plugged in.

  • HT4623 upgraded to ios7 iphone now displays itunes logo and usb cable will not restore in itunes, wil not restart

    upgraded to ios7 iphone now displays itunes logo and usb cable will not restore, will not restart

    Hi there emynona,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    -Griff W.

Maybe you are looking for

  • Problem with Usage Dependencies

    Hello, we have a Web Dynpro Application (Migrating from 6.40 to 7.00) which uses Collaboration API: kmc.util.core_api.jar, coll.shared.roomobject_api.jar, coll.shared.types_api.jar and coll.shared.extension_api.jar. I found in SLD the SC  KMC COLLABO

  • Unknown indicator = severe battery drain?

    I have a 6220 Classic and recently a new indicator has appeared in the top right corner of the homescreen (alongside battery strength indicator). At the same time I'm noticing that my battery is not holding any charge, as in I have to charge it daily

  • RETURNING CLAUSE ERROR

    Hi All, I was trying to use RETURNING CLAUSE into pl/sql process but it gives error as :- "1 error has occurred * ORA-06550: line 12, column 13: PL/SQL: ORA-00933: SQL command not properly ended ORA-06550: line 6, column 3: PL/SQL: SQL Statement igno

  • Link between structure indicator and labellig system (PM-FL)

    Hello, I'm facing a problem to associate one of my alternative label with a precise structure indicator. In our system (R/3 4.6c), we have activated the alternative system in order to use a 40-char-long label for our functional locations. We also cre

  • Good Siebel Opening in a CMM level 5 co

    1. Siebel EAI Developer • 4-6 years experience in Siebel EAI development, • hands on expertise with inbound and outbound web services, middleware, transport protocols, scripting, configuration, integration objects, VBC's, EBC's, having been through e