HT1414 ipad2 screen went blank whilst using, will not switch on now.
ipad2 screen went blank whilst using, will not switch on now.
Try this .....
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Similar Messages
-
Ipad was dropped onto carpeting and the screen just went blank. It will not show turn off slide, nor will it display the apple icon. Pusing both home and on/off button together also does nothing. The screen barely displays any light when the home button is pushed. I am able to sync it but the screen is not displaying anything.
A few iPad users have been successful in "reviving" an iPad after a drop. Turn the iPad over and give it a HARD SLAP in the back. May take several slaps.
Frozen or unresponsive iPad
Resolve these most common issues:
• Display remains black or blank
• Touch screen not responding
• Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Cheers, Tom -
Hello, I received a message to set my icloud and the screen went blank, the computer will reboot and now asks me for a PIN code unknown to me, what should I do?
It has been remotely locked by the owner, or by someone who knows the owner's Apple ID and password.
-
My App Store shows 3 updates but when I go to it the screen is blank. It will not give me the option to update all or one at a time, it doesn't show the apps at all.
Many people are having this problem for the last couple of days. This is a problem that Apple has to fix. If you look around the forum, you will see many, many discusssions about this and they have been going on for a few days.
According to Fly150 in another discussion, this is a workaround - for the time being.
If you want to update the Apps while waiting for Apple to fix Updates:
1. Go to App Store
2. Select Purchased
3. Select All
4. Scroll down to find the Apps showing update
5. Select update on the Apps
This should update the Apps and get rid of the update count in App Store. -
The Ipad Air was working fine - then it went blank. It will not turn on again. It was fully charged It is less than 2 months old.
A reset may help. Tap and hold the Home button and the On/Off buttons for approximately 15-20 seconds, until the Apple logo reappears. When the logo appears, release both buttons.
No content is affected by this procedure. -
My iPad screen went dark. it will not reset and is not discoverable on iTunes.
my iPad screen went dark. it will not reset and is not discoverable on iTunes?
Make sure it's plugged into power for at least 5 minutes, then try holding down the top power button and home button for 15-30 seconds. You may get it to reboot.
-
My movie playing and screen went blank. I turned it on and rebooted. No help. What do I do?
I was watching amovie on my iPad 2 and the screen went blank. I can not get it back up or back to the opening screen to click on either of the other two movies I downloaded. Advice?
Call your carrier and see if there is an outage in your area... Try re-setting the phone. Go to another location and see if the problem persists. Pay your phone bill. These are all possibilities. Without more information, we're just guessing.
-
I have been having trouble with my iphone 4 for the past day . i tried to update it to 7.0.4 then the screen went blank and it keeps telling me to connect to itunes . I have connected it to 2 computers , using different cords and it doesnt recognize it . It says it is in recovery mode and i need to restore . after clicking restore it says that my iphone cannot be restored . I am very frustrated because i have been online searching for solutions all day and nothing seems to work . As soon as i turn on my phone it goes to the apple logo for about 2 seconds then the connect to itunes screen . SOMEBODY PLEASE HELP ! my phone is my life and i need it back on .
Connect the device to iTunes and restore from the most current backup.
If the issue continues, restore as new. -
I was using my MacBook Pro Mid-2010 and then the screen went blank, I did a hard restart and went to restart again and it won't startup. The white light comes on and then the computer kinda "clicks" off!
Execute the procedures in this support article:
http://support.apple.com/kb/TS1367?viewlocale=en_US
Ciao. -
I have approximately 400 lives in reserve as gifts from friends in Candy Crush, but every time I try to access them, the screen turns blank. It will only let me use the 5 lives you are given every 30 minutes. Updates are up to date. Any suggestions?
Contact the app develed.
-
While using IBOOKS I touched something on the screen and the screen went blank and I can't get back to normal IBOOKS screen. How do?
Try to reset your device:
Device Reset (won't affect settings/data/music/apps/etc)
1. Press and hold (& continue to hold) BOTH the Sleep/Wake button & the Home button.
2. Continue to hold BOTH (ignoring any other messages that may show) until you see the Apple logo on the screen.
3. Release BOTH buttons when you see the Apple logo and allow the device to boot normally. -
I used Cmd +Q to close a programme and the screen went blank and even tho the power cord is attached the macbook is not powering up any ideas
Reset SMC. http://support.apple.com/kb/HT3964
Choose the appropriate method.
Best. -
Resetting my resolution, MY SCREEN WENT BLANK!
I was checking to see what was the highest resolution i can set my monitor to and it would seem to work. when i got to one setting, the screen went blank and the montor it self said something about being out of range. the screen now stays blank and cant get it to come back on to change the setting to something i can see anymore. I have restarted the computer and can see the loading screen but just bfore it goes to the desktop, the screen cuts off again. is there some kind of "safe mode" or way i can get things to work again? right now i cant use the computer at all being i cant see anything
help!!!Hi G F2:
There is a safe-boot mode: hold down the shift-key during startup; this may actually take longer than a normal boot, so don't worry.
If that doesn't work, you could try resetting your PRAM: hold the commandoption+pr keys during boot, and wait for three chimes (to be safe). Then let go and let it boot. This should restore to the default screen resolution.
By the way, I've done the same thing, and sometimes the only way to get it back is to connect a different monitor that has a higher resolution than what you're testing. Sometimes, using the up-arrow key will change the resolution back to a previous (lower) selection.
Good luck!
Andrew -
Screen went blank, won't shut off, screen as a timer in middle, chirps every once in while
I was using my iPod touch when the screen went blank, it just glows and has a timer clock in the center. It chirps every once in a while. I have it hooked up to the charger to see if that will bring it back.
you can do 2 things.
1. hold the home button and the power button in for 10-15 sec.
(powerbutton is on the top home button is the button on the botton)
2. hold the power button to boot the ipod up again
1. let the battery fully drain
2. boot it up again while you have it connected to your computer
if it works and you can't boot up you can also let your ipod go to dfu mode:
1. open itunes on your computer
2. connect your ipod to your computer
3. hold the home and powerbutton for 10 sec
4. keep holding the home button
itunes will say now that he find an ipod touch in DFU mode and you an recover you ipod again be aware that you will lose all your data but if you had made a backup of your ipod before than is there no problem. -
Screen went blank on 4s and can't turn back on. Battery is charged.
Screen went blank on 4s. Battery is fully charged. Can not turn on.
Okay, got my phone back from the store I originally bought it at (the Swedish equivalent to Best Buy), and they had tried charging it with an iPhone-charger with no results. However, when they tested with an off-brand charger, it started working again. I wonder why that is.
When I got home, it was on 98% and I plugged it in with my regular charger just to see if I would really need to go out of my way to buy a completely different charger. It charged up to 99%, and I then unplugged it. I will wait and see if the problem re-occurs, but as it looks now, I probably won't be needing to get the battery changed nor book an appointment with the Genius Bar I'll check in here again if that were to happen, to give my review of the Genius Bar!
Thanks for all the help again
Maybe you are looking for
-
The Plus(+) tab for opening a new tab is not working
Even when i right click the bar and click "New Tab" it doesn't open a new tab.
-
Difference between Domain member and standalone server with AD binding
Hi all, Can anyone explain the difference between: A) Setting up a MacOSX server as Windows domain member server using Server Manager; B) Setting up a MacsOSX server as Windows standalone server and joining the Active Directory using Directory Access
-
Legend view on line chart click
Hi, I have to axis x and y on line graph so x axis contains time dimension in hours 4p,8pm or can be date dimensions and and y axis it contains sale values now the point is when ever click on any date on x bar i get value on that of alll y axis line
-
I am trying to print labels and not having any luck . I have windows 7, using Corel Wordperfect 3 on Hp laserjet 1505 and HP 2035.
-
How to use an old backup file to restore iPhone 4s?
Hello everyone and thank you in advance for any help that I may recieve. I synced and backed my iPhone 4s via iTunes and then accidently restored it. I tried using the most recent backup to get everything back how it was right before the accidental