HT1414 iPhone 4S

My wifi is still grayed out having followed all the recommend action. What else can I try?

That's exactly what I followed , step by step, and still the wifi grayed out remains . I should mention that it was working right up to yesterday late evening , then it just went along with the bluetooth
This solved my questionThis helped me

Similar Messages

  • HT1414 iPhone 3G error 1015

    I've been following these steps: http://support.apple.com/kb/HT1414 and been stuck after doing the 3 steps. What should i do? I cannot use my iPhone 3G now. Thanks!
    Error: "The iPhone could not be restored. An unknown error occurred (1015)"
    Thanks!

    The "1015" error generally indicates that the handset has been subjected to jailbreaking, and there's nothing you can do.

  • HT1414 iPhone 4S in recovery mode

    Can I save the photos that are already on my phone when iTunes says my iPhone is in recovery mode?  Is my only option to Restore my phone?

    From recovery mode, yes, your only option is to restore your iPhone ... but ...
    This article, referenced in the HT1414 article you attached above, has a section called "How to restore from a backup" under both the iCloud backup and the iTunes backup section.
    So, hopefully you have backed up everything on your iPhone, and can then recover the backups as explained:
    http://support.apple.com/kb/ht1766

  • HT1414 iPhone 4S and Sony MEX-BT3100U will not pair, I have updated iPhone software to iOS 7.0.4 to no avail.

    So I bought this Sony headunit at the weekend, it pairs with my iPhone 5 via bluetooth without problem. My iPhone 4S will not find it despite following all the steps from Sony and Apple.
    Sony state that it is compatible and that I need to take up the issue with Apple.
    http://www.sony.co.uk/support/en/product/MEX-BT3100U/compatibility
    Anyone resolved this problem?

    Hi amit786898,
    If you haven't already done so, you may want to restart or reset the iPhone:
    iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/HT1430
    Restarting your iOS device
    1. Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider.
    2. After the device has turned off, press and hold the Sleep/Wake button until the Apple logo appears.
    Resetting your device
    If your device stops responding, you can reset it by pressing and holding both the Sleep/Wake and Home buttons for at least ten seconds, until the Apple logo appears.
    If the above does not resolve your issue, the next best step will be to restore your iPhone using a computer with iTunes. Please be sure to backup your iPhone first.
    Choosing an iOS backup method (Should I use iTunes or iCloud to back up my iOS device?)
    http://support.apple.com/kb/HT5262
    iTunes: Restoring iOS software
    http://support.apple.com/kb/HT1414
    Thanks,
    Matt M.

  • HT1414 iphone not recognized in windows or itunes

    iphone not recognized in windows or itunes

    My iPhone 5 was not being recognized by two different computers, windows 7 and windows 8.1.  My wife's iphone 5 had no issues.  I followed all the advice on-line from re-installing iTunes, resetting my phone ( as new and backed up from cloud), device manager troubleshooting, re-install drivers, different cables, different ports.  Oddly enough in the fianl analysis my iPhone only gets recognized when the cable is insert in one way into the phone.  Flip the cable and it goes straight to "unknown device".  Doesn't matter which cable I use, it only works on one side.  My wife's works both ways.  I can't explain it, but there it is.  I put a dot with a permanent marker on the cable to identify which side goes up.

  • HT1414 iphone was restoring and now it is frozen on connect to ipod . how do i reset

    iphone is frozen at connect to itunes screen. please help

    Hi feasenora,
    I understand that your iPhone stopped responding during a restoration process. The following resources may provide a solution:
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    Apple - Support - iPhone - Restore Troubleshooting Assistant
    http://www.apple.com/support/iphone/assistant/restore/
    Thanks,
    Matt M.

  • HT1414 iphone could not be restored an unknown error occurred 23

    pleas help me repair  my ip with  erro iphone could not be restored an unknown error occurred 23

    Try disabling any anti-virus software or firewalls and restore again.  Copied from http://support.apple.com/kb/TS3694:
    Error 20, 21, 23, 26, 28, 29, 34, 37
    These errors typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.

  • HT1414 IPhone 4s Typing by itself

    my Iphone 4S is typing by itself and opening apps and changing pages. I restored it 3 times and it didn't work,even i restored it as a new phone.

    You may. Have. A ghost

  • HT1414 iPhone 3GS unable to restore or update

    I have updated my iPhone 3GS with 4.2 version but its not responding. When i switch on my iphone,it shows to connect to itunes. I have tried connecting to itunes nd clicking Restore and update but it shows the message stating iPhone cannot be restored. Please suggest me what to do. The phone is not even getting turned on.

    Error 13, 14, 35 and 50 (or -50)
    These errors are typically resolved by performing one or more of the steps listed below:
    Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
    Put a USB 2.0 hub between the device and the computer.
    Try a different USB 30-pin dock-connector cable.
    Eliminate third-party security software conflicts.
    There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
    Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
    Try to restore from another known-good computer and network.

  • HT1414 iphone 4 back up and update

    I have updated my iphone 4 without backing up first have I lost all my photos and contacts or are they saved on my computer some where
    Tracey

    That's too bad.
    If the user failed to make a backup before updating, the data is gone.

  • HT1414 iphone 5 apple logo blinking

    my iphone stuck on blinking apple logo

    Hi bobbyousaf,
    If your iPhone isn't responding, you may find the following articles helpful:
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/ts3281
    Regards,
    - Brenden

  • HT1414 Iphone 3G restarts right in the middle of restore so I keep getting unknown error message.

    Hey everyone, I have an old school Iphone 3G, it restarts itself right in the middle of a restoration so I keep getting unknown error message. I don't know why but no matter what usb port I plug it into, the white bar underneat the Apple logo on the iphone will get right close to the end but then like I stated earlier the phone restarts randomly, so it won't let me restore the product because it keeps getting reset by itself.
    please help me

    Thanks for helping out, but I already tried these steps.
    I even tried this on a iMac with similar results. The only difference was that the errorcode was called 2001 instead of 21.
    Today I took the phone to www.iphoneambulancen.dk. A guy (in Aarhus, Denmark) that specializes in iPhone repairs. I figured, that given his occupation he'd seen most errorcdes. Two hours later, he called me back, and told me that he had replaced the battery.
    So, it turns out that a broken battery can cause this behaviour.
    But thanks again

  • HT1414 IPhone hanging on Apple and worked restor aspiration message error number 3194

    IPhone hanging on Apple and worked restor aspiration message error number 3194

    Check this support document http://support.apple.com/kb/TS3694 and click on the specific error message you are receiving for help.

  • HT1414 Iphone 7.0.4 connecting to itunes problem

    My iphone 4s has just ungraded the software to iOS 7.0.4 and ever since it won't connect to itunes.  Itunes tells me I need version 11.1 to use my iphone but I can't get 11.1 unless my mac is 10.6 which it isn't.  What do I do?

    Swipe upwards from the bottom edge of the screen to reveal the control centre. There you go.

  • HT1414 Iphone screen froze with usb to iTunes display. How can I return iphone to use?

    Iphone 4S froze with a display with USB to Itunes during an Itunes software update for Iphone 4S.  Will not power down or restore, even after holding down home button simultaneously with button on the top right edge. 

    lac_gugolator wrote:
    can someone help the new itunes software is hard to use.
    It's no more difficult to use than any previous version of iTunes.
    lac_gugolator wrote:
    I can not transfer files by folder from an mp3 player to pc
    This has absolutely nothing to do with iTunes.
    lac_gugolator wrote:
    I can not transfer files from  itunes to iphone?...
    It works the same way it has always worked.
    Connect iPhone.
    Select content to be synced.
    Sync.

  • HT1414 iPhone 4s will not charge

    What do I do if I accidentally dropped my iPhone 4s (does not have the latest iOS software) in slush (snow and salt mixed together) and the battery won't charge? But, when I power it off it charges by itself and when I turn it on the battery drains from 100 to 90 percent in less then five minutes. Any suggestions on what to do? Also, there's nothing wrong with my charger because it works for my ipod but not my iphone.

    You should check your original post. I responded to that one and you have asked the same question again. Stay with a single post and do not duplicate posts. It makes it difficult for users that are responding to you for you to try and do what they ask.
    First try a reset. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. The phone should restart. This could take up to 20 seconds if the phone has been unresponsive.
    Otherwise you can check this support document http://support.apple.com/kb/TS3281

Maybe you are looking for

  • Aggregate table

    Hi ! I have a problem when I try to use the aggregate wizard, but only with some dimension tables. This is the error message given by Job Manager : Processed: 1 queries Encountered 1 errors [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general erro

  • Compared to other *nixes

    Compared to other *nixes, does OSX spend a LOT of time with "super" processes? Roger

  • Can't publish to Business Catalyst - Adobe Muse - Help!

    I'm getting this message when I try to publish my Muse site to Business Catalyst. It was just working, and this dialogue won't accept my password. (Then I logged out, changed my password, and still won't accept the new password.)

  • N-Mon.kext was installed improperly

    I have a MacBook Pro Late 2011 with Mountain Lion 10.8.2 - It's has been working fine until yesterday I got this message: "/System/Library/Extensions/N-Mon.kext" was installed improperly and cannot be used. Please try reinstalling it, or contact the

  • SM35, when deleting batches, prevent log from being deleted

    Hello all, When manually deleting batches within transaction SM35, we want to prevent the log from also been deleted.  When the pop-up appears asking whether the log should be deleted, we want only No or Cancel to be valid choices.  We do some report