HT1414 iphone 5 apple logo blinking

my iphone stuck on blinking apple logo

Hi bobbyousaf,
If your iPhone isn't responding, you may find the following articles helpful:
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
Regards,
- Brenden

Similar Messages

  • HT4623 i was updating my iphone 4 through settings but in the middle my phone switched offf n now what i can see is the apple logo blinking n i cant connect it to itunes can  any1 help me?

    i was updating my iphone 4 through settings but in the middle my phone switched offf n now what i can see is the apple logo blinking n i cant connect it to itunes can  any1 help me?

    If you have a backup of your information on your computer, I would suggest putting your phone into recovery mode, by holding down the home key and keeping it held down while you connect it by usb into your computer with itunes running. Keep the home button held down until it indicates recovery mode, and proceed with the restore.

  • Apple logo blinking every 3 seconds - nothing to do with iphone

    Hi all!
    I was using my iPhone, with its battery more than 70%, but suddently it tuned off by itself. I tried restarting though on/off button and home button, but it didn't start. I tried recharging and it didn't work as well. When I tried to connect to iTunes, the phone was not detected as usual. Then, the screen only showed the apple logo blinking every 3 seconds. I also tried updating my itunes, yet it still had no effect. Any other advice how to solve this problem? Thanks.

    Force the phone into recovery mode, as described here, & restore it:
    http://support.apple.com/kb/ht1808
    If that doesn't work, make an appointment at any Apple store.

  • My battery died, I charged phone now black screen apple logo blinking. How do I fix?

    My battery died, I charged phone now black screen apple logo blinking. How do I fix?

    If Apple replaced the battery, contact them to check the phone, the battery replacement is covered by a warranty.
    iPhone - Contact Support - Apple Support

  • HT4623 iPhone apple logo goes on and off and is unresponsive

    iPhone apple logo goes on and off and is unresponsive

    It needs to be dried out. Stop using it.. don't turn it on. Put it in a zip lock bag with some rice or one of those packets of dessicant for a day or two. That might do it.
    i
    (And stop taking it into the sauna... or swimming)

  • My Ipod classic 160 gb,is dead only blinks when plugged to cpu via usb cable reset apple logo blinks as well Help!!!

    My Ipod classic 160gb is dead,It only responds when I plug it in to cpu via usb cable then the screen blinks.When I try to reset it the Apple logo appears but the apple logo  blinks on and off to as long as i hold the buttons down,when i realease the reset buttons it just blinks back and fourth to the blank gray screen,it worked fine yesterday night this morning its tanked.is this unit completely dead or can something be done at home?
    Thank you for your help
    Ice

    I wrote this long time ago, have a read and see whether it can be soloved
    If a sad iPod icon or an exclamation point and folder icon appears on your iPod’s screen, or with sounds of clicking or HD whirring, it is usually the sign of a hard drive problem and you have the power to do something about it now. Your silver bullet of resolving your iPod issue – is to restore your iPod to factory settings.
    http://docs.info.apple.com/article.html?artnum=60983
    If you're having trouble, try these steps at different levels one at a time until the issue is resolved. These steps will often whip your iPod back into shape.
    Make sure you do all the following “TRYs”
    A. Try to wait 30 minutes while iPod is charging.
    B. Try another FireWire or USB through Dock Connector cable.
    C. Try another FireWire or USB port on your computer .
    D. Try to disconnect all devices from your computer's FireWire and USB ports.
    E. Try to download and install the latest version of iPod software and iTunes
    http://www.apple.com/itunes/download/
    For old and other versions of iPod updater for window you can get here
    http://www.ipodwizard.net/showthread.php?t=7369
    F. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
    http://www.apple.com/support/ipod/five_rs/
    G. Try to put the iPod into Disk Mode if it fails to appear on the desktop
    http://docs.info.apple.com/article.html?artnum=93651
    If none of these steps address the issue, you may need to go to Intermediate level listed below in logical order. Check from the top of the lists to see if that is what keeping iPod from appearing on your computer in order for doing the Restore.
    Intermediate Level
    A. Try to connect your iPod with another computer with the iPod updater pre-installed.
    B. Still can’t see your iPod, put it in Disk Mode and connect with a computer, instead of doing a Restore on iPod Updater. Go and format the iPod instead.
    For Mac computer
    1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
    2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
    3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
    4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
    5. Eject your iPod and do a Reset
    6. Open the iTunes 7 and click “Restore”
    For Window computer
    Go to folder “My Computer”
    Hope you can see your iPod there and right click on the iPod
    Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
    Now select “Format”
    Eject your iPod and do a Reset
    Open the iTunes 7 and click “Restore”
    In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“HP USB Disk Storage Format Tool”.
    http://discussions.apple.com/thread.jspa?threadID=501330&tstart=0
    C. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
    Tips
    a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iTunes 7.
    b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
    c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
    http://discussions.apple.com/thread.jspa?messageID=2364921&#2364921
    Advance Level
    A. Diagnostic mode solution
    If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
    You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
    Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
    iPod 1G to 3G: "Menu" and "Play/Pause"
    iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
    The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
    iPod 1G to 3G: "REW", "FFW" and "Select"
    iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
    You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
    Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service.
    B. Format your iPod with a start disk
    I have not tried this solution myself, I heard that there were few successful cases that the users managed to get their iPod (you must put your iPod in disk mode before connecting with a computer) mounted by the computer, which was booted by a system startup disk. For Mac, you can use the Disk Utility (on the Tiger OS system disk), for PC user, you can use the window OS system disk. Try to find a way to reformat your iPod, again it does not matter which format (FAT32, NTFS or HFS+) you choose, the key is to erase the corrupted system files on the iPod. Then eject your iPod and do a Reset to switch out from Disk Mode. Reboot your computer at the normal way, connect your iPod back with it, open the iPod updater, and hopefully your iPod will appear there for the Restore.
    If none of these steps address the issue, your iPod may need to be repaired.
    Consider setting up a mail-in repair for your iPod http://depot.info.apple.com/ipod/
    Or visit your local Apple Retail Store http://www.apple.com/retail/
    In case your iPod is no longer covered by the warranty and you want to find a second repairing company, you can try iPodResQ or ifixit at your own risk
    http://www.ipodresq.com/index.php
    http://www.ifixit.com/
    Just in case that you are at the following situation
    Your iPod warranty is expired
    You don’t want to pay any service charges
    You are prepared to buy a new one
    You can’t accept the re-sell value of your broken iPod
    Rather than leave your iPod as paper-weight or throw it away.
    You can try the following, but again, only do it as your last resort and at your own risk.
    Warning !!!! – It may or may not manage to solve your problem, and with a risk that you may further damage your iPod, which end up as an expensive paper weight or you need to pay more higher repairing cost. Therefore, please re-consider again whether you want to try the next level
    Last Resort Level
    1. . Disconnecting the Hard Drive and battery inside the iPod – Warning !! Your iPod warranty will be waived once you open the iPod.
    In Hong Kong there are some electronic shops offering an iPod service for Sad iPod, the first thing they do is to open up the iPod’s case and disconnecting the battery and the Hard Drive from the main board of the iPod. Wait for 5-10 minutes and reconnecting them back. The reason behind which I can think of is to do a fully reset of a processor of the iPod. In case you want do it itself and you believe that you are good on fixing the electronics devices and have experience to deal with small bits of electronic parts, then you can read the following of how to open the iPod case for battery and HDD replacement (with Quicktimes)
    http://eshop.macsales.com/tech_center/index.cfm?page=Video/directory.html
    2.Press the reset button on the Hard Drive inside the iPod – Suggestion from Kill8joy
    http://discussions.apple.com/thread.jspa?messageID=2438774#2438774
    Have I tried these myself? No, I am afraid to do it myself as I am squeamish about tinkering inside electronic devices, I have few experiences that either I broke the parts (which are normally tiny or fragile) or failed to put the parts back to the main case. Therefore, I agree with suggestion to have it fixed by a Pro.
    2. Do a search on Google and some topics on this discussion forum about “Sad iPod”
    Exclamation point and folder and nothing else
    Spank your iPod
    http://www.youtube.com/watch?v=3ljPhrFUaOY
    http://discussions.apple.com/thread.jspa?messageID=3597173#3597173
    Exclamation point and folder and nothing else
    http://discussions.apple.com/thread.jspa?messageID=2831962#2831962
    What should I do with my iPod? Send it or keep it?
    http://discussions.apple.com/thread.jspa?threadID=469080&tstart=0
    Strange error on iPod (probably death)
    http://discussions.apple.com/thread.jspa?threadID=435160&start=0&tstart=0
    Sad Face on iPod for no apparent reason
    http://discussions.apple.com/thread.jspa?threadID=336342&start=0&tstart=0
    Meeting the Sad iPod icon
    http://askpang.typepad.com/relevant_history/2004/11/meeting_the_sad.html#comment -10519524
    Sad faced iPod, but my computer won’t recognize it?
    http://discussions.apple.com/thread.jspa?messageID=2236095#2236095
    iPod Photo: unhappy icon + warranty question
    http://discussions.apple.com/thread.jspa?messageID=2233746#2233746
    4th Gen iPod Users - are we all having the same problem?
    http://discussions.apple.com/message.jspa?messageID=2235623#2235623
    Low Battery, and clicking sounds
    http://discussions.apple.com/thread.jspa?messageID=2237714#2237714
    Sad faced iPod, but my computer won’t recognize it
    http://discussions.apple.com/thread.jspa?messageID=2242018#2242018
    Sad iPod solution
    http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
    Re: try to restore ipod and it says "can't mount ipod"
    http://discussions.apple.com/thread.jspa?threadID=443659&tstart=30
    iPod making clicking noise and is frozen
    http://discussions.apple.com/thread.jspa?messageID=2420150#2420150
    Cant put it into disk mode
    http://discussions.apple.com/thread.jspa?messageID=3786084#3786084
    I think my iPod just died its final death
    http://discussions.apple.com/thread.jspa?messageID=3813051
    Apple logo & monochrome battery stay
    http://discussions.apple.com/thread.jspa?messageID=3827167#3827167
    My iPod ism’t resetting and isn’t being read by my computer
    http://discussions.apple.com/thread.jspa?messageID=4489387#4489387
    I am not suggesting that you should follow as well, but just read them as your reference. You are the person to make the call.
    Finally, I read a fair comments from dwb, regarding of slapping the back of the iPod multiple times
    Quote “This has been discussed numerous times as a 'fix'. It does work, at least for a while. In fact I remember using the same basic trick to revive Seagate and Quantam drives back in the mid to late 1980's. Why these tiny hard drives go bad I don't know - could be the actuator gets stuck in place or misaligned. Could be the platter gets stuck or the motor gets stuck. 'Stiction' was a problem for drives back in the 80's. Unfortunately the fix can cause damage to the platter so we temporarily fix one problem by creating another. But I know of two instances where a little slap onto the table revived the iPods and they are still worked a year or more later.”UnQuote

  • Pls my macbook air is not booting up,when i switch it on the apple logo blinks with a question mark in it.what do i do?, pls my macbook air is not booting up,when i switch it on the apple logo blinks with a question mark in it.what do i do?

    pls my macbook air is not booting up,when i switch it on the apple logo blinks with a question mark in it.what do i do?, pls my macbook air is not booting up,when i switch it on the apple logo blinks with a question mark in it.what do i do?

    See here  >  http://support.apple.com/kb/TS2570

  • HT4623 help! I didn't use my ipad for about a month then now it would not turn on, just a balck screen with apple logo blinking in the middle, please help

    Help me. I did not use my ipad for about a month.Now that I turned it on after trying to charge it for many hours, it just would not turn on, just a black screen with sometimes an apple logo blinking, brought it to repair shops, said they could not fix it, please help

    The terms of service of the Apple Support Communities prevent us from helping anyone with a jailbroken phone.
    You're on your own.  Good luck.

  • Iphone4  apple logo blinking

    i have iphone4 at&t phone not unloacked, updated 5.0 1 and jbed after 3 days back wifi and bluetooth adress hiden and phone off the turn on time only apple logo blinking tred restore fw and also used cfw with sn0wbreez
    error 21,1601,1602,1604,2005, 20,16,etc
    restore time prepairing phone for restore and stuck , dfu mode using time phone disconnect apple logo blinking used redsnow matrix display coming time phone suddenly off and auto on logo blinking
    try another system same iam reassembled phone problom still
    iam edit host file same problom
    sory my bad english
    any body idea?????????????????????????????????????????????? ????

    The jailbreak made your phone unusable, and problems with those devices can't be discussed here, due to the Terms of Use.
    Sorry, the only help you could get, is from those people who convinced you to modify the software.
    Unauthorized modification of iOS has been a major source of instability, disruption of services, and other issues

  • "Waiting for iPhone... " alwayz stuck at this stage...Already tried using DFU mode and many times...but always stuck at this stage. However in iphone APPLE LOGO and Status bar is coming but not processing ahead!

    "Waiting for iPhone... " alwayz stuck at this stage...Already tried using DFU mode and many times...but always stuck at this stage. However in iphone APPLE LOGO and Status bar is coming but not processing ahead! Even my device is not jailbroken.
    iTunes recognize this device and giving option for Restore. i go for it and in the continue process WAITING FOR iPHONE /// at this stage it stuck.. and keep serching like for something and in the iPhone APPLE LOGO and Status bar showing..but not processing further.

    Shaishel,
    Did you resolve this?  I am having the same problem!  Let me know if you have any suggestions.
    Thanks

  • My iphone went dead and now has the apple logo blinking on and off

    my iphone 4 went dead and now has the apple logo is slow blinking on and off when it's plugged into my computer. I cannot stop it. Tried a hard restart but nothing happened.

    Morning blgarratt,
    Thanks for using Apple Support Communities.
    If it is showing the Apple logo with no progress bar or a stopped progress bar, for over ten minutes.
    For troubleshooting on this, take a look at this article:
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    Hope this helps,
    Mario

  • IPhone 4 won´t turn on, apple logo blinks

    When I woke up this morning, my iPhone 4 said that I had to activate it by connecting it to iTunes. I had no computer nearby, so I waited for a while. Now it does not react, unless it plugged in to a Mac. When it is plugged in the apple logo appears for 10 seconds and then it´s gone. It has been blinking for about 4 hours now. I´ve tried to hold the power and the home buttons in several times, but it does not work. It was and still is fully charged. Anyone who has any experience with this?

    You'll probably have to try to force it into recovery mode and restore it: http://support.apple.com/kb/ht1808.

  • Why is the Apple logo blinking?

    When I woke up this morning, my iPhone was doing fine. I pulled up an app and within two minutes, it darkened, a line showed up on the screen, then it turned off. I tried to plug it in, and it was unresponsive to being charged. Now, only the Apple logo is on the screen. It shows up, glitches, then fades with another line on the screen. I tried holding down the power and home buttons, but it did not do anything.My phone was not exposed to anything out of the ordinary (water, heat, cold, etc.), but it won't even function. What's wrong with it?

    try to reset it (Home and ON buttons) while it is plug in the computer and itunes is open. But maybe you will have to restore it

  • IPhone Apple Logo and Display Flashing

    Apple iPhone was very hot and froze. I just reset it and it keeps loading up tot the Apple Logo, then flashes and resets itself. Won't let me reset or shut off. I plugged it into the Dock Connector it came with, and it wouldn't be recognized by iTunes. I reset it when it was in the dock and waited for it to cool down. I then held the power button and it started back up again.
    It won't be recognized by iTunes to restore.
    Any help?

    To solve this:
    Plug your phone in, hold the home/sleep buttons until your phone is put into DFU mode. In iTunes, hold shift, and click on restore. Browse to the firmware version you want to restore to, and click okay.

  • Doesn't start, Apple logo blinks on and off.

    My iPod Classic won't start.  There's just a pale image of the Apple logo which blinks on and off.  Plugging it into various USB ports has no effect.
    Dying battery?  (I've had the device for about a year only.)

    Okay, here's something I found out: charging it with a power adapter instead of via the USB cable worked.
    Question: why would charging it with the USB connection not work?

Maybe you are looking for

  • Pdf in Safari: Get a blank screen when I click on a PDF

    [Inventory] Safari 5.0.5 Acrobat Pro 9.4.4 up-to-date Acrobat Reader 10.0.3 up-to-date iOS 10.6.7 [Problem] When I surf the internet using the Safari browser And I click on a link that is a PDF, I get a blank screen.  The PDF does not render in the n

  • LED monitor and a 2007 mac pro compatibility

    My mac monitor is busted, I need to get a new one, though this time it won't be an apple one.  I have a 2007 mac pro, what I need to know is a LED monitor compatible with my mac pro.  For instance, this one, http://www.amazon.co.uk/gp/product/B005MHM

  • How to bind a bapi dynamically in webdynpro abap program

    Hi Gurus, I want to bind a bapi dynamically in my webdynpro abap program. I have four bapis in my program. During run time depending on requirement appropriate bapi should be binded to context node. Please send me links to documents or code urgently.

  • How to transmit V/A signal over internet?

    I have transmit the signal over network successfully,but how to transport them over internet? I use AVTransmit2.java or VideoTransmit.java can transport the V/A signal over network,but the sample need to fill in the parameter. I hope transmitting V/A

  • How to get ArrayCollection length in initial function?

    Hi, I am working for conver Application form Flex 2 to Flex 3. I have the following code,I can see in the dataGrid and ArrayCollection length in the label "loopNumber",but why I can not get ArrayCollection length in initPage() for Flex 3 and the loop