HT1414 Ipod Mini not working after trying to update to IOS7

Team Apple....HELP!
I recently tried to in tall the new IOS 7 on my Mini Ipad....but I get the connect to Itunes with USB cable on the screen. 
I've intalled the latest updates to the OS on my MAC Laptop and the latest version of Itunes.
Itunes saw a system that needed to be restore and took two hours to down load something (sorry, can't recall).  After the down load, I'm still stuck with the conect to Ituense with USB cable on the screen.
Ok, I've tried all the below intsrutction from these links, with no success:
http://support.apple.com/kb/HT1414
http://support.apple.com/kb/HT1808
http://support.apple.com/kb/TS1591
Any help or suggestions would be appreciated.
G

First, try a system reset although I can't give you any confidence.  It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.

Similar Messages

  • Apple TV does not work after trying to update software. Main light keeps blinking and on the screen shows itunes icon and a usb cable. What does that means?

    My Apple TV does not work after trying to install the new software update. The main light keeps blinking rapidly and on the screen it shows the itunes icon and a USB cable. What does that mean?

    The Apple TV is in recovery mode. Try to restore the Apple TV. Follow the link for instructions on the restore process.
    http://support.apple.com/kb/HT4367

  • How come my mini iPad is not working after trying to update apps?

    My mini iPad is repeatedly showing me a black screen with a, "white apple," in the middle & then a couple of minutes later it turns off for a few minutes. Then the black screen with the, "white apple," in the middle comes back on again and then it goes black again. Sometimes the black screen would lighten and the whole pattern of these "screens" would start over again. It's been doing this for hours since I fell asleep.
    This happened when I was trying to update 4-5 apps at the same time. It had trouble updating the, "Pinterest app." It failed once and I retried it and that's when my mini ipad started to not work. I can't use it at all. I never had trouble updating several apps at one time before. I was at home using my wifi and my wifi strength was at its maximum for the iPad.
    The battery was at 40 something%, so I charged it over night. It has the latest iOS update software. I had downloaded that yesterday.
    I plugged it into iTunes on my computer and the same thing is happening. It's picking up my icloud stuff like my music and videos and my computer is trying to import photos from my mini ipad automatically, but my iPad isn't fully recognizable on iTunes. I get 2 error messages. One says, "iTunes was unable to load data class information from Sync Services. Reconnect or try again later." I also get an error when trying to import photos (just to try it out). The other error message says, "The iPad cannot be sync because this iPad cannot be found."
    And so, I unplugged it and plugged it back in and I get the same response. My iTunes is the latest version.
    I don't have warranty on this iPad and I spent like $500 on this one. I'm kinda worried...?
    Any kind of response would be appreciated....

    First, try a system reset although I can't give you any confidence.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • ITunes error - will not work after trying to update to 7.2, then to 7.3

    I have tried to update to both 7.2 and to 7.3, but both updates have failed. Now I am stuck on 7.1 with an error, where my iTunes will not operate and I cannot uninstall because it comes up with the same error that I get when I try to install or uninstall.
    Below are links to images of the errors:
    Here is the error I have currently:
    http://i11.tinypic.com/4qfw4yc.jpg
    Here is the error I get when I try to reinstall, update or uninstall:
    http://i7.tinypic.com/6he0ft0.jpg
    I would appreciate your assistance!

    It sounds as though you need this article on trouble installing iTunes:
    http://docs.info.apple.com/article.html?artnum=93976
    You need the section at the end after "Important: A majority of customers..."
    I think you need to do a full removal of iTunes and quciktime with clean up. But the important bit is to clean up the installer files with the MS Installer Clean Up Utility.
    If cleanup doesn't seem to work, it is worth checking you have the right version of the Windows installer. If you find it in add remove programs, it should say "Windows Installer 3.1 (KB893803)"

  • Ipod Shuffle not working after trying all possible supports from Apple!!!!!

    I have an ipod shuffle and it has been working fine. It turns on and off and I can play music. Now all of a sudden I cannot connect my shuffle to my labtop through its usb port. It won't recognize it at all, it cannot be charged and I cant even attempt to put new songs on it. I am very angry with apple's service. I tried all things possible on their site and have continually requested repair service. I constantly get an unrecognized serial number every single time! I have copied it word for word and number for number over and over and over again. I can't even get one on one chat with a representative online because you guys don't recognize a serial number! This is just one big hassle and I don't feel like your service is very helpful at all. I love the Ipod and all it's accessories and other models but this is ridiculous. I even purchased the usb shuffle dock to try and see if it was my computer but it isn't. The dock doesnt recognize my shuffle either. I would appreciate it if Apple would just give me some kind of recognition and service me as a consumer please. I don't want to fill out some fax forms I don't even have a fax machine. Please help me figure out what's wrong or send me the things I need to send my shuffle in for repair thank you.

    Just a note, the limited warranty on the Ipod Shuffle is 1 year. So when I got invalid serial number when I entered the s/n I knew something was wrong. What I discovered was that the character that I thought was a zero was actually a "D" and the "5" was actually an "S". Once I entered the correct serial number the website told me how much time I have left under the warranty. They even knew the approximate date that I purchased it - even though I didn't register it. So use a magnifying glass, a younger set of eyes, whatever to make sure you're entering the correct S/N. Now I just have to figure out HOW to return it. Good Luck!
      Windows XP  

  • IPod no longer works after trying to update

    I recently tried to get the software update on my iPod touch 4th generation. When I did the iPod restarted then gave me a completely white screen which I can't even force quit out of. Hooking up to the computer does not help, iTunes does not even recognize the iPod. When the battery is charged it will show the low battery screen but when it loads the black start up screen with the apple it gradually gets lighter until the screen is completely white. Please help I have no clue what to do from here!

    fyi - i solved this by uninstalling and reinstalling my modem in device manager. perhaps all i needed to do was to clear the fields filled in with gobbeldygook by nokia's connectivity thing - not sure.

  • My iPad2 is not working after an unsuccessful update to the new iOS6. How do I get working?

    My iPad2 is not working after an unsuccessful update to the new iOS6. How do I get working?

    - Try resetting the iPod. Nothing will be lost.
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Download/install a new app
    - Restore from backup
    - Restore to factory daults/new iPod.

  • Wifi not working after latest iOS update

    wif not working after latest iOS update 7.0.4.  Any suggestions?

    Same happening to my iphone no wifi or bluetooth since latest update tryed everything reset restore reset back to factory setting all to no avail phoned apple they want 155 pound for a replacement (cheeky #$%/$$#@) when everyone knows its there fault .i read phone may need new wifi chip if its out of warrenty cheaper to take to local phone doctor

  • Airplay is not working after the latest update, whats wrong? Sound will not go to Apple TV or my Surround receiver

    Airplay is not working after the latest update, whats wrong? Sound will not go to Apple TV or my Surround receiver

    Hi Tokha,
    If you are having an issue with using AirPlay from your MacBook Air, I would suggest that you troubleshoot using the steps in this article - 
    iTunes: Troubleshooting AirPlay and AirPlay Mirroring - Apple Support
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • HT201366 CAC readers not working after installing security update 2013-003?

    Is anyone else having problems with CAC readers not working after installing security update 2013-003? CAC required websites are causing safari and chrome to crash.

    For CAC issues, see:
    MilitaryCAC's Mac OS X support landing page
    Please follow these directions to delete the Mail "sandbox" folder.
    Back up all data.
    Triple-click the line below to select it:
    ~/Library/Containers/com.apple.mail
    Right-click or control-click the highlighted line and select
    Services ▹ Reveal
    from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder — not just its contents — to the Desktop. Leave the Finder window open for now.
    Quit and relaunch Mail, and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window. If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Post your results.
    Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

  • HT4623 Anyone having trouble with App Store install and cloud store buttons not working after 6.1 update?

    Anyone having trouble with App Store install and cloud store buttons not working after 6.1 update? I go to install an app. I hit install and nothing happens. About a minute later it asks me for my password and then it does nothing. The install button goes back to saying install. However the app shows up in my installed list and in cloud but no app installed.

    OK - I found a helpful post - closed app store app and under Settings/General/Date and Time I reset the date and time by switching off "Set Automatically" and then switching it on again. Went back to App Store, launched it and Updatesseems to be working again.
    Go figure? Logical, No!

  • Itunes is not loading after i've updated to ios7. What do i do?

    Itunes is not loading after i've updated to ios7. What do i do?

    Try a Restart.
    Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
    Resetting your settings
    You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
    Resetting your device
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
    Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple.
    Here is a link to their contacts with most of the information below.
    http://www.apple.com/contact/

  • IPod touch not working after 5.0.1iOS update

    It seems like a lot of people are having issues after the new 5.0.1iOS update. I want to share my frustration and what problems I'm facing. After the update my ipod won't sync properly. It freezes my computer and then my computer shuts down everytime I have my ipod connected to my computer. My music and apps on my iPod are like ghosts they are visible but do NOT work after being pressed. I tried resetting the ipod, same problem. I uninstalled and reinstalled iTunes, same problem. There is only problems with my computer when the iPod is plugged into the computer and trying to update. I am so ANGRY because I love my iPod and I can't use it to listen to music or communicate with my family and friends. I hope Apple will help all of us soon and fix these HUGE bugs, and FAST.

    Have you tried the sandard fixes:
    - Reset. Nothing will be lost
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears
    - Retore from backup
    - Restore to factory defaults/new iPod.

  • HELP ME!! iPod mini not working

    ok.. my iPod is not working.. i try to turn it on and all that comes up is the apple logo.. and it makes this really loud whirring sound.. the apple logo goes away and then the little sad ipod icon comes up and it turns off.. i dont know what else to do.. i have tried charging it and connecting it to my computer.. i have tried manually resetting it but it wont work.. i cant restore it using the computer because it does not connect.. somebody please help me!
    ipod mini   Windows XP  

    well first off I would contact apple and see what they say.. if they will fix it, how much it could/would cost etc. If they wont help you I suggest going with a ipod repair company.. something like www.ipodmods.com or www.ipodresq.com. Get in touch with them add see again if they are willing to look at it and how much it will/could cost..
    good luck.
    KoDor

  • B110a black in still not working after trying all recommended solutions

    Hi there
    Black ink still not working after spending many hours trying to sort. I've cleaned the printhead carefull several times (is immaculate now) and run the system clean up and alignment functions several many times too. I've cleaned the metal connecting points. I wiggled things carefully. I've attempted printing multiple pages in b/w in case it was going to take a while to get the ink flowing again. I've replaced one (expensive) new black cartridge with another brand new (expensive) cartridge and still nothing. This machine is probably out of warranty but seriously not very old. It really ought to be working okay. We use it regularly a little bit every week. Any ideas?

    The document here has troubleshooting steps that may help resolve black not printing on your Photosmart b110a.  Be sure to check the vents as shown in solution six, step three.  If the above does not resolve the problem the post here may help.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Maybe you are looking for

  • Can anyone decipher this kernel?

    Interval Since Last Panic Report:  133243 sec Panics Since Last Report:          5 Anonymous UUID:                    7BCF0AE7-03EE-474A-9DB0-6162338FD315 Wed Jan 29 22:25:41 2014 Machine-check capabilities (cpu 1) 0x0000000000000006: family: 6 model

  • To create an APPOINTMENT using report in webui

    Hello Experts, Please send the steps how to create appointment or quotation or any example report program(with sample code) in web ui.

  • Authentication using userCertificate and SASL External

    hi! I try to authenticate using SASL "External" and SSL. The SSL connection works fine, also SASL when using "Digest-MD5" but when I try to authenticate using "External" I get connected as anonymous. Here is what I did: I created a self-signed certif

  • Windows 2008 R2 - You have been logged on with Temp Profile

    Hi Guys, One of our Server which was running Win2008 R2 crashed due to power & ups failure. I reinstalled the OS and restored System State backup since then whenever i login to the server i get this message, please check the screenshot and suggest. M

  • Replace all occurrence with range - issue

    Hi, I have a range with "letters" like ":" or "-" or "." Note: all entries are with option = "equal" Now i need to "replace all occurrences" of "all entries in that range" with space. idea: loop at range assigning <range>. replace all occurrences of