HT1414 IT SEEMS LIKE EVER SINCE I UPDATED MY 4s TO THE OS 6 MY BATTERY LIFE HAS BEEN CUT WAY DOWN!!! I NEVER HAD TO CHARGE THE BATTERY THROUGHOUT THE DAY LIKE I AM NOW WITH THE OS6 UPDATE
IT SEEMS LIKE EVER SINCE I UPDATED MY 4S TO IOS 6 MY BATTERY LIFE IS NOT WHAT IT WAS BEFORE DURING THE DAY. I HAE TO PLACE IT ON THE CHARGER MANY TIMES THROUGHOUT THE DAY
Please stop shouting at us.
All caps indicates shouting, is considered rude, and is difficult to read.
Many will not read such posts.
Have you tried the bascis from the manual?
restart, reset, restore.
Have you checked your settings to make sure that you do not have something running that you do not want to run?
Similar Messages
-
After updating to iOS 8 on my 5s my battery life has been cut in half.
After updating to iOS 8 on my 5s my battery life has been cut in half. I turned off Bluetooth, location services. It drains it even when not in use. I am an RN who works 12 hour shifts and I had to charge my phone twice with little use.
The Ultimate Guide to Solving IOS Battery Drain
http://www.overthought.org/blog/2014/the-ultimate-guide-to-solving-ios-battery-d rain -
I just got a new IPAD and transferred everything through the cloud from my old IPAD 2. The new one says "this IPAD is currently being restored. It has been that way for over two hours. Also, I Books opens and then closes right away with no content. Does it take this long, or is there an issue?
I also tried manually underlining a few things on the new iPad and when highlighting a paragraph, it would skip a few lines and the line would go through a few as well. Looks like a major iBooks glitch needs to be addressed here.
-
Ever since I updated what looked like iTunes 10.6.1 my computer has been corrupted with Malware, which has filled up all available space on my hard drive. What do I do to get rid of the Malware?
First, reboot. That will temporarily free up some space. According to Apple documentation, you need at least 9 GB free for normal operation. You also need enough space left over to allow for growth of your data.
Use a tool such as OmniDiskSweeper to explore your volume and find out what's taking up the space.
Proceed further only if the problem hasn't been solved.
ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To really see everything, you have to run it as root.
First, back up all data if you haven't already done so. No matter what happens, you should be able to restore your system to the state it was in at the time of that backup.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Terminal in the page that opens.
After installing ODS in the Applications folder, drag or copy — do not type — the following line into the Terminal window, then press return:
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up.
I don't recommend that you make a habit of this. Don't delete anything while running ODS as root. When you're done with it, quit it and also quit Terminal. -
i need to add bpm to my songs but in some of them i just can't add/modify any info. it seems like it happens only with the verified songs (the ones i download from souncloud work for example) probably verified trough gracenote..is there anything i can do?
this is what happens when i try to add/modify the infos and it doesn't work, i'm even unable to click in the spaces
thanks for your attention,sorry for the bad englishRight-click on your main iTunes folder and click Properties, then go to the Security tab and click Advanced. If necessary grant your account and system full control to this folder, subfolders and files, then tick the option to replace permissions on child objects which will repair permissions throughout the library. This is the XP dialog but Windows 7 shouldn't be too different.
tt2 -
Ever since I updated to Firefox 7.1, my computer won't go to the internet when I double-click the Mozilla Firefox icon, like it normally does; I have to restart my computer to be able to access the internet. Why?
There is a difference between remembering the name and password in the Password Manager and a "remember me" check box on a web page to log you in automatically.<br />
The latter usually involves the creation of a special "remember me" cookie that is stored on your computer and that is send to the server.<br />
If that "remember me" cookie is removed or gets corrupted or is not send to the server then the server won't remember you anymore and you need to sign in once again.<br />
<br />
* http://kb.mozillazine.org/Cookies
* http://kb.mozillazine.org/Password_Manager
So make sure that you keep the cookies from those sites via an allow exception and that you do not clear the cookies or site preferences via "Clear Recent History". -
Ever since I updated my Mac to Maverick it has become exceedingly slow everywhere. Also annoying, when I go into Applications to open something, it now automatically opens 3 things I don't need. What can I do to fix this?
Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
Reinstall Lion, Mountain Lion, or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless. -
When prompted if I want to open or save a download, I choose SAVE and the usual window opens where I can choose a folder to save the download. After the last Firefox update, that SAVE window now displays all folders NOT in alphabetical order, but in Least Used to Most Recently Used order. Why??
Hi Brett555,
We wonder if there is any luck your issue has been resolved, if you've found solution by yourself. We would appreciate it if you could share with us and we will mark it as answer.
I am supposing you have this issue when you try to save files every time not just in office. Since It is possibly that this issue caused by certain software installation, as arnavsharma mentioned that please check your issue under safe mode.
If this issue persists, try creating a new user account and check if the issue persists there.
If it works in a new user account then you need to fix the corrupt user profile. You may visit this link for the steps:
http://windows.microsoft.com/en-US/Windows7/Fix-a-corrupted-user-profile
If this issue happened recently, please check any action you took or restore your system to earlier point.
Regards
D. Wu
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
I dont know why but ever since I updated my iphone 3gs 16GB to the new 5.1.1 firmware I am unable to activate it with any sim, so is there any way to fix this please? Is there a solution to activating my Iphone 3gs on this firmware? I purchase this iPhone from USA and Im using it in India. Please help me...
This means the iPhone was hacked to be unlocked. The 3GS was not sold in the US as officially unlocked.
Restoring an iPhone with iTunes that was hacked to be unlocked or installing a firmware update on an iPhone that was hacked to be unlocked re-locks the iPhone to the carrier the iPhone was sold as carrier locked when new. In this case, re-locked with ATT. -
Ever since I updated my iphone3 to ios 6, I am unable to make purchases on itunes or Apps. I click onto what I want and it appears on my home screen but justs keeps saying waiting. Does anybody know what to do to rectify it.
Hi imobl,
Thanks for your response, I forgot to add that the five 3uk sims we have in use, I have tried all of them none of them are recongnised non of them have pin codes, I even purchased four more sims Tmobile (original carrier) Vodaphone, 3 and giffgaff. -
(iTunes 10.4.1) Ever since i updated my itunes my music isnt playing right it sounds weird
(iTunes 10.4.1) Ever since i updated my itunes my music isnt playing right it sounds weird
I have the same problem. My music sounds like digital techno that I can,t understand, like all the real music is converted to some alien language thats warped.
-
Quicklook helper crashes my computer ever since I updated to 10.10.3
ever since I updated to 10.10.3, when i select a file in finder(while in column view) the Quicklook(or preview function to see what the file looks like) crashes my computer(panic shutdown) SI their a fix to this?
The combo updater includes all the past updates. If something wasn't quite right then the combo updater may fix it. Then sometimes it because the first update did not work properly. The second one fixes that. There are no other differences.
-
HELP!! My iphone 4 can't load any of the downloaded application such as Facebook and games etc ever since i updated my phone last night through itunes and it indicates that it has an error 1004.
Anyone has any idea how to fix this ?If the error occurred during the update you need to redo the update, as it corrupted something on your phone. Knowledge Base article http://support.apple.com/kb/TS1275 says:
Error 1004 and 1013: This error may be the result of the connection to gs.apple.com being blocked, redirected, or interrupted. Adjust your hosts file or security software to ensure that connections to gs.apple.com are not blocked. If the issue persists, try restoring on another computer with a known-good connection. If this restore is successful, you will need to contact whoever supports your install of the operating system and security software installed on your computer for assistance. If your hosts file redirects requests to gs.apple.com, you may choose to follow Can't connect to the iTunes Store, in the "The 'hosts' file may be blocking the iTunes Store" section.
This usually happens if you have used a hacking program like Tinyumbrella on your computer sometime in the past. -
Ever since I updated iTunes my iPods will not sync with my cars
Ever since I updated iTunes my iPods will not sync with my cars.I have a 30g and 60g 5th gen iPods that I use in my two car. In my cars I have a dealer installed integration module so that I can navigate my I pods play list artist and song titles using the radio itself. Ever since that last iTunes update 7.3.1. I no longer am able to use this feature. I used my sister’s 30g iPod that she did has not updated and the system works fine. Can someone help me with this problem.
I have had an Alpine head unit in my car with the ipod connection for about a year and it has worked fine until recently. Now I get an error message on the ipod that reads, "The currently attached accessory is not supported by this ipod." I have tried connecting a buddy's ipod to my car stereo, and his still works fine with it. I've done the 5 R's, tried going back to an older version of itunes as Alpine suggested. My next step will be going to the Apple store with an appointment, seeing what they say.
-
Ever since I updated iTunes my iPods will not sink with my cars
Ever since I updated iTunes my iPods will not sink with my cars.I have a 30g and 60g 5th gen iPods that I use in my two car. In my cars I have a dealer installed integration module so that I can navigate my I pods play list artist and song titles using the radio itself. Ever since that last iTunes update 7.3.1. I no longer am able to use this feature. I used my sister’s 30g iPod that she did has not updated and the system works fine. Can someone help me with this problem.
I have had an Alpine head unit in my car with the ipod connection for about a year and it has worked fine until recently. Now I get an error message on the ipod that reads, "The currently attached accessory is not supported by this ipod." I have tried connecting a buddy's ipod to my car stereo, and his still works fine with it. I've done the 5 R's, tried going back to an older version of itunes as Alpine suggested. My next step will be going to the Apple store with an appointment, seeing what they say.
Maybe you are looking for
-
Hi Experts, Currently in my custom program I have an issue regarding downloading ALV to excel file where one of the fields in the report will output more than 400 characters which is in Chinese characters and this field already type to string. The pr
-
mac mail keeps sending emails from my different accounts even though it says correct email in "sent" folder and correct email account was highlighted. Recipients reply and it goes to different email address. So confusing and annoying.
-
Bex: currency conv at prev date
Hello BE Experts, Wondering if there is a way to do the currency conversion in the Bex report for a previous date currency rates. eg: I want to run the report for the past 6 months of sales for the europe in USD. each month is displayed in the one co
-
LIV posting for exch. rate due to GR
Hi, During GR for a foreign curr(FC) against local curr(LC), the entry is : DR Expense FC$100 LC$200 CR GR FC$100 LC$200 During LIV, the following entry are posted : CR Vendor FC$100 LC$180 DR GR FC$100 LC$200 CR Exp
-
Hello. I have a tiny issue, but it is not a problem. When I logon to a site and stay idle for sometime and i try to open resources or admin pods or any of the links in sap me, it wont work. As it turns out after some time of idling I'm being logged o