HT1414 Latest Update Problem with my 4s

I did not back up my phone before the update. Now my phone is stuck on the plug to itunes screen which wants me to restore. Is there anyway to go back and backup before I restore?

First remove the battery for 5 minutes, reconnect the battery, connect it to your pc and run the updater again. Leave it for a few minutes and it should go into recovery mode.
If not disconnect it and try a hard reset.
Hard reset:
1. Switch off the phone.
2. Hold down the following three buttons: Green (the call answer button), * button, and '3' button.
3. While holding these buttons, press the power button and switch on the phone.
4. Release when the phone shows the nokia logo or shows other signs of life like the language selection screen.
If that fails to fix it try the advice offered in this post by drummer27:
/discussions/board/message?board.id=swupdate&message.id=14152#M14152
If that still fails then the last option is to take the phone to a nokia care point.
Care points/service centres and repair info:
UK • Europe • Asia-Pacific • USA •
Canada • Middle East and Africa
Elsewhere: Click here, select your country, go to the support section, then select repair.

Similar Messages

  • Im trying to update, but all it does is backup my phone, My itunes is updated, BTW, I just went to Apple bar, i had previous problem with prior phone, now im having this update  problem with thyis new phone, someone HELP!!

    Im trying to update, but all it does is backup my phone, My itunes is updated, BTW, I just went to Apple bar, i had previous problem with prior phone, now im having this update  problem with thyis new phone, someone HELP!!

    Same here and this is driving me crazy. I can buy, but can't upgrade. Grrr.

  • TS1398 Does anyone know when apple is going to fix the problems their latest update caused with iphone 4s and wifi????

    All the sudden, as i've read many other's have experienced, I can no longer connect to wifi in my own house with my iphone4s.  Nothing goes to the cloud. No matter what I've tried to fix it, nothing.  Any idea when Apple is going to get their act together and get another update to fix the last update????  Anyone have any luck fixing this - it's not a wifi problem.  It's an Apple issue, it was introduced to the device on their last update - what in the world are we supposed to do to fix it?

    I've been on the new IOS since it was released, and have no problems with wifi.
    To double check your trouble shooting look at the links
    troubleshooting wifi  http://support.apple.com/kb/TS1398
    reset network connection http://www.apple.com/support/iphone/assistant/wifi/#section_5
    wifi greyed out http://support.apple.com/kb/TS1559

  • Latest iTunes update problems with repeated error messages every 65 seconds??

    After this mornings' update of iTunes.  Problems with Applemobiledeviceservices.exe.  Error message every 65 seconds - software exception (oxc06d007e) occurred in the application at location 0x7c812fd3.
    How do I stop this?

    'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
    That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
    XP instructions in the following document: How to perform disk error checking in Windows XP
    Vista instructions in the following document: Check your hard disk for errors
    Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

  • IOS 7.1 Update problems with text and imessage

    SInce I did the latest updates I've had problems with my text and iMessage. First I've never used iMessage in the past and always got my text messages and sent text just fine. Now it seems at though I can only have one or the other. If I have friends using iMessage and I have my iMesage turned off they wont get my message and if I have my iMessage turned on and I send to someone with and android they wont get my message either. It's like it can't figure out if it's and iMessage or a normal text. I have it set to send as SMS when iMessage is unavailbe but it doesnt sent as a text message.
    So at this point I wont be ablet to get my messages from both iMessges and SMS..
    Anyone else have this problems.

    Hello crissyanon,
    The following article provides some useful information and troubleshooting steps that can help get Messages working.
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Cheers,
    Allen

  • Update problems with itunes 10.6.1 on xp

    When I try to update to iTunes 10.6.1 n Windows XP sp3 I get the dialog box to repair or remove. If I select repair the update fails. Any ideas on how to correct this issue?

    I have an old macbook too.
    It seems like Apple writes new software that makes older computers not work as well.
    I always have reservations about updating with an older model.
    Does anybody else have any problems with the new iTunes?
      Model Name:          MacBook
      Model Identifier:          MacBook4,1
      Processor Name:          Intel Core 2 Duo
      Processor Speed:          2.4 GHz
      Number Of Processors:          1
      Total Number Of Cores:          2
      L2 Cache:          3 MB
      Memory:          2 GB
      Bus Speed:          800 MHz
      Boot ROM Version:          MB41.00C1.B00
      SMC Version (system):          1.31f1
      Serial Number (system):        
      Hardware UUID:        
      Sudden Motion Sensor:
      State:          Enabled

  • Why doesn't FF make the latest Update compatible with a Power PC G4?

    I've got a Power PC G4 Mac, which apparently doesn't meet the System Requirements for the latest Update of Firefox: why not? In this Economy, I'm sure there are a lot of people like me still running Power PC's, yet now I can't even "suggest" to FF that they include us in the Update, because I "don't have the latest version"! I run my whole Office from my Mac, so it's still pretty darn good. What's with the disrespect?

    Firefox 4 and later require at least OS X 10.5 and an Intel Mac.
    *http://www.mozilla.org/firefox/10.0/system-requirements/
    For an unofficial Firefox 10 compatible version (TenFourFox) that runs on PowerPC Macs with OS X 10.4.11 or OS X 10.5.8 you can look at:
    *http://www.floodgap.com/software/tenfourfox/
    *http://www.macupdate.com/app/mac/37761/tenfourfox
    *http://code.google.com/p/tenfourfox/wiki/ReleaseNotes100
    *http://code.google.com/p/tenfourfox/wiki/PluginsNoLongerSupported
    *http://code.google.com/p/tenfourfox/wiki/AAATheFAQ
    Firefox 3.6.26 has been released, so you can update to that version.<br />
    Latest Firefox 3.6.x (Mac OS X 10.4 and later) can be found here:
    * http://www.mozilla.com/en-US/firefox/all-older.html

  • OS update problem with BB Torch 9810

    Hi there
    I've got a problem with my BB device. It is Torch 9810 and recently a software patch has been applied ( version 7.0.0 bundle 1465 to bundle 2406 ). After the upgrade though BB device doesn't work properly, its screen freezes, some applications ( GPS in particular ) does not work, virtual keyboard sensitivity is poor etc. Hence I need to roll back to the previous version of software however rollback option on device is disabled. I can't roll back to the previous version using desktop software either.
    Please advice how to resolve the issue or provide me with a link where I can find previous OS version i.e. 7.0.0 bundle 1465.
    Regards,
    Krum Garkov

    Hi kgarkov and welcome to the BlackBerry Support Community Forums!
    Plug your BlackBerry® smartphone into your PC and go to www.blackberry.com/update.  When prompted to do the update, click on View Other Versions to choose an older version of software to install.
    Thanks
    -CptS
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • Since LION update problem with iphone syncronisation

    Since the LION update on our macbook we have problems with the iphone syncronisation, reset the iphone has not solve the problem - what ist the mistake?

    What worked for me was not on the Apple troubleshooting list. I tried the whole list.
    First, I reset the phone. (Reset the iPhone by holding the sleep/wake button at the top right of the device and the home button at the bottom center of the face at the same time. Hold them both until you see the screen go black and the white Apple logo appear. When this happens, you can let go - the iPhone is rebooting.)
    Second, I restored the phone.
    I could not restore the phone until I reset it.
    Good luck.

  • 2.3 Update:  Problem with AppleTV learning third-party remote

    Hello,
    I'm trying to set up my third party remote (DirecTV HR21) after updating to 2.3. It all starts well; I go to Settings -> General -> Remotes -> Learn Remote, but I am having an issue when I am making my Apple TV learn the second key (down arrow); I get the error message "apple tv has already learned this button". It's as if the Apple TV thinks the 'up arrow' and the 'down arrow' on my remote are the same key. I tried several times, to no avail.
    Anyone else having this issue?

    I'm experiencing the same problem with the current DirecTV remote not being able to learn more than the first button prompted to enter (arrow-down). The error message "appletv has already learned this button" appears when attempting to enter the second button prompted (arrow-up). Furthermore, I have attempted configuration on two separate DirecTV HR21 remotes in both AV1 and AV2 modes.
    Come on Apple -- don't tease us! Testing wasn't done to make sure AppleTV can learn to respond to a current DirecTV remote? Yikes. I wonder what 3rd-party remotes were tested and confirmed to work.

  • Update problems with Adobe Flash Player preinstalled via Chrome. Can any one help?

    Dears, I am using the Chrome and it says it has installed the Adobe Flash Player and the auto updater. I selected to be advised every time an update is available, before it gets installed. During the start up of my Windows system (i.e. the "autoexec" run) the Flash Player auto updater  sometimes indicates there is an Adobe Flash Player update to be installed. Most of the time it is indicated BEFORE the autoexec finishes its sequence and thus still do not have an internet connection perfectly set up. At this point in time the adobe flash player auto updater window indicates there is an error and asks me to retry. Normally I wait a few seconds so the Autoexec run is finished and retry again. Most of the time the adobe flash player auto updater window indicates a second error message, claiming there is still an error. I have already attempted to connect the internet again and normally I am successful, indicating there is NOT a problem with the internet connection. At this point I give up trying to update the Adobe Flash Player and close the window. Can someone give me some light on how to fix this????

    The Adobe Flash Player updater DOES NOT update the PepperFlash plug-in in Chrome. Chrome uses a PPAPI plug-in and Adobe ONLY updates the NPAPI plug-ins for IE and other browsers. You can ONLY update the PepperFlash plug-in for Chrome by updating Chrome. The PepperFlash plug-in is a separate file in a separate folder location.

  • Safari update - problem with magic mouse

    Hi all, I recently installed safari update to 5.1 (6534.50) on a mabbook pro OS X 10.6.8. Ever since update, I've been experiencing the problem with safari reloading pages and kicking me out of websites that use flash player (back to log-in screen). I can deal with that by using another browser, however the update has really messed up my magic mouse. At first, every time I put my macbook to sleep or shut it off, the mouse would stop responding when I woke the mac up. I would have to disconnect the mouse and reconnect. But this was really eating up my batteries, so this morning I shut the mouse off when I put the mac to sleep. Now it won't connect at all. Anybody have any suggestions? Thanks in advance for your help!

    Thanks Carolyn and Barry,
    I did what Carolyn suggested - moving the .plist file into the trash. I have not resetting the PRAM or SMC yet.
    When I go to system preferences>Bluetooth, I get a screen that says:
    Bluetooth power is off. To use Bluetooth, first you must turn it on. (Note - my mouse is turned on)
    Both ON and DISCOVERABLE are checked.
    In the middle of the screen, it says No Devices (Set Up New Device...)
    When I select set up new device, it finds my device and attempts to pair but is unsuccessful.
    Resetting the SMC and PRAM scares me. After reading the links that Carolyn provided, I remembered another weird issue I had with my mac shortly before the update and mouse issue. For some reason, my clock suddenly became out of sync and I was on a 2000 date. I got an error message and reset the clock manually. Could this be the cause of my mouse issue? I feel like every step I've taken to get my mouse working again has made the problem just a little bigger!
    Thanks again for helping me!
    Judy

  • Experimented: iPS with latest update "conflicts" with Intel Mac mini

    Hello everyone.
    Please see my earlier post first as "background story":
    http://discussions.apple.com/thread.jspa?threadID=602573
    So I have 2 1Gb iPod Shuffles, one mine, one my sister's. My sister's, the 1st time I plugged into her new Intel Mac mini, it asked for an iPod Update, I clicked "Yes" and proceeded with the update.
    After that, I set the iPS with Disk Mode, it appears on the Desktop, when I launched or inside iTunes, once I hit the "Autofill" button, the shuffle unmount and disappear from the desktop immediately, leaving behind a 'warning message' with red exclamation mark, the same when you pull out a thumb drive or turn off an external drive, without unmounting them first.
    My own shuffle, I did not apply the latest iPod Updater
    When I bring the 2 iPS to my own iMac G5, both with same settings (Disk Mode etc) mounts perfectly on the Desktop, inside iTunes, I can 'Autofill' BOTH shuffles.
    When I plug my non-updated shuffle into my sis's Intel Mac mini, it mounts nicely, and when hit with Autofill, it does so nicely without "self-unmounting" at all.
    So in the end? I swap my shuffle with my sis, and make sure she never ever update the shuffle, at least for the time being.
    So what does this show?? That the iPod shuffle with the latest update may have a conflict of instability with Intel-based Macs??
    Thanks and cheers

    Hi Howwow,
    To add a detail: my updated Shuffle works like a charm on my old iBook and not on my new Intel MacBook. So I am convinced it is in the Shuffle/Intel combination. I did try undoing the update on the shuffle (reverting back to 2005-11-17), but that made no difference on my Intel MacBook.
    Regards

  • Update Problems with Adobe, Win 7, 64 bit, Event Viewer confused

    When I looked into the Event viewer, I noticed that their seem to be problems with AAM.  I only have Adobe Elements, Acrobat Reader, Adobe Flash Player, Adobe Air, etc.  AAM does not list any of the products I have, but a lot of stuff, that is far too advanced for me.  I am wondering, what to do about it.  Helga P.S.  I had to pick one of the Forums.

    Is there a task that you are unable to do?
    The Adobe Application Manager is a part of CS5 and CS6.  My copy of it also lists several packages I don't have installed with a [Try] button to the side.
    Perhaps re-installing with the latest would help?
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=4773
    Roy

  • 4.1 update - problems with stereo connectivity

    I have a high end audio system in my car... Focals, w7, etc etc. It is ran by a avhp3100dvd. Since I updated my iphone4 to the new 4.1 OS, I get random static through the audio system. It is sporadic, lasts 3 to 4 seconds, goes away, and then comes back. It worked earlier today before I did the update. My itouch works fine, so I know it isn't the radio. I restored the iphone4 AGAIN (a clean restore btw, so I just spent an extra hour organizing my iphone again) just to see if the upgrade was corrupted somehow. I still have the same issue. The phone plays like normal with headphones, it is just when the iphone is synced to the radio.
    I have seen numerous complaints about the new OS not being compatible with radios after updates. I was very hesitant to purchase the iphone4 because of this, but I tested it before I bought it, and everything worked with 4.0. That is the ONLY reason I purchased the iphone4. I felt like apple forced 3g customers to upgrade after the 4 update made them unusable. 3g phones need to be fixed with the new operating system and PLEASE FIX connection problems with other devices.
    It doesn't make sense why an update would mess up connection capabilities with other devices (isn't that a step backward?). The reason why I have purchased apple devices (iphones, macbook, itouch, ipad) is because they typically just work. That hasn't been the case lately. Thanks for reading my rant

    Thanks for the rant but it's probably better to contact Apple about this. We don't work for them.
    Regards

Maybe you are looking for

  • How can I make my XSLT processor accept html code ?

    In my applications the Oracle xslt processor wont accept simple HTML tags within an XML source while transforming the source into HTML. Both processors either will throw parser exceptions or ignore the HTML code in the XML source completely, though o

  • Why do I get an error 1000 when using vi server with invoke nodes?

    I use the invoke nodes with set control value and run vi. I want to use the called vi on the same machine and in parallel and I do not want to wait until it is done. If I set wait until done to true it works, if I set it to false I get the error mess

  • Slideshow at 16x9, but Slides Are 4:3!

    My slideshow works fine on my PC. All the slides are 4:3 and show very well on my PC screen. However, when I try the slide show on my TV (Samsung 55in, 1080i), all the slides are shown in 16x9 size. What is wrong here? Why doesn't the Media Manager r

  • Growl and Mountain Lion

    This is not really a question. It's a piece of information that I'd like to share over here in case somebody had the same problem on his/ her iMac: I had an issue with one of my external USB HD not ejecting when I wanted it to. After lots of investig

  • Meeting hosting through sharepoint

    Hi, i want to enquire can i hoast meetings using sharepoint as it is done in outlook. if so can anyone share how to do it. i have a mvc application in which i want to have this feature. like separate optin for meetings like in outlook