HT1414 mi IPAD quedo prendida y no puede apagarla de ninguina manera?

Como puedo apagar el ipad quedo bloqueada ningun boton ni la panatalla funciona?

Sospecho por el número de personas que tienen este problema y el de los términos y condiciones de iTunes que hay algún problema o tal vez mantenimiento en curso en los servidores de Apple. En ese caso hay que esperar unas horas y se arregla, si no es eso, ni idea.
EDIT:
Parece que tenía razón:  http://www.macrumors.com/2012/09/30/widespread-itunes-and-app-store-terms-and-co nditions-bug-preventing-new-purchases-and-downloads/

Similar Messages

  • La ipad quedo con un signo de luna en el costado superior derecho y no responde

    la ipad quedo con un signo de luna en el costado superior derecho y no puedo utilizarla. la pantalla quedo visulaizando la ultima imagen, pero no responde. Solo permite trabajar en SIRI

    Lee estos articulos y siguie los pasos:
    iOS: no se puede actualizar o restaurar
    http://support.apple.com/kb/HT1808?viewlocale=es_ES
    iOS: El dispositivo no se reconoce en iTunes para Windows
    http://support.apple.com/kb/TS1538?viewlocale=es_ES

  • Ingrese de forma errada mi codigo de acceso al ipad, ahora me sale el siguiente mensaje de error ""Es Necesario Sustituirlo".  Este ipad debe sustituirse porque no puede completar el proceso de activacion

    Hola, Ingrese varias veces en forma errada el código de acceso al iPad, ahora me sale el siguiente mensaje "ES NECESARIO SUSTITUIRLO".. este iPad debe sustituirse porque no puede completar el proceso de activacion

    has podido arreglarlo al final?, estoy experimentando el mismo problema exactamente, he intentado de todo y nada funciona, hasta contacte con el servicio de atención de la empresa proveedora del servicio e insisten en que es problema del dispositivo aunque sin cambiar nada en la configuración funciona sin problema en otras redes. Ha decir vedad ya no se que intentar.
    ipad 4, ios 8.1.2

  • Hola, me gustaría proponer que para poder apagar nuestros equipos, ipad, iphone tengamos que poner nuestro ID, de esta manera si sufren robo, el ladrón no los pueda apagar, y nosotros los podamos localizar.

    Hola, me gustaría proponer que para poder apagar nuestros equipos, ipad, iphone tengamos que poner nuestro ID, de esta manera si sufren robo, el ladrón no los pueda apagar, y nosotros los podamos localizar.

    Sorry, you are in the wrong place to post but your idea is a good one. It will get noticed if it is posted in the right place.
    Lo siento, estás en el lugar equivocado para publicar pero tu idea es buena. Será notado si es publicado en el sitio correcto.

  • Mi iPad quedo con la pantalla en negative, que puedo hacer para recuper su images?, Mi iPad quedo con la pantalla en negative, que puedo hacer para recuper su images?

    Que puedo hacer paravolver a la pantalla inicial a colores de mi iPad, quedo en negative, predomina el color naranja

    Tiene que apagar el modo negativo. Para ello, abra Ajustes > General > Accesibilidad, y desactive "Invertir colores"

  • Necesito saber si al encender un Ipad "por primera vez" se pueda hacer que se reproduzca un video institucional automáticamente

    necesito saber si al encender un Ipad "por primera vez" se pueda hacer que se reproduzca un video institucional automáticamente

    Bueno, no las puse en su momento pero ahora sí las pongo:
    15), 16) y 17) 3 ERRORES MÁS EN 3 INTENTOS, FALLIDOS, DE COPIAS DE SEGURIDAD UTILIZANDO TIME MACHINE...
    Así que desisto de hacer más copias de seguridad...
    Los datos que pueda archivar y pierda a partir de ahora, esas pérdidas, las voy a responsabilizar a Apple, ya que es un producto suyo, Time Machine, el que no me permite realizar copias de seguridad (hasta las copias de seguridad que me permitió hacer antes de las dos reinstalación del Leopard Original,10.5.4 en mi iMac 8,1, han fallado estrepitosamente, además de haber hecho desaparecer datos muy valiosos para mí).
    Insistiré hasta la saciedad: MI IMAC 8,1 Y OSX LEOPARD LLEVAN YA CASI 3 MESES IMPIDIÉNDOME AVANZAR EN MI TRABAJO LITERARIO, MUSICAL Y FOTOGRÁFICO.
    NOVO PINTO (compositor/productor/escritor/fotógrafo freelance e indignadísimo).

  • HT1414 my ipad 3 got truble while updating. there is showing conect to itune while i try to switch on. please let me knwo what is the solution to recover my ipad to previuos stage?

    my ipad 3 got truble while updating. there is showing conect to itune while i try to switch on. please let me knwo what is the solution to recover my ipad to previuos stage?

    That image on the iPad screen is telling you what to do. Connect the iPad to your computer and use iTunes to restore the iOS software. You said it yourself, something went wrong. So now you have to restore the device.
    The instructions for restoring the iOS are in this kb article - the article from which you posted your question.
    http://support.apple.com/kb/ht1414
    Make sure that you read all the way to the end under "Additional Information" where it talks about using recovery mode. You just might need to use that in order to restore.

  • Mi ipad quedo trancado no apaga ni prende pero quedo con la señal de que esta  trabajando y no se que hacer

    Mi ipad 2 quedo trancado y no prende ni apaga quedo con la señal de trabajando encendida

    it's most likely a hardware issue that needs repair. D you have a backup ?
    Try this: http://support.apple.com/kb/HT1430?viewlocale=es_ES   <==== Español !!!
    If that doesn't solve the issue, you could also try backing up the device and restoring the device as new.
    In that case, follow the steps in: http://support.apple.com/kb/HT4137?viewlocale=es_ES  <==== Español !!!
    NB: set up as a NEW device because a software issue will be in the backup. If the issue persists after restoring as new, you should offer the device for service.
    If you're not able to restore the device, this one might help: http://support.apple.com/kb/HT1808?viewlocale=es_ES <==== Español !!!
    Using his article will erase everything on the device, so make sure you have a backup!
    Good luck

  • MI IPAD QUEDO LA PANTALLA ECHO NEGRA Y ASUL QUE PUEDO ASER

    HOLA ME pueden ayudar con mi ipad que se quedo prendido pero con la pantalla echo negro

    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • HT201210 el ipad quedo bloqueado, esta pegado.

    Estaba actualizando mi ipad versión 4,3 con el ios5.1 me aparecio error 1602 y el ipad se bloqueo, aparece la manzana en modo pensando, se quedo pegado no responde nada, no arranca. Que hago?

    Haz encontrado aluna solución?

  • El ipad con movil no activado puede tener WhatsApp? y si es así, cómo se descarga??

    Puede usarse el WhatsApp en un Ipad con móvil sin activar?? y si es así, cómo se descarga en el Ipad?      Gracias

    En teoría se tienen que poder todas, porque son compatibles 100%

  • Mi ipad quedo negra y no funciona no responde

    mi ipad mini quedo sin funcionar, la pantalla negra y los botones no responden

    Did you already try to reset the iPad by holding the sleep and home button for about 10sec, until the Apple logo comes back again?
    If this doese not help, try to connect in recovery mode, explained in this article:
    iOS: Not responding or does not turn on

  • HT1414 My Ipad 2 will not update to ios6. Instead, it had an unknown error. Then it went into restore mode 2 times. :( I have two iPads, both have been really problems.

    I was on line 4 hours last night. So far two  hours tonight with the second iPad. This one downloaded quickly, when throught the entire upgrade, then at the end said there was an unknown error. I did what iTunes said to do and restored the iPad. It went through the restore and at the end said the restore failed. Then it said to restore again. I did....same problem

    I'm experiencing the same problem.
    Whenever the itunes usb lead screen disappears and the apple logo appears it fails to reboot.
    It's getting power ok, it's just not doing anything.
    If I can't get an answer here it's a visit to the apple shop tomorrow.

  • HT1414 My ipad has gone into recovery mode after an "error occured" whilst trying to update it. Will it come out of recovery on its own? There is a lot of data I want to save

    My ipad has gone into recovery mode after an "error occured" whilst trying to update it. Will it come out of recovery on it's own? There is a lot of data I want to save before restoring it to factory settings

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.

  • HT1414 My ipad has locked-up, it has frozen while running an app, and will not respond to any button,  what do I do?

    My ipad has locked-up, it has frozen while running an app, and will not respond to any button,  what do I do?
    It simply stays on the same screen image, and does not respond to anything.  When I plug it into itunes, there is no indication of its presence.
    The ipad's clock has also stopped.
       eek

    Try a reset:
    Hold the Sleep and Home button down for about 10 second until you see the Apple logo.

Maybe you are looking for

  • Changes r not reflected in delivery address

    when i am changing Delivery address for a PO in me22n manualy, changes are not reflected in print preview. the smartform is copied from standard         /SMB40/MMPO_L to get the Delivery address i m using below code: IF is_pekko-werks NE space.   PER

  • User 2 photo library has become unreadable

    I am the adminstrator of our iMac. My wife is the other user and when she tries to access her photo library a message appears: "photo library has become unreadable .." Does anyone know how to resolve this?

  • With holding tax base amount not picked correctly.

    HI While calculating WHT  we have 2 problems. 1) The wht base amount is updated 4 times in all tax type i.e Basic ,Surcharge, cess and se-cess. (upto Sep 09 postings) Example My vendor inv for Rs.540279 i have to deduct 2.266% WHT Display withholding

  • How BPEL refers to human task form application during runtime ?

    Hi All, I have worked on coulple of 10g BPEL human tasks and I remember '.tform' file used to capture task display jsp application url content of tform file <template>${http_url}/${domain_id}/BPEL_PROCESS/1.0/Task Form/Task Form.jsp</template> I am l

  • Batch processing and rendering multiple clips in SpeedGrade CC?

    I'm new to SpeedGrade CC, just watched 2 hrs of Lynda training, and I'm just about ready to go. Before people jump on my question, let me walk through what my indended use will be. Unlike most of the content / workflow that was discussed in the train