HT1414 my i pad is disable because i forgot passcode

i need to enable my ipad

If you've forgotten the passcode then you will need to connect the iPad to the computer that you normally sync to and you should then be able to reset the iPad and re-sync your content to it (http://support.apple.com/kb/HT1212) - you may need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808
If you do it via a different computer then :
If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.

Similar Messages

  • HT1414 my i pad is disabled because i forget the password

    my i pad is disabled because i forget the password

    How do we know that you don't have a stolen iPad?

  • I pad is disabled because of wrong passcode

    My I pad is disabled because of the wrong password entry. I tried the reset following the tips on the technical support page but no lock. I tunes gives me the same air messages like " you need to enter your password on I the pad " but I can get the home page turn on to do that.

    Place the iPad in Recovery mode and restore via iTunes.

  • My ipod touch is disabled because i forgot my password, it won't connect to iTunes because it wants my password, what do I do? Thanks

    My ipod is disabled because I forgot my password and now it won't connect to iTunes because i don't know the password. the apple store said connect to itunes and follow the prompts but it's not happening. can anyone help me please? Thank you.

    Connect the iPod Touch to your iTunes library in Recovery Mode using the instructions in this Apple support document.  Then restore it to factory settings.
    http://support.apple.com/kb/ht1808
    B-rock

  • HT1212 I did not sync my iPad to iTunes on my PC. Now my iPad is disabled because I forgot my passcode when I set up iOS 7 on it. I have tried to use the support info from Apple AND the cut and paste responses from people in the community, but it does not

    I did not sync my iPad to iTunes to my PC. Now my iPad is disabled because I forgot my passcode when I installed iOS 7 to it.
    Before anyone cuts and pastes the info from Apple support in response to this, I have already tried those steps. iTunes simply states that it cannot do anything since the iPad is locked with a passcode. I cannot access iCloud to use that specific advice as iCloud will not let me sign in; a message keeps coming up reading that there is an error with the server. Remote Swipe? Not sure. It is three hours later, and I am no further.
    What else can I do? I never had a passcode set up when I first got my iPad. I would have bypassed this with the installation of iOS 7 if I had known about this.
    Thank you in advance.

    You can only play 720p video.
    Download the 720p or standard def version.

  • HT201263 Hi, my iPhone 5s was disabled because i forgot my passcode. I was relying to 3 finger prints that I was saving before. I didn't know that passcode is required when the phone restarted. So I follow every single steps to recover

    Hi, my iPhone 5s was disabled because i forgot my passcode. I was relying to 3 finger prints that I was saving before. I didn't know that passcode is required when the phone restarted. So I follow every single steps to recover my iPhone using i tunes.
    Suddenly an iTunes pop up a message "that I must respond to iTunes on my phone, so that the computer could have access to the phone".
    HOW COULD I RESPOND ON MY PHONE WHEN I WAS DISABLED ALREADY?
    IS THERE ANY BUTTON TO BE PRESS AS CODE COMBINATION THAT STANDS AS MY RESPOND TO ITUNES?
    <Edited by Host>

    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Forgot passcode or device disabled
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:                                                             
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes       
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:           
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.
    If you previously synced to the computer then you may be able to recover use of the iPod without erasing the iPod by following the instructions here:
    Disabled Recovery-must use syncing computer.
    For the future, this is the iPod touch forum

  • TS2446 My account was disabled because I forgot my security question answers how do I fix this problem?

    My account was disabled because I forgot my security question, how do I fix this problem

    Click here and request assistance.
    (74911)

  • My ipod was disabled because i forgot my password. I cant use my itunes...what should i do.

    Its a third generation. Disabled because i forgot my password. I cant connect to itunes on my  computer....how can i get into it?

    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps...

  • My icloud id has been disabled because i forgot my password now i cant start my phone. plz help me

    my icloud id has been disabled because i forgot my password now i cant start my phone. plz help me

    Locked Out, Forgot Lock or Restrictions Passcode, Need to Restore Your Device: Alternative Solutions
        1.  Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support
        2.  Use iTunes to restore your iOS device to factory settings - Apple Support
        3.  About Restrictions (parental controls) on iPhone, iPad, and iPod touch - Apple Support
    If all else fails: Place your device into recovery (DFU-Device Firmware Upgrade) mode:
    Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
       1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
           other end of the cable connected to your computer's USB port.
       2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
           until the red slider appears, then slide the slider. Wait for the device to turn off.
                  * If you cannot turn off the device using the slider, press and hold the
                    Sleep/Wake and Home buttons at the same time. When the device turns off,
                    release the Sleep/Wake and Home buttons.
      3. While pressing and holding the Home button, reconnect the USB cable to the
           device. The device should turn on. Note: If you see the battery charge warning,
           let the device charge for at least ten minutes to ensure that the battery has some
           charge, and then start with step 2 again.
      4. Continue holding the Home button until you see the "Connect to iTunes" screen.
           When this screen appears you can release the Home button:
      5. If necessary, open iTunes. You should see the following "recovery mode" alert:
      6. Use iTunes to restore the device.
    If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

  • My iphone 6 is disabled because of incorrect passcode but my apple account isn't activated yet so I cannot reset via itunes

    My iphone 6 is disabled because of incorrect passcode and i cannot reset via itunes because i have not yet activated my apple account.

    +Do a DFU recovery:+
    +1. Open iTunes.+
    +2. Connect the iPhone+
    +3 Press both the home and sleep/wake buttons until the Apple icon appears (ignore the red slider if it shows).+
    +4. Continue pressing the home button alone until iTunes sees your phone in recovery mode.+
    +5. Follow the prompts to restore the iPhone.+
    If not, take it down to mobile dealers that can reset your phone for you. All data will be lost.

  • I keep trying to reset an icloud account that is disabled because I forgot the password but is not able too. I tried changing it but there seem to be some mix up in the icloud ID and the gmail email address. HELP PLEASE!!

    I keep trying to reset an icloud account that is disabled because I forgot the password but is not able too. I tried changing it but there seem to be some mix up in the icloud ID and the gmail email address. HELP PLEASE!!

    Your password was sent to your emergency email address.  Perhaps you have an email you never use?   I use the free email from my cable TV account as my emergency email.
    Your Apple account and cloud account are separate.   You could even have completely different user and password.   Most of us use the same user ID and password, but they are not the same thing, don't mix them up.
    If you can't retrieve emergency email, you will have to call apple support.
    http://support.apple.com/kb/HE57

  • Hello! my ipad is disabled because i forgot my password. when i tried to restore it, it says that i should turn off find my ipad in my ipad's settings, but how can i turn it off if it is disabled, please be responsive enough.

    hello! my ipad is disabled because i forgot my password. when i tried to restore it, it says that i should turn off find my ipad in my ipad's settings, but how can i turn it off if it is disabled, please be responsive enough.

    hello! my ipad is disabled because i forgot my password. when i tried to restore it, it says that i should turn off find my ipad in my ipad's settings, but how can i turn it off if it is disabled, please be responsive enough.

  • My i pod is disabled because i forgot my password, do i have to restore my i pod because i dont want to loose all my files, is there any other options?

    my i pod is disabled because i forgot my password, do i have to restore my i pod because i dont want to loose all my files, is there any other options?

    Maybe a data recovery company can help. Otherwise you will have to erase the iPod tn order to regain use of the iPod. You can also restore from your last backup. The Disbled is a good security feature.
    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up     
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        

  • HT1212 my daughter's ipod touch has been disabled because she forgot the password. It also says it cannot connect to itunes because it's been disabled. How do i just erase the ipod totally so we can use it again?

    My daughter's ipod touch has been disabled because she forgot her password. It also will not connect to itunes because it's been disabled. How can I just erase or reset the ipod so she can use it? We don't mind if the info. on the ipod is lost.

    Hi Guys,
    I havent touched my Iphone 4s in ages (about a month). I came back to it the other day. I forgot the password, so naturally it disabled it and is telling me to connect to iTunes. In the meantime, i had got a new computer and didnt back up the itunes files (because im an idiot). So now when i connect it to iTunes it tells me to verify it on the phone, but i cant get in there because it is disabled. PLEASE SOMEONE HELP!!! I HAVE NO IDEA ON HOW TO FIX IT!! I've tried to restore it, I've tried to jailbreak it. NOTHING works!! PLEASE HELP!!!

  • My ipod touch power button is broken and it is disabled because I forgot my password

    My ipod touch power button is broken, and it is disabled because I forgot my password....any ideas??

    Use this program to place the iPod in recovery mode and then restore via iTunes.
    RecBoot: Easy Way to Put iPhone into Recovery Mode

Maybe you are looking for

  • 1st Generation 2GHz G5 & Web Cams

    I have a G5 dual 2GHz Tower from I think 2003 or so. Just purchased a Creative Live! Optia AF Web Camera. It seems to work with all my applications but not sure it is 100% in terms of speed. I believe my G5, all 3 USB ports should be USB 2.0. This ca

  • Since ios 7 problems with bought videos

    Hi, since the ios 7 is not possible to start the movies. Ther It comes only ... Movie is not loaded! ( german : Video ist nicht geladen) But the icons are still there. I have had bad 300 km on german Autobahn, because of the missing entertainment for

  • How to configure WL 10.3 to used log4j instead of jdk logging

    Hi, How can I configure WL 10.3 to use log4j instead of jdk default logging. I did changed the logging to log4j through the console for the AdminServer and one of the Managed Instance. I try to deploy axis2.war but it fails and complains about apache

  • Enlarging Pattern in Pattern Maker Help

    I have zero experience with the following: I have a pattern (link below) that I want to increase to cover a larger sheet of paper. I have tried reducing to just four 'flowers" (the original pattern) using the Offset method andI have also manually tri

  • SCXI 1520 Simultaneously sampling

    Hi there, for my application i need to read simultaneously all the channels from 2 SCXI 1520 modules. (2 x 8 = 16 channels) The control module will be SXCI 1600 and the  software  -  Signal Express. Is this possible ?