HT1414 My iPad does not automatically update the operating system. Under the general tab in settings there should be Updates, but there isn't. Advice plz?

My iPad does not automatically update the operating system.how can I accomplish this?

Your post says you are on iOS 4.3.2. You need to be at least at iOS 5 to have a "Software Update" capability on your iPad. Right now, you need to update your iPad using iTunes on your computer.
Plug your iPad into iTunes (current version: 11.0.4). Let it sync. Then choose "Check for Updates" from the iPad's summary page in iTunes.

Similar Messages

TS1398 Ever since the last update, my IPad does not automatically get connected to our WiFi. Never had any problems until this last update. Is there any repair?? Its going on 2 years old and does not use the

If I go into settings and physically touch the WiFi that has been used since his was new than after waiting for 2 to 3 min it finally goes on line. I never had any problems until this last update. It always went on line automatically with out having to go into settings. Just a pain. Once I do this it usually stays on line.

Tap Settings > General > Reset > Reset Network Settings
You will have to re enter your Wi-Fi password.
If that didn't help, try here > iOS: Troubleshooting Wi-Fi networks and connections

My iPad does not automatically shut off after several minutes of non use. I can shut it off with the on/off switch. What can I do to get the auto sut off feature back?

My IPad does not automatically shut off after several minutes of non use as it had been doing a few days ago How can I restore this auto feature?

Settings>General>Auto-Lock and select an Auto-Lock time (the "Never" setting will of course never auto-lock the device)

SCCM 2012 - Adding Operating System Installer (The specified path does not contain a valid operating system ..)

I have encountered the dreaded "The specified path does not contain a valid operating system or you do not have permission to access it. Specify a valid path" message that seems to be popular in many forums .... BUT, so far none of the "solutions"
have fixed the problem (of I don't understand the fix)
Configuration
SCCM 2012 SP1 5.0.7804.1000
WADK 8.100.26629.0 < Suggested Fix
Server 2008 R2
SCCM Administrator with UserID = SCCMAdmin
Steps / Fixes I have followed
I have configured a administrative share
\\caleb\sources$ to hold directories (such as Apps, Drivers, and OS) with the following NTFS Permissions
EVERYONE has Read and Execute, List folder, Read permissions<o:p></o:p>
SYSTEM has Full Control
<Suggested Fix
SCCMManagers (our group that has all SCCMManagers) has Full Control<o:p></o:p>
SCCMAdmin (the SCCM Admin account that we are using to import image) has Full Control<o:p></o:p>
Local Administrators (the local machine administrator) has Full Control
<Suggested Fix
<o:p></o:p>
Another Fix is to explicitly grant all permissions to the SCCM Administrator
<Suggested Fix
>Administrative Users ...
Properties of the SCCM Administrator (for us that is SCCMAdmin) has all the boxes checked<o:p></o:p>
Another suggestion I was able to glean was to Specify the Network Access Account
so I configured SCCMAdmin as the Network Access Account.
Another potential fix is that the image ISO file that has been downloaded is corrupt.   So, I downloaded the Win 7 (and Win 8.1) ISO's from MSDN and did a Checksum check.
I then mounted the ISO (on 2008R2 I use VirtualClone Drive) and copied the contents of the image to
E:\Sources\OS\en_windows_7_professional_with_sp1_vl_build_x86_dvd_u_677896 for Windows 7 with SP1
To double check,
I computed the Hash on the Install.WIM located in the Sources directory and compared with
the computed Has Tag for the Install.WIM on the ISO Image ... and the Hash tag of the WIM's matched (extracted vs what is contained within the ISO)<o:p></o:p>
I tried to load the images into SCCM 2012 using the "Operating System Installers" option
UNC to installer
\\caleb\sources$\OS\en_windows_7_professional_with_sp1_vl_build_x86_dvd_u_677896
Then I receive the lovely message <o:p></o:p>
"The specified path does not contain a valid operating system or you do not have permission to access it. Specify a valid path"<o:p></o:p>
<o:p> </o:p>
From
C:\Program Files (x86)\Microsoft Configuration
Manager\AdminConsole\AdminUILog\SmsAdminUI.log<o:p></o:p>
<o:p> </o:p>
\r\nSystem.Management.ManagementException\r\nGeneric failure \r\n
at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus
errorCode)
   at System.Management.ManagementObject.InvokeMethod(String
methodName, ManagementBaseObject inParameters, InvokeMethodOptions options)
   at
Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlConnectionManager.ExecuteMethod(String
methodClass, String methodName, Dictionary`2 methodParameters, Boolean
traceParameters)\r\nManagementException details:
instance of SMS_ExtendedStatus
Description = "Failed to get the image property from the source WIM
file due to error 80070002";
ErrorCode = 2147942402;
File ="e:\\nts_sccm_release\\sms\\siteserver\\sdk_provider\\smsprov\\sspimagepackage.cpp";
Line = 586;
Operation = "ExecMethod";
ParameterInfo = "SMS_OperatingSystemInstallPackage";
ProviderName = "WinMgmt";
StatusCode = 2147749889;
\r\n<o:p></o:p>
What am I missing ???? I assume something simple but, darn I'm stumped!!!

Hi,
Configuration Manager version
Windows AIK or Windows ADK Version
Windows PE versions for boot images customizable from the Configuration Manager console
Supported Windows PE versions for boot images not customizable from the Configuration Manager console
System Center 2012 Configuration Manager with no service pack
Windows AIK for Windows 7
Windows PE 3
None
System Center 2012 Configuration Manager with SP1
Windows ADK for Windows 8
Windows PE 4
None
System Center 2012 Configuration Manager with SP1 and cumulative update 2
Windows ADK for Windows 8
Windows PE 4
Windows PE 3.11
System Center 2012 Configuration Manager with SP1 and cumulative update 3
Windows ADK for Windows 8
Windows PE 4
Windows PE 3.11 and Windows PE 5
System Center 2012 R2 Configuration Manager
Windows ADK for Windows 8.1
Windows PE 5
Windows PE 3.11
Please try to install the Windows ADK for Windows 8.
http://www.microsoft.com/en-us/download/details.aspx?id=30652
For more information, please review the link below:
http://technet.microsoft.com/en-us/library/gg682187.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

HT201263 Is the operating system on the original ipad update capable?

Is the operating system on the original ipad update capable?
My menu has no "Update OS" option, and no iCloud option.

The Software Update option (and iCloud) only appears when you have iOS 5+ installed, you will need to do the update via your computer's iTunes.
Connect the iPad to your computer's iTunes and copy any purchases off the iPad to your computer via File > Transfer Purchases (you may also want to copy photos off the iPad as well) and then force a backup of the iPad by right-clicking the iPad 'Device' on the left-hand side of iTunes and selecting 'Backup'. You may also want to copy off the iPad any important documents, notes, files etc e.g. via the file sharing section at the bottom of the device's apps tab when connected to iTunes, via wifi, email, dropbox etc - they should be included in the backup, but it's best to have a copy of them outside of the backup just in case.
You can then start the update by selecting the iPad on the left-hand side of iTunes, and on the Summary tab on the right-hand side clicking the Check For Updates button.
Updating to iOS 5+ : http://support.apple.com/kb/HT4972

MDT 2013 The source directory does not contain an identifiable operating system

Hi,
I am using MDT 2013 and I am trying to deploy server 2008 in it. I mount my 2008 iso file, import OS, then select full set of source files, and enter D:\ . It says, "The source directory does not contain an identifiable operating system". I am
sure that install.wim file is present in sources folder. What other folders/files does it need while importing OS?
Note: it is an customized OS. It has MS hotfixes and dotnet 4.5 installation package in it.
Chaitanya.
Chaitanya.

Hi,
I am using MDT 2013 and I am trying to deploy server 2008 in it. I mount my 2008 iso file, import OS, then select full set of source files, and enter D:\ . It says, "The source directory does not contain an identifiable operating system". I am
sure that install.wim file is present in sources folder. What other folders/files does it need while importing OS?
Note: it is an customized OS. It has MS hotfixes and dotnet 4.5 installation package in it.
Chaitanya.
Chaitanya.
This is expected behavior because Server 2008 is unsupported in MDT 2013:
http://deploymentresearch.com/Research/Post/330/What-if-I-told-you-The-OSD-Support-Matrix-for-MDT-and-ConfigMgr-is-here
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

I currently have a 1Tb HDD installed in my macbook pro and have just recently acquired a 120GB SSD. I want to put the operating system on the SSD so it boots quickly but keep the files on the HDD. How do I do this?

I currently have a 1Tb HDD installed in my macbook pro and have just recently acquired a 120GB SSD. I want to put the operating system on the SSD so it boots quickly but keep the files on the HDD. How do I do this?

i also contacted the company that sold me the battery and they offered me my money back or a new battery
Suggest that you take them up on their offer of a new battery. Make sure you got the right one for your model MBP.
2 separate MBP battery installation Articles:
1 -
MacBook Pro: How to remove or install the battery
2 -
MacBook Pro: How to remove or install memory
=================
Never post your email address in a public forum. Spam bots roam public forums looking for "spam victims".
If you insist on using your email address in a public forum & you want to "trick" the spam bots, then suggest that instead of using "@" in the email address, use instead the actual word AT.
Regarding responding to your emal addy, we ask that you post all questions to the appropriate discussion forum. This allows other users and other helpers to have a chance to view and respond to your post. That way, everyone benefits from the exchange.
Thank you
I have requested that a HOST remove your email addy.

Hello! I would like to download a trial version of Illustrator CC in English. How to do it? The operating system on the Russian.

Hello! I would like to download a trial version of Illustrator CC in English. How to do it?The operating system on the Russian.

open your cc desktop app>click the settings (gear icon) at the upper right>click apps>apps language.

Ipad does not automatically roll between networks

We have 2 iPads. One does not automatically choose whatever wifi network it is in even having been in it before, such as our home network. How do i fix that?

Hello there, VickFromTX.
A great resource is the following Knowledge Base article that helps troubleshoot Wi-Fi on an iOS device:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Alternatively, you can use one of our iPad Troubleshooting Assistants as well:
Apple - Support - iPad - Wi-Fi Assistant
http://www.apple.com/support/ipad/assistant/wifi/
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.

Leave the choice of the operating system to the consumer (Windows, Linux, no OS-)

I recently bought a new Acer laptop. I stopped using Microsoft Windows more than 10 years ago (I am a happy Ubuntu Linux user). However, when I bought my laptop, I was forced to buy it with Windows 8.1 pre-installed on it. I told the salesman I didn't need Windows 8.1 and even if it was pre-installed, the first thing I would do would be to format the hard drive and put Ubuntu Linux on it. In the end, I still had to buy it (and therefore buy a Microsoft product I will never use). I think it would be very beneficial for customers if they could choose the Operating System of their choice (or no OS at all) when buying a new computer. Of course you could still tell that the computer has been only tested and validated with a given version of an Operating System and that there will not be any technical assistance if another OS is used on a given computer. For information, in many countries in Europe, it's illegal to force people to get something when they buy something else. This is unfortunately still what is happening in 2014 in the laptop/desktop World because of Microsoft monopoly.

ML2014: I too would like to consider implementing UBUNTU on an old Acer portable with an AMD processor and a 60GB built in drive that has a known maximum address space of 2gb. It is currently using the Windows XP operating system it came with but in March 2014 Microsoft plans to discvoninue all support. Hopefully they will not take down the text archives on the corporte web, but I would not put it past them to perpetrate that crime. I'm a retired once certified Microsoft Professional that still has an identity on the web set up some years ago. (I forget how many) but Putting UBUNTU on an older portable like the one I have seems like a sensible option when compared to keeping it in a maintenance limbo. I sprang for a new LI-Ion battery for it last year and it is stable as a rock right now, but not used very much and I would like to put it in the hands of an Open Source based Non Profit I work with once it is properly set up and configured so that their one-year VISTA folks can have yet another computer to use in the field. It connects to the local urban free wireless internet and the password protected wifi server in the offices under Windows XP and I do not have a clue about UBUNTU, it would be a learning project for me. Have you come to a decision regarding UBUNTU for your portable. Mine is an ACER 5000.

Why I cannot upgrade the macbook 5.3 at the operating system to the latest version it seem to only go at 10.5 max

Why I cannot upgrade the mac book 5.3 at the operating system, the actual ver. 10.5 and cannot upgrade to a newer version

Forgot to mention that in order to upgrade to 10.8 you must first upgrade to 10.6.8. Get it here and then run software update to get access to the App Store http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard

TS2755 My IPad does not display (load) my email messages, only the titles

My email does not fully load content of each message, only the titles or subject of each message appears. What is causing this to happen and what can I do to correct this problem?

Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

HT1338 i need to update my operating system so the new version of itunes will install.

will install but system preferences is saying there is no updates available. What do I do?

Seems Fine...
.. so Contact Apple in your Country to Purchase a Snow Leopard Disc...
http://support.apple.com/kb/HE57
In the US...
1-800-MY-APPLE or 1-800-676-2775
Also consider putting the Maximum amount of RAM your Mac can handle...
See Here > http://eshop.macsales.com/shop/apple/memory/iMac
Installing RAM
Desktop http://support.apple.com/kb/ht1423
It is Important to get the Correct and Matching RAM

HT4623 I updated my operating system on the iPad and now when I try to enter iBooks it automatically reverts to the screen with all my apps. Also none of my books are on iBooks now.

I updated my iPad os and now my iBooks app automatically closes as soon as I enter and none of my books are on it.

Do a hard reset ie hold the power and home buttons simultaneously until the Apple logo appears (ignore the red slider).

My options menu does not have "Add a Device" link under the Sync tab, where do I find it?

I'm trying to set up sync between my PC and Samsung phone. I believe I have everything ready but I do not have an option to add a device in the sync tab in my options menu. Running 4.0b7, what am I missing...

1st screenshot - Firefox Sync. <br />
'''I already have a Firefox Sync account''' > '''''Connect'''''
Then you should see the 2nd screen. <br />
'''Add a Device'''

HT1414 My iPad does not automatically update the operating system. Under the general tab in settings there should be Updates, but there isn't. Advice plz?

Similar Messages

Maybe you are looking for