HT1414 my iphone has problem in open and if it open iphone shut  down after few minuate

I have bought this iphone5 from Hannova German in April2013 and I am using this iphone5 in Nepal. In Nepal there is no authorized dealer. This problem came just from 15th July 2013. It has problem in opening and if it open it shut down after few minuate. So how to solve this problem and I think it has a guarantee period. I woud like your support to solve this problem. Thank you.
<Edited by Host>

Hi Prashun,
Thanks for visiting Apple Support Communities.
You can use these steps to troubleshoot your iPhone if it's powering off unexpectedly:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 15 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Regards,
Jeremy

Similar Messages

  • My iPhone 4 registered 60% battery and two minutes later completely shut down

    My iPhone 4 registered 60% battery and two minutes later completely shut down, next day it said it had zero battery and turns back on after plugging in for a few minutes... what's going on?  I was using the maps application in the minutes before it shut down on me.

    Maybe it's just the battery percentage display that is messed up?  Have you done the recommended monthly or so drain the iPhone down to the point it shuts down and then charge to 100%, to recalibrate the readout?

  • Firefox is frozen, will not open, and will not let me shut down iMac.

    A couple of days ago, I installed Evernote. That made it so that my iMac would never shut down or go to sleep or restart because Evernote wanted to remain running all the time. Now Firefox has stopped responding. I cannot open Firefox, nor can I close it, nor can I shut down, restart, or log off of my iMac. I guess this might be related to Evernote, but I cannot find a way to uninstall Evernote. I do not know how to go into Safe Mode on the iMac. Two months ago, I upgraded the software to Mavericks and have had problems ever since. The only browser now working is Safari. I read that I should uninstall and reinstall Firefox, but do not see how, because I cannot open Firefox to get to Help on the Firefox toolbar. I see only the Safari toolbar. I cannot open Help and see Troubleshooting Information because I am not in Firefox, I am in Safari.

    Hi,<br>
    It sounds like you have several programs that are stuck (not responding). Here are Apple's instructions for "force quitting" applications that are not responding - http://support.apple.com/kb/HT3411
    If you still can't shutdown your computer after trying that, you can press and hold the power button for several seconds and the computer will shut off.
    It's likely that once you can shut the computer down and then restart it, that Evernote and Firefox and other programs will behave normally.

  • I Dropped my iPhone 3GS into water.  It will power up, but shuts down after a short time. Can anyone help me back up my contacts, pics, calendar?

    I need help backing up info from my water damaged iPhone. It works on and off so I need to get my calendar, etc while it still works!

    If it will not stay powered on long enough to complete a sync or backup, there's really nothing you can do.  It sounds like it suffered physical damage (the water likely caused shorts which have damaged circuitry).  If it has not fully dried out and you keep trying to power it on, you risk merely doing even further damage.
    There's no magiacal fix for this, sorry.  Unless you can get it to power on long enough to run a sync/backup session, you are just out of luck.

  • Satellite P10-554 shuts down after few minutes and I can not reboot

    hello,
    i hope anybody can help me with my satellite P10-554
    when i start the notebook everything works fine a few minutes. than the monitor turns into black and the notebooks shuts down suddenly. i cannot reboot it, when i push the start-button nothing happens.
    i have to wait for about an hour and then i can start it up again, but he works just a minute and shuts down again !
    help me please, cause i need my notebook to work !

    I did that many times. First you need a special torx-screwdriver. Then you can remove the cover over the fans. Than take your vacuum-cleaner and remove the dust. Take a brush or somethin else to remove the dust from the fans. Then, you need to remove I think 2 big screws, now you should hold the cooling falance in your hands, the one with the fans. Clean that properly.
    After that you can remove the copper-cooler, with 2 more screws I think, but it is pretty obviously. Now you should see the blank cpu with lots of heat-paste on it. I dont know why they put so much of this stuff on it from toshiba. So get a better one like Arctic-Silver or sth. My advice is to take the CPU off (one screw on top as far as I remember) and clean the surface.
    The copper you can clean under water, but dont use sth that could scratch the surface. After that let it dry good. Now just put the CPU back and fix it with the screw again. Take a !litte! heat paste and put it properly with a paper all over the surface of the CPU, but remember, just a little! Then follow all steps back, dont forget to clean the graphics-chip as well and put some paste on it. You can see which it is when you look under the fan-cooling-falance, there should be a rest of heat-paste. Everything back to its place and voil*, a nice, cool clean notebook. By the way, I replaced even the fans.
    If you need further advice, just ask!

  • Hello after a development has iOS 5 to iOS 5.01 my iPhone has problem of battery and performance.

    my iphone is in performance since the update.

    I upgraded to iOS 5.01 and my apps keep crashing down. What should I do?

  • My iphone 4S has problem in making and receiving the calls. While making the call , call fails and netwrok disappears. Like wise no voice is heard for incoming calls. This happened after return from the overseas travel.

    My iphone 4S has problem in making and receiving the calls. While making the call , call fails and netwrok disappears. Like wise no voice is heard for incoming calls. This happened after return from the overseas travel.

    Hello SamSax
    Check out the assist page below for troubleshooting call connectivity.
    Calls and connection issues
    http://www.apple.com/support/iphone/assistant/calls/
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • With the new IOS 7 mi iPhone has problems with the screen, I go out once stripes, and Apple told me it is the software. help when there is a new update?????

    with the new IOS 7 mi iPhone has problems with the screen, I go out once stripes, and Apple told me it is the software. help when there is a new update?????

    We are users here.  We cannot possibly know when a new update will be available.

  • My iphone has problem activating. It says incorrect apple id but the apple id is correct

    My iphone has problem activating. It says incorrect apple id but the apple id is correct ?

    FAQ apple id http://support.apple.com/kb/HT5622?viewlocale=en_US
    You are seeing your old apple id because that was the ID that was used to download the app, you can't merge apple id.
    to update the app, you will have to enter the old password.
    Any new apps you download with your new id, will use that id and password.

  • I own a ipod touch and a ipad but i lost my ipod touch and downloaded the find iphone app on my ipad and when i opened the app my ipod touch wasnt even listed on it as one of my products but i use the same apple id for all of my products??!! Please Help

    i own a ipod touch and a ipad2g but i lost my ipod touch and downloaded the find iphone app on my ipad and when i opened the app my ipod touch wasnt even listed on it as one of my products but i use the same apple id for all of my products??!! Please Help

    Ive never used that but I think there is a find ipod app. But im not sure. The ipod might have had to have it on?

  • Tp ended with error code 0247 - addtobuffer has problems with data- and/or

    Hello Experts,
    If you give some idea, it will be greatly appreciated.
    This transported issue started coming after power outage, sap system went hard shutdown.
    Then we brought up the system. Before that , we do not have this transport issue.
    our TMS landscape is
    DEV QA-PRD
    SED-SEQSEP
    DEV is having the TMS domain controller.
    FYI:
    *At OS level, when we do scp command using root user, it is fine for any TR.
    In STMS, while adding TR in SEQ(QA system), we  are getting error like this.
    Error:
    Transport control program tp ended with error code 0247
         Message no. XT200
    Diagnosis
         An error occurred when executing a tp command.
           Command:        ADDTOBUFFER SEDK906339 SEQ client010 pf=/us
           Return code:    0247
           Error text:     addtobuffer has problems with data- and/or
           Request:        SEDK906339
    System Response
         The function terminates.
    Procedure
         Correct the error and execute the command again if necessary.
    This is tp version 372.04.71 (release 700, unicode enabled)
    Addtobuffer failed for SEDK906339.
      Neither datafile nor cofile exist (cofile may also be corrupted).
    standard output from tp and from tools called by tp:
    tp returncode summary:
    TOOLS: Highest return code of single steps was: 0
    ERRORS: Highest tp internal error was: 0247

    when we do scp using sm69,
    SEDADM@DEVSYS:/usr/sap/trans/cofiles/K906339.SED SEQADM@QASYS:/usr/sap/trans/cofiles/.
    it throws the error like below,
    Host key verification failed.
                                                                                    External program terminated with exit code 1
    Thanks
    Praba

  • My iphone has been water damaged and in the mean time ive gone back to using my old phone. But i need to get all the contacts from my iphone i had synced to my laptop, but i don't know where to find them and im not sure if ive backed them up to anything!

    my iphone has been water damaged and in the mean time ive gone back to using my old phone. But i need to get all the contacts from my iphone i had synced to my laptop, but i don't know where to find them and im not sure if ive backed them up to anything!

    If your contacts are synced to your computer then they are in the supported app you are syncing with.
    When you set up syncing of contacts on your device, which application did you select? 

  • HT201263 hey guys i forgot the password for my iphone 4S and i keep on trying any passwords but now my iphone has deactivated it self and its asking me the password but i cant remember it and i dont have the last compter it syniced with!!! so what should

    hey guys i forgot the password for my iphone 4S and i keep on trying any passwords but now my iphone has deactivated it self and its asking me the password but i cant remember it and i dont have the last compter it syniced with!!! so what should i do ?

    In your case your only solution is to restore it ( see http://support.apple.com/kb/HT1808 ) and you may need to force it into restore mode to do that.  This will wipe everything off it and reset it as new, without the passcode.  You can then redownload purchased content, buy unless you have a sync'd copy of your contacts and photo's they will be gone.

  • Hi, My iphone has locked me out and says iphone is disabled connect to itunes. but my itunes wont connect with my iphone. i've tried everything i can think of and my phone is still locked and i cant sync it with itunes. what else can i do??

    Hi,
    My iphone has locked me out and says iphone is disabled connect to itunes. but my itunes wont connect with my iphone. i've tried everything i can think of and my phone is still locked and i cant sync it with itunes. what else can i do??

    While connected to iTunes, try...
    http://support.apple.com/kb/HT1808

  • Hi My Iphone has just been stolen and I cant use 'find my iphone' feature what should I do now?

    Hi My Iphone has just been stolen and I cant use 'find my iphone' feature what should I do now, it has important notes and photos?

    Change all your passwords. Notify your carrier and the police of the theft. Check to see if your homeowners or renters insurance may cover some of the cost of replacing it.

Maybe you are looking for

  • Validation Error Messages of Manual Entries in F4 enabled Fields

    I have a view on which someone has set up F4 help.I see where the GET_V method has been created to establish the pulldown values CALL METHOD /almgt/cl_common_util=>get_f4_help     EXPORTING       iv_type                 = if_bsp_wd_valuehelp_f4descr=

  • Download images in Flash

    Hi guys. I'm asking for your help again concerning scripts... I have a button (downloadImage01) and I want that when people click on it, it gives you the opportunity to download the image (Image01), which will be place in a folder (Images) at the sam

  • How to manually check for iOS updates

    HI My iPad is running 4.3.3 and I want to update to iOS 5, but there isn't a check for update button, there is only an update button which allows me to only update to 4.3.5 I believe it is about 4 hrs after when iOS 5 should be released but correct m

  • USB Microphone cuts out all sound

    I'm using Logic Express 8, with an MXL condenser microphone.  At first everything worked fine.  I could hear all the audio. But now, when I plug in the microphone, it cuts off all sound.  The computer is receiving an audio signal.  Under preferences,

  • Enabling LAN after reinstalling Windows - Satellite Pro A10

    I gave my Toshiba Satellite Pro A10 Laptop a clean format with a copy of Windows XP Pro. Typically, I use a PCMCIA Wireless Internet card, but I do want to connect my laptop via a physical Ethernet cable. Unfortunately I cannot figure out how to enab