HT1414 my IPhone stuck in a state of need to connect it to iTunes
my IPhone stuck in a state of need to connect it to iTunes. What do I do?
have you tried to connect it to itunes?
Similar Messages
-
hello guys, i badly need your help. last night i was trying to udate for a new software on ios but i failed to finish updating then after a few minutes i tried updating it again but it did'nt turned out well. what appears on my iphone is that I should connect it to itunes but unfortunately when i connected it, my laptop could not recognize my phone. Could anyone help me with this? pleaseee when i went to an apple store, they told me to reformat it (so does it mean all my files will be deleted), and how to reformat this? help me pleaseeee.
Turn your phone off and connect your cable to the computer, but not the device just yet. Start up iTunes. Now, hold down the home button on your phone and plug it in to the cable - don't let go of the button until iTunes tells you it's detected a phone in recovery mode. Now you can restore to factory settings.
-
After attempting to update to ios 7, my iphone is stuck in recovery mode and will not connect to the itunes software server. I have already tried the resetting with power swich and home button and plugging into computer but it says the "iPhone software update server cannot be contacted." I am locked out of my phone. Does anyone have any idea how to resolve this issue and get the phone working again. I will add that I am now trying to restore it on a different computer with a lower version of itunes, but the computer that it initially happened on had the updated itunes and gave me the same result ... nothing. Thanks for your help in advance.
Try going to recovery mode as described here. You may have to try this more than once to succeed.
Use the original iTunes that the iPhone synced with.
http://support.apple.com/kb/HT1808 -
I try to update my iphone 4 to ios 7.1.1. But now my iphone stucks in recovery mode and can't connect to itune. i use windows 7
Try the iTunes troubleshooting advice here:
Windows - http://support.apple.com/kb/ts1538 -
i just upgraded my iphone 3gs to ios 6 not sure if it updated but now when i turn on my phone it says automatically that i need to connect it to itunes using the USB port but when i connect it it comes up as new hardware and cannot find a program/software for my device even though i have the latest itunes on my computer. i have tried reinstalling itunes but it still cannot find my phone and now i cannot use my phone as it is stuck on the sync to itunes screen
Have you downloaded and installed the latest version of iTunes from here:
http://www.apple.com/itunes/download/ -
I need help. My ipad 2 was stuck in recovery mode. i tried to connect it to itunes and restore but after downloading the file and extracting the software there is a pop up message that says "the device is full. Deleting files and emptying your recycle been will help you restore." how am i going to erase files if i can't open my ipad. i dont know what to do. Its been 2 days now. please help. thanks.
yes i am sure. This are the exact words... "The iPad "iPad" could not be restored. The disk you are attempting to use is full. (Removing files and emptying the recycle bin will free up additional space". i tried some options, hard reset, redsnow, tinyumbrella but still it's stuck.
-
I updated my iPhone software and now it is saying that I need to connect it to iTunes. I no longer have my computer with my iTunes on it. What can I do? I really don't want to lose my data! I wouldn't have updated if I had known but there was no warning.
Restore loop (being prompted to restore again after a restore successfully completes): This issue is typically caused by out-of-date or incorrectly configured third-party security software. Please followTroubleshooting security software issues if USB troubleshooting does not resolve this issue.
Error 13 and 14: These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
Put a USB 2.0 hub between the device and the computer.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network.
Error 50: This error (and error -50) are timeout errors. Follow the steps for errors 13 or 14 above.
Above from:
http://support.apple.com/kb/TS3694 -
my Iphone 4 will not start up, when i connect it to itunes i says : Activation error This device is not registered as part of the iPhone Developer Program.If you are a member of the Program, please register your device in the iPhone Developer Program Port
Well, you downloaded a bootleg copy of iOS 7 beta and have installed it on your phone without being a developer. It has bricked your phone and you cannot get help here because doing what you did has voided your warranty. Have a nice day.
-
my iphone screen is broken and i need to access it through itunes but my phone is locked. it cannot be unlocked on the screen but is there any way i can do it on itunes so i can access it?
Depends, if you've synced with this iTunes, while that passcode was enabled, you won't be prompted to enter the passcode when connecting your phone. If you have not synced, while that passcode was enabled, you will. So, if you fall in the later, there is no way to do what you want.
-
HT1212 my iphone is locked and said it needs to be conected to itunes what do i do?
my iphone is locked and said it needs to be conected to itunes what do i do?
Restore the iphone.
Read the article you linked -
I have updated my iphone with the current software but it is showing you need to connect to of itunes to activate your phone, when i did that it is continuously showing an error.please help me to get through.
Kindly Activate my phone.Rajan Gupta wrote:
...it is continuously showing an error.
See here > http://support.apple.com/kb/TS3424
Also see this discussion.
https://discussions.apple.com/message/21189708 -
my iphone is displaying "there is no sim card installed in the iphone you are attempting to activate" wn i connect it to itunes,bcoz i hv installed ios5.0.1 for my iphone 3g.can you tel me how to solve dis problem?
I’m having the same issue.
My phone indeed has no SIM card. I kept the 3GS after upgrading to an iPhone 4 and I was simply using it as an iPod Touch.
As far as I had been told, I was perfectly OK to do that and it had been going fro update to update without any issue up to now.
The problem is that iOS 5 requires a new activation, and that this model cannot be activated with a valid SIM. Obivously, I’m not going to take a new line with AT&T ad pay $xxx every month just to be able to activate my previous phone.
I contacted AT&T but they had no clue how to get out of the problem and said it was in Apple’s hands anyway.
I tried restoring 4.3.5 on the phone, but so far I haven’t been successful :-\
I’m open to any suggestion
Corentin -
um my iphone is disabled and says you need to connect to itunes. I have never ever connected to itunes on a computer as i only just got it so someone help me!!!!! can i still download itunes or what OMG help :o
Download iTunes: http://apple.com/itunes/download/
...and use it to restore your iPhone in Recovery Mode: http://support.apple.com/kb/HT1808 -
My iphone is blocked and he ask me to connect me to itunes i did it but he stil say connet to itunes
Hello, my Iphone is blocked and he ask me to connect me on Itunes, I did it but he stil ask me to connect me on Itunes.
What do I have to do ?If you can't update or restore your iOS device
-
i just started the new update for my iphone and my phone is asking me to connect it to itunes but my computer isn't recognizing my phone being plugged in
Click here and buy the DVD.
(89921)
Maybe you are looking for
-
Alerts not triggering in web client
I'm trying to get alerts to work on a Web IC in our CRM 2007 system I am using the standard alert CMRELATEDDOCUMENTS And have created the following Rule Policy in the rule modeler Rule Policy Details Context: Intent Driven Interaction (IC WebClient)
-
Hello collegues, I have a fact sheet Z, in the BSP_DLC_fs component. This Block has the service request of the BP. My customer need that exists a hyperlink to service request detail. I`ve implemented the GET_P_XX.. Method, and I`ve implemented an ev
-
One save for multiple portlets in a page.
Hi, I have 3 portlets in 1 page. All the portlets are having individual "Save" button to save some information in individual portlets. I need to create a new "Save" button which does the work of all these 3 Save buttons in one shot. Basically my new
-
Hi all We are extracting some data from a source system but suddenly that source system is changed to client 200 to client 400 When we want to load some data in dev we cant find old source system again what will be the solution we have assign new so
-
Error: "This game cannot be played."
I get this error when I try to play any game I purchased from the iTunes Music Store: This game cannot be played. Connect your iPod to iTunes and reinstall the game. The only way I know of reinstalling is turning off syncing for games and applying, t