HT1414 My iPhone5 got a problem of getting automatically switched off and then automatically switched on. First i can see my screen getting faded to pinkinsh sort of color and then showing vertical grid lines. any suggestions?
My iphone5 got a problem of getting switched off and on automatically. I can see my screen getting faded and then i can see the pink vertical lines before it switches off. After about 10 seconds it switches on again.
Hi sumit1310,
Thanks for visiting Apple Support Communities.
I'd start with these troubleshooting steps:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 15 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Regards,
Jeremy
Similar Messages
-
Interactive report showing vertical grid lines
Has anyone adjusted an interactive report so that it shows the vertical grid lines? I see the horizontal lines by default but I am thinking the vertical lines will make my data easier to read. Just can't figure how to do that.
Hello Edward,
@Jeff Eberhard has a good solution for showing vertical grid lines.
Here is the solution for whole grid for interactive report to be included in the Region Header/Region Footer/Page HTML Header:
<style>
table.apexir_WORKSHEET_DATA {
border-width: 2px;
border-spacing: 0px;
border-style: solid;
border-color: black;
border-collapse: collapse;
table.apexir_WORKSHEET_DATA th {
border-width: 1px;
padding: 4px;
border-style: solid;
border-color: black;
table.apexir_WORKSHEET_DATA td {
border-width: 1px;
padding: 4px;
border-style: solid;
border-color: black;
</style>Hope it helps!
Regards,
Kiran -
I'm trying to connect a LAN printer, HP Color Laser Jet 3800dn, through a Time Capsule but no one on the network can see it. The printer works fine if I connect it directly to my iMac. Any suggestions?
Hi Clark
There is a good chance the printer is just getting auto IP internally..
Plug it into your TC. And then set to dhcp via the controls on the printer.
If you know the name of the printer it should be immediately available to the network.. but anyway, you can find its IP by printing out the test page. That will also give you the network name.
Most later HP printers have web access to the print servers.. just type the ip into your browser and see if it comes up.
From the Mac, you should then be able to set it up via the printer preferences. Most HP will just appear.. but if not you should perhaps delete the local version and then check again for network printers. -
Time Machine will not let me restore from recent backups. I can see them on the external drive but will not restore sooner that June of 2013! Any suggestions?
All I can suggest is that you open that file on the MBA and save it as a new file, then see if you can open the new one on the iMac.
-
I can call other people on facetime and reach them but if they call me it doesn't ring. What do I change I my strings to get it to ring. If they call me first, I can see the call coming in and accept it but it doesn't ring.
see wemweb answer here:
https://discussions.apple.com/message/19087457#19087457
you'll also see answers to your question in the "More like this" box on the right -
Trying to backup iPad on New Windows 8 machine. I get an iTunes error message "unable to backup" This happens when I try to backup to my computer or iCloud. I don't have this issue with my XP machines. Any suggestions?
Go back to disk manager, assign a drive letter, after the mount. The vhdx will show in disk manager, right click on the vhdx, to add a drive letter
-
Vertical grid lines and Dates on Graph
When I use date values on the x-axis for a graph, the only vertical grid lines that appear in the graph are at the year boundary. For example, if I was showing data for 3 years, I get 3 vertical grid lines; one at each January.
How can I get vertical grid lines at each month?
It will work if I convert the date to character, but then I lose the ability of Oracle Reports to fill in the tick marks for missing dates (say, if there isn't any data between January and March, the graph will still show a label for February).Hi, Ravens Fan.
Thanks for your reply.
Now, the main loop has a wait statement, but the problem remains. I'm using LabView 2009, and I didn't see this behaviour in the previous version, LabView 8.6.
I send you back the uptaded program, and two snapshots as well:
- snapshot 1: just after pressing "Run", "increment" value takes "maximum" value; due to this, there's only one text marker, at "12:00" (there should be one major grid line and one text marker every 10 minutes as "increment" value is set to 600 before entering the while loop);
- snapshot 2: when pannning, "minor increment" takes "maximum" value, and due to this, vertical grid lines don't show any more (there should be one minor grid line every 5 minutes as "minor increment" is set to 300 before entering the while loop).
Regards,
Francisco
Attachments:
1.jpg 309 KB
2.jpg 283 KB
XY-Graph. Time Axis problem.vi 14 KB -
Help! This all runs quite smoothly until I get to 'consolidate library'. Then, tracks start copying, then stop followed by a pop up saying 'Copying files failed. The disc could not be read from or written to.' Any suggestions? Thank you!
I had similar problems, it was a nightmare and on a 3 month ipod too!. I use a Powerbook G4 at home and a G5 at work - both were returning the same problems. so I sent it off to apple, they quickly sent it back saying there was nothing wrong with and it didn't need to be repaired. I tried it again and the same problems occurred "disc cannot be written to or read from." I could copy 20 songs onto it at the very most. A couple of guys at my work suggested updating it on a PC, then adding tunes via my mac as normal - guess what!? it works a treat!?. How ridiculous is that!? an Apple product works best on a PC. these generations of ipods are obviously designed to work best on Intel based Macs. What is wrong Apple? are you abandoning the G-generation!? still, atleast my ipod works for now - it will prove a problem when I have to update the iPod's software since I don't own a PC or an intel-based Mac.
-
I can't update or delete (to reinstall) iTunes. I get a message that "iTunes.msi" can't be found or is not available. It's there but may be corrupted? Any suggestions?
Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on 25 June 2010. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. (The results from mydigitallife and Major Geeks are worth checking.)
After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove".
Quit out of CleanUp. Restart the PC, and try another iTunes install. Does it go through properly this time? -
Hello guys,My first time in community.my problem is that my SIM card was working ok and from today at the left of the screen up shows that is searching for the sim.I contacted the carrier and the SIM card shows that is working.Any suggestions?
Hey NicolasZen,
Thanks for the question and welcome to the Apple Support Communities. I understand that you are experiencing issues with “No Service” or “Searching” on your iPhone. The following resource provides some great troubleshooting steps that you may wish to try:
iPhone: Troubleshooting No Service
http://support.apple.com/kb/TS4429
Your iPhone may have one of these symptoms:
- iPhone displays "No Service" or "Searching" in an area of good coverage
- iPhone doesn't regain service when returning to an area of coverage
Resolution
If you encounter either of the above symptoms on your iPhone, follow these steps to attempt to resolve the issue. Test after each step.
1. Toggle airplane mode: Tap Settings > Enable Airplane Mode, wait five seconds, then turn off airplane mode.
2. Turn iPhone off and then on again.
3. Remove the SIM card and verify that it's a valid, carrier-manufactured SIM. Also verify that it isn't damaged, worn, or modified. Then reinsert it.
4. Check for a carrier-settings update. Connect to a Wi-Fi network. Then tap Settings > General > About. If an update is available, iOS will ask you if you want to install it. If Wi-Fi isn't available, connect your device to iTunes.
5. Update your iPhone to the latest version of iOS.
6. Reset network settings by tapping Settings > General > Reset > Reset Network Settings. This will reset all network settings, including Bluetooth pairing records, Wi-Fi passwords, VPN, and APN settings.
7. Restore the iPhone.
Thanks,
Matt M. -
Spry table, vertical grid lines
How do you format a table so the vertical grid lines show up.
I have the roll over effect working for rows in the table, but the
tables are large enough that is can be difficult to follow columns
straight down. I would like black vertical line to appear between
columns.
thanks.If I understand you right, you wish to have spreadsheet type
columns. In that case this is not a Spry question but an HTML and
CSS question.
In CSS the format would look something like:
#mytable th {
text-align: left;
padding: 3px;
font-weight: bold;
border:1px solid #AAA;
background-color: #EFEFEF;
In the above example I am formatting a heading cell.
In IE, if the cell is empty there will be no border, thus it
is best to populate the cell with a space as in ' '.
I hope this helps. -
My screen freezes after a few seconds on my iphone 5c and the display fades slightly so you can see faint lines in the background. I'm not sure whether this is easily fixable or a major problem. Have reset the device, but this has worked. Any ideas?
To make sure that this is not software related, set it up as new device, explained in this article:
How to erase your iOS device and then set it up as a new device or restore it from backups -
I have a ipod classic 160GB and it's not showing any music anymore, but there is still showing 7GB of memory being used, and I don't have it backed up on my itunes, since I had to put a new hard drive on my computer. Any suggestion to find out whats on that memory or to get it the music back, there is approximately over 1400 songs on it?
What is the memory being used by, is it Other? If it is, that means the iPod can no longer read the music, so it has put it all in "Other".
The usual fix for this is to allow the iPod to Sync with its iTunes Library. If that doesn't work, the next option is to Restore the iPod using the Restore command in iTunes, on the Device/Summary pane.
Unless you are very (very) lucky, I suspect that you are going to have to Restore your iPod. Restoring will remove everything form the iPod and put back onto it only what it finds in your iTunes Library, which you say is currently empty.
If you have to rebuild your Library after this issue, by adding all the music back again, this is going to be hard to hear, but for the future, you may want to consider always having a backup of your library. The easiset way to back the Library up is;
if the Library is small enough, burn it to a DVD, as digital files, not a "music CD".
If your Library is too large for a DVD, buy yourself an external hard drive and copy the Library onto the drive. Remember to update the backup every so often. -
TouchSmart monitor showing vertical coloured lines
My touchsmart is showing vertical colourful lines when I try to boot the computer. I called HP and they said I need a new computer. Does anyone have a solution to the problem?
Model number would help a grat deal...
The IQ7xx units are prone to a certain kind of failure that looks like this, it is gnerally not something the average person would repair with a 3 generation old PC. -
I turn it off and it will wait anywhere from a few seconds to a few hours and turn itself back on. You can see how that can get annoying and I can't seem to solve the problem.
There's a slight chance this might help:
Intel-based Macs: Resetting the System Management Controller (SMC)
Otherwise it needs to be repaired.
Maybe you are looking for
-
Cannot call certain numbers - says "account not validated" Why??
When I call some numbers - local, often-used numbers, sometimes it will say 'this account cannot be validated. If you are a Sprint customers, call... If you have another provider, contact them... This also happens with house phone.
-
Hi, I want to open dialog window with ADF Faces
Hi, I want to open dialog window with ADF Faces when commandButton pressed, but the window opended at same window, not opened new window. my command button is follow, <af:commandButton text="Ücret Girişi" binding="#{backing_rezervasyonlar.rez_iptal}"
-
Jeg har købt Adobe Photoshop CC and Lightroom 5, plus 20GB of cloud storage. Men jeg kan ikke downloade dem. Serveren siger hele tiden at der er en uventet fejl og jeg skal prøve senere. Det har jeg så snart gjort en dag. Er der en løsning på det? H
-
I ahve 2 tables: Table A COL X 123 345 567 789 Table B COL Y COL Z ALL Tom 789 HarryOutput I want is: If the user is Tom then I want all the values from Table A and if the user is Harry I want jus
-
BI Reporting based on Interchangeability group
Hello all, Does anyone know if it is possible to extract interchangeability data in BI and to use them in reporting? If so, please tell me how it is possible. Thank you very much.