HT1414 my wi fi on/off button is not working. any suggestions?
my wi fi on/off button is not working when i touch it. any suggestions on how to fix it or what to do?
Is it disabled, that is "grayed out"? If so, see this thread, and good luck: https://discussions.apple.com/thread/4313031?start=0&tstart=0
If not, turn phone off/on again. If that doesn't do it, reset by holding down the power and home buttons until you see the apple logo (ignore the slide to turn off message). Finally, you can try restoring the phone from backup.
Similar Messages
-
My 4th generation ipod touch will not power off and the volume buttons do not work, any suggestions?
My ipod's power off and volume buttons are not working. It's as if the volume down button is constantly being pressed. Both buttons "work" as far as I can press them in, but there is no response from the ipod. Any suggestions? I have updated the software, but that did not help.
Thank you!I have the exact same problem!!
please let me know if you have found a fix / soution
email me at [email protected] or just reply, any help would be great
thanks. -
TS2771 Home Button is not working, Any suggestions?
The Home button on my Ipod touch is not responding, Any suggestions to what I can do?
fix for Home button
Fix a broken, unresponsive or sticky iPhone Home Button -
My 1-year ipod nano locked up and would not start overnight. The on/off button will not work and stopped holding charge. No water damage, no fall, nothing unusual. I restored it (twice) but it will still not hold charge and on/off does not work. I tried to restore it again and charged it in three different locations with different cables. etc but nothing. Suggestions?
- After charging for 1/2 hour or so, does iTunes see the iPod? If yes, restore the iPod from backup.
- If no, se if placing the iPod in recovery mode will make it visible so you can restore the iPod. For recovery mode see:
iPhone and iPod touch: Unable to update or restore -
My on and off button is not working anymore and my iphone fell again today so the numbers 7,8,9 not working and so i cant enter my password to access my iphone. Pls, what can i do about this to access and change my password?
Changing your password won't help. It is a touchscreen so if 7,8,9 are not working then that part of the screen will not work if you were to get it unlocked.
TeeKnows is right. You need to contact Apple for a repair. -
how do i restart my ipod touch if the power off button does not work and it is disabled and it say connect to Itunekyl
Place the iPod in recovery mode using this program. and then restore via iTunes.
RecBoot: Easy Way to Put iPhone into Recovery Mode -
Brought iPod 4 for Daughter, she put on Passcode and she can't remember it, the ipod is saying "ipod is disabled" connect to itunes. Connented to iTunes come up with need to put passcode. The on/off button does not work, can't turn off and hold home button to reset please help.
Place the iPod in recovery mode using one of these programs and then restore via iTunes:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
For MAC or PC
The Firmware Umbrella - TinyUmbrella
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
What do i do if my ipod 3 is disabled and the power off button does not work?
What do I do if my iPod 3 is disabled and the power off button does not work?
Did you try restoring your iPod on itunes.
-
The return button on my macbook is not working, any suggestions?
the return button on my macbook is not working, any suggestions?
By the way, if you are still interested, I found a solution. It's a bit crazy, but basically I have insulated the parts of the keyboard connector corresponding to the power button using some thin tape and then used a very thin wire going from the logicboard (where the test pads for startup are located) to my eject key, this way the original power button does not respond anymore and the eject key can be used as the power button, just like in the new Airs
I can provide photos if you want. -
while downloading apps seems to have crashed ,now have striped screen and wont turn off, treid the 2 button 10sec trick but still not responding any suggestions please ?
Try here:
iOS: Not responding or does not turn on
If not successful, let the battery fully drain. Then charge for an hour and try again. -
My on/off button is not working. What can i do??
My on/off button has stoped working for some unknown reason and im not sure what to do?
If you device is under warranty take it to the Apple Store and have it looked at.
Settings > General > Accessibility > AssistiveTouch > Toggle On
This feature can serve as the Sleep/Wake button at the moment
Hope that helps -
My iPhone 4 is vibrating constantly and will not turn on or turn off when any buttons are pushed. How can I reboot it (holding top on/off button does not reboot or have any impact)?
Hi Ive just had the same problem,I was playing a gamy 'my farm' & i put my iphone 4 down to answer door then when i picked it up the iphone was black screen & no power,i did plugin to itunes & the wall plug but nothing,then i held the power & home buttons down for about 6 seconds & the apple logo appeared.I really freaked,its ok right now but im phoning my apple store becoz it had 77% battery so theres something wrong with this iphone 4.
I changed my 3gs 4 times & my original 2g 5 times,I just dont have any luck with iphones,now im worried its gonna do that again ,the game 'my farm keeps dropping out & saying no internet yet my internet connection is strong & fine,looks like we have the same problem even wen i plugged it into itunes it didnt recognise the iphone,i hope u get yours sorted -
The volume On/Off switch does not work. It does not mute sound. I have to turn volume all the way down to silence the sound.
Is the switch faulty or am I missing something here?well first remove the case. check the headphone jack for debris. do a hard reset by holding sleep/wake and home button down together for 10 seconds untill apple appears. backup and restore via itunes. if issue persists the device needs repair
-
My on/off button is not working, how can I restart my phone?
When I go to lock or turn off and restart my Iphone 5 the button at the top will not work. So how can I restart my Iphone?
The phone should turn back on when you plug it in.
-
HT201412 I have a Ipod touch 4th gen. and the volume button or power off button will not work.
My Ipod touch volume button on the side will not work. Niether will my power off button. I just updated to IOS 6.1.2 and now they will not work. It will not even go to the sleep screen?!!! Help
Try (as best you can):
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Maybe you are looking for
-
Work flow in Traing & Event Mgt
I need to create a work flow in Traing & Event Mgt, ESS Is there any standard way to creat work flow in T & E Mgt? pls mail
-
How does one delete photos from Premier Elements?
Hello! I am trying to delete my photos from Adobe (I think Premier) Elements. I am also trying to delete the albums. I think I have 667 photos on it, and may 30 albums. When I select photos and then click delete, message comes up: The request operati
-
Seamlessly migrating Labview 6.1 to Labview 10
Hi, My company have several legacy projects that were written in Labview 6.1. We recently bought Labview 2010 and tried to convert the projects over and found several issues: 1) Report Toolkit changes Write PNG (word). vi Write JPEG (word)
-
Anyone know how to correct settings as my shortcut keys aren't working?
I'm a complete novice to In Desi gn and just started using it this week. I have it set up on my pc as part of the Creative Suite 4. It seems to have been installed correctly, however the default keyboard shortcuts aren't working at all. Even when
-
Hi Experts, I am currently tryin to develop a solution to create a large number of ECP costing models from inputs provided in a spreadsheet. Is there any way to do this without having to manually key the data? Any help would be greatly appreciated. C