HT1414 no update server found? is it done?

No update server found. Is the ipad done ? Shows apple logo,turns on and off but won't open up.

That indicates the update failed. You'll have to force it into recovery mode and restore it as explained here: http://support.apple.com/kb/ht1808. (Restoring it will update it.)

Similar Messages

No update server found for context :e:

i have sap netweaver 7.0 abap trial version on my machine. i have navigated to se80 and write a program while walking with this weblog :
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/6270 [original link is broken] [original link is broken] [original link is broken]
the program is called z_hello_world_local :
REPORT Z_HELLO_WORLD_LOCAL.
data output_text type string.
output_text = 'Hello World'.
write output_text. "obsolete statement
any way when i have tried to save or run the program it returns the error:
no update server found for context :e:
also i must say that <u><b>when i clicked the as abap wp table, on sapmmc, the work processes like dia, upd, enq, btc, spo seem not to be worked ("no" in the line under start title). only the first dia works (it has a yes under start)</b></u> what can i do for this second problem?
any ideas?
thanks
Edited by: developer developer on Aug 23, 2008 5:40 PM
Edited by: developer developer on Aug 23, 2008 6:26 PM
Edited by: developer developer on Aug 24, 2008 10:06 AM

I came trough the same problem...This forum post might help you -;)
[Software Downloads;
Transaction SM13 is the key -;)
Greetings,
Blag.

Error - No update server found for context

Hi
I'm trying to write a BSP page that sends E-mail via sap connect.
I did try to get the demo program bsptutorialmail from package SBSP_DOCU to work.
When I try to send an E-mail, the program terminates with
500 SAP Internal Server Error
Error message: No update server found for context :b: ( type of termination: ABORT_MESSAGE_STATE )
I can in my system send e-mail from a standard program using the function Z_E_KEG_SEND_SIMPLE_EMAIL that I found in a weblog here on sdn
/people/thomas.jung3/blog/2004/09/08/sending-e-mail-from-abap--version-610-and-higher--bcs-interface
I have not been able to find any info on this error, just a hint that I need to configure some RFC destination ?
Any hints on how to solve this are very much appreciated

I found nearly that exact same error message in an old MM OSS note - 333941. The error message there was in ME47:Termntn A:No update server found for context:X. Now that was context:X and not context:b like in your error, but perhaps the solution then will lead you to some clues. The following were the code changes of that OSS note:
Delete Block
    SET LOCALE LANGUAGE EKKO-SPRAS.            "CF 4.5A TODO
    XEINA-SORTL = XEKPO-TXZ01.
Insert Block
    DATA: S_LANGU LIKE SY-LANGU.
    S_LANGU = SY-LANGU.
    SET LOCALE LANGUAGE EKKO-SPRAS.                         "149717
    TRANSLATE XEINA-SORTL TO UPPER CASE.                    "149717
    SET LOCALE LANGUAGE S_LANGU.
On one hand this correction might be telling us that this error has something to do with language, or more specifically the act of not returning the local language to the logon language. On the other hand, maybe it is just leading us on a wild goose chase.
Message was edited by: Thomas Jung

My update server isnt working

every time i try to update my phone it doesn't work and i always get a message that says there is an update server problem

Hello GeorgeDoulos83
I don’t have much to go on, but the article below should give you a good starting point to troubleshoot iTunes Match.
iTunes Store: Troubleshooting iTunes Match
https://support.apple.com/kb/ts4054
Regards,
-Norm G.

Plese Help. Me have FAT32 USB, ISO. Boot camp:Can't install Windows Support Software because the Software Update Server "(null)" can't be found. It asks me to network Diagonostics, but internet ok. Plese Help

Plese Help. Me have FAT 32 USB, ISO, Boot cam say can't install windows support software because the software update server "(null)" can't be found.
I know there are many other threads, but I guess I couldn't find clear answer to this problem. Is that the Apple's server problem or just me?
I'm trying to install Windows7 via Bootcamp, with FAT 32 formated USB with ISO, on Macbook air 2012.
Thanks!

The problem is the encryption and how your notebook handles it rather than a Time Capsule problem. I had similar problems until I updated the WLAN drivers on my IBM T41.
The way I convinced myself it wasn't an Apple problem was to connect my IBM T41, via ethernet, to my AEBSn. I was able to connect to internet so I knew it was a conflict between my wireless card and the AEBSn.
I am now using the WPA2 encryption for the AEBS without issue and connecting many different types of hardware; three iPod Touches, two MSI Wind Netbooks (Win XP SP3), one IBM T41 (Win XP SP2) wirelessly and both my 20" iMac and Dell 8250 Win XP (SP2) by ethernet
The MSI Winds are brand new and they would connect to the AEBSn but couldn't get an IP address from the internet (Limited or No Connectivity error message). The AEBSn was using WEP encryption. After doing a little research I found that WEP was a very common cause of this error message so I switched the AEBSn to WPA2 and everything works fine now.
Don't assume that because you can't connect via OPEN it isn't a encryption issue because my Winds wouldn't connect that way either...it wasn't until I changed to the WPA2 Personal that they connected.
You may also need to change the program that handles the WLAN connection, sometimes Windows handles it better but for the newest addition to our household, the MSI Winds, I am using the Realtek utility that matches the WLAN card and everything is hunky dory...
Finally sometimes firewalls will prevent getting the IP address...doesn't happen often but it has happened to me so I would double-check that by turning off the Windows Firewall and just verify that it isn't the firewall (that's never been a problem with my Apple AEBSn but it was a problem with an older Dlink g model).

HT1414 the iphone software update server could not be contacted.a duplicate file name was specified , please help as this is driving me nuts,does anyone know which file it could possibly be ?

Hi could anyone help me out? my iphone 3gs keeps restarting itself every two minutes which i think is some kind of software issue,now there are a number of things i have done starting with putting in a new battery.when i charge the phone it resets itself every two minutes or so and the battery indicator stays at 4% so i decided to restore the phone on itunes (which is the latest edition) and when i connect my phone which i have put into recovery mode using the buttons, i get an error message saying :- the iphone software update server could not be contacted.a duplicate file name was specified. i have tried re-installing i tunes and that doesn't solve the issue and i have trawled through the program files to see if i could spot the duplicate but without success ,has anyone had the same issue and resolved it?

An iPhone 3G cannot be updated beyond iOS 4.2.1...that's the end of the line for your phone.

Can't upgrade my ipad2 to ios5 .. itunes says ipad update server not found

I have my main desktop I use for setting up my new iPad2. Syncs fine, but when I tried to update to ios5, keep getting message that ipad update server is not available, check internet connection. Itunes sees the internet, because it allows me to connect to the istore .. etc. Changed cables, I have tried it with firewall on, and firewall off .. makes no difference. The test shows no connection, but you can see by the diagnostics that it did connect.
PC is XP Pro,
I could connect fine from my laptop, working on same home network, however if I upgrade, it will dump all my apps .. I don't want to lose everything.
Is there a way to unsync my desktop, then sync with my laptop instead, backup, then do the update from my laptop?
Here is the info below ..   Thank you ..
The diagnostics file shows;
Microsoft Windows XP Home Edition Service Pack 3 (Build 2600)
Gigabyte Technology Co., Ltd. G31M-S2L
iTunes 10.5.1.42
QuickTime 7.7.1
FairPlay 1.13.36
Apple Application Support 2.1.5
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 4.0.0.97
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.5.502
Gracenote MusicID 1.9.5.115
Gracenote Submit 1.9.5.143
Gracenote DSP 1.9.5.45
Current user is an administrator.
The current local date and time is 2011-11-27 20:39:51.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is not supported. (16002)
Video Display Information
Intel(R) G33/G31 Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 10.5.1.42 is currently running.
iTunesHelper 10.5.1.42 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
Description:          Realtek RTL8168/8111 PCI-E Gigabit Ethernet NIC - Packet Scheduler Miniport
IP Address:          192.168.1.99
Subnet Mask:          255.255.255.0
Default Gateway:          192.168.1.1
DHCP Enabled:          No
DHCP Server:          255.255.255.255
Lease Obtained:          Wed Dec 31 16:00:00 1969
Lease Expires:          Wed Dec 31 16:00:00 1969
DNS Servers:          192.168.1.1
Active Connection:          (none)
Connected:          No
Online:                    No
Using Modem:          Yes
Using LAN:          No
Using Proxy:          No
SSL 3.0 Support:          Enabled
TLS 1.0 Support:          Enabled
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was successful.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2011-11-27 20:27:00.

It's my understanding that you do not need Lion on your Mac but you do need the latest version of iTunes. If you already have this, there may be some other problem.

Trying to update keep getting a message "the ipod software update server could not be contacted Network connection could not be established" using mac OSX. done this with 2 ipod touches??

trying to update 2 ipods but when I go through the process it says "The ipod software update server could not be contacted" "Network connection could not be established". One of the ipods is locked and I don't remember password.

Here's what you can do in case of the forgotten password:
Connect in recovery mode and restore, you'll get the option to rest the passcode during this process:
iOS: Unable to update or restore and iPhone and iPod touch: Wrong passcode results in red disabled screen
If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
Check this post for the network problem:
https://discussions.apple.com/message/17855328?ac_cid=142432#17855328

HT3204 This is wgat my coputer said after running diagnostics on it: Connection attempt to firmware update server was unsuccessful.An unknown error occurred (-9808).No FireWire (IEEE 1394) Host Controller found.

When I run the diagnostic on my computer this is what it says: Connetion attempt to firmware update server eas unsuccessful. An unknown error occured (-9808). No fireWire (IEEE 1394) Host Controller found. What should I do so that I am able to update and restore my ipod?

In the course of your troubleshooting to date, have you worked through the following document?
iTunes Store: "An unknown error occured (-9808)"

HT201210 The iphone software update server could not be found

i am not able to update my iphone it says The iphone software update server could not be found

Macs & iPhones have the same problem, mine included. You don't have to have Windows to be having this same problem with the same exact error message. And these apple articles are USELESS, as none of their suggestions apply: http://support.apple.com/kb/TS1275

How to resolve: "Update server not found (check your internet connection)"?

When doing Help / Check for Updates, I get "Update server not found (check your internet connection)". This has been the case for 6-8 weeks or longer but auto update worked fine before. Not sure if something changed on my MacBook Pro. If so, I can't pinpoint it.
MacBook Pro (Intel Core 2 Duo)
Mac OS 10.6.6
Firefox 3.6.13
Firefox set to "No Proxy"

See iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect to your computer & click on the "Update your device using iTunes".
Tip - Disable your firewall and anitvirus software temporarily. Then download and install the iOS update. After you update to iOS 5.x, the next update can be installed via wifi (i.e., not connected to your computer).
 Cheers, Tom

Apple update server could not be found

What does it mean when apple update server could not be found error comes up?

This forum is for questions from those managing sites on iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes for Windows forums.
Regards.

HT4623 When I bought my iPhone 4s, a friend activated it for me using his email. Later I changed it to my own email on iPhone website (iCloud A/C). But when I try to update, I found it still shown my friend's email and I don't have his password. What can

When I bought my iPhone 4s, a friend activated it for me using his email. Later I changed it to my own email on iPhone website (iCloud A/C). But when I try to update, I found it still shown my friend's email and I don't have his password. What can I do?

In addition to what FelipeV is telling you, I advise you to contact your friend and have him remove the iPhone from his apple id through icloud.com. Otherwise, if in the future you want to update the iOS or restore the iPhone for troubleshooting a problem, you may find that you cannot activate it again due to the feature Activiation Lock in iOS 7.
Once your friend has done this, you should deactivate Find my iPhone on your iPhone iCloud settings and then activate it back with your own Apple ID.

I don't know much about computers can anyone walk me through this ? How Do I Change The Software Update Server Address On A Client ? what do I open and how do i put it in the right spot?

I don't know much about computers can anyone walk me through this ? How Do I Change The Software Update Server Address On A Client ? what do I open and how do i put it in the right spot?

The simplest method is to run a defaults command on the client Macs (easily pushed via Apple Remote Desktop):
defaults write com.apple.SoftwareUpdate CatalogURL 'HTTP_URL_FOR_CATALOG'
for a user. If you run it via sudo it will set it for whenever you use softwareupdate as root.
The HTTP_URL_FOR_CATALOG has been changed with Mac OS X 10.6. If you use MCX it will automatically pick the new catalog – however if doing it manually the following URLs need to be used for whichever client version is in question:
Mac OS X 10.4: http://mysus.example.com:8088/index.sucatalog
Mac OS X 10.5: http://mysus.example.com:8088/index-leopard.merged-1.sucatalog.sucatalog
Mac OS X 10.6: http://mysus.example.com:8088/index-leopard-snowleopard.merged-1.sucatalog
Mac OS X 10.7: http://mysus.example.com:8088/index-lion-snowleopard-leopard.merged-1.sucatalog
Mac OS X 10.8: index-mountainlion-lion-snowleopard-leopard.merged-1.sucatalog
To double check this applied you can run the following command:
/usr/libexec/PlistBuddy -c Print /Library/Preferences/com.apple.SoftwareUpdate.plist
and /usr/libexec/PlistBuddy -c Print ~/Library/Preferences/com.apple.SoftwareUpdate.plist
to see what settings are for the computer and user appropriately.
If this is working correctly when running Software Update (GUI) you should see the server address appear in parenthesis in the title of the window.
MCX
Another alternative is to use Workgroup Manager to manage the preferences via MCX from your server. This can be done for users, or for computers if they are bound to your Open Directory.
If you are using 10.5 Server or newer: you can simply use the Software Update section under Preferences.
Manually:
Choose the accounts, computers, or groups to have the preference applied to.
Click on Preferences, and then the Details tab
Press the Add… button and navigate to /Library/Preferences/com.apple.SoftwareUpdate.plist
Press Edit…
Under Often, add a New Key and enter the name CatalogURL
Make sure the type is string and then enter your SUS URL (eg. http://mysus.example.com:8088/index.sucatalog or if using 10.6: http://mysus.examle.com:8088/ – see above from the defaults section)
Press Apply Now, then Done. Once users/computers have refreshed their MCX settings (usually the next login or restart) the new settings will take over.
If this is working correctly when running Software Update (GUI) you should see the server address appear in parenthesis in the title of the window.
In order to have a system-wide configuration one has to run the following:
sudo defaults write /Library/Preferences/com.apple.SoftwareUpdate CatalogURL "http://your.updates-server.lan:8088/index.sucatalog"
In order to correctly work both on Leopard and Snow Leopard the right command to issue is:
defaults write /Library/Preferences/com.apple.SoftwareUpdate CatalogURL "http://your.updates-server.lan:8088/index-leopard-snowleopard.merged-1.sucatalog"
Happily used and tested on my network
The DNS trick that Chealion points out is fantastic. I use it at our office, and every computer on our LAN will automatically pull the updates from the local repository at high speed without any configuration.
Create the swscan.apple.com DNS zone on your internal DNS server, and have it resolve via an A record to your Mac
Tags: automaticupdates mac clients macosx setting as default software update
Category: Serverfault
Share
0
0
Google +
0
0
0
5
You might also like:
Can I Update My Jb 4s To 6.1.2 Without Restore? Tue. Jan 21st, 2014
Iphone 4 Not Charging After Update To IOS6
IPad 2 Not Updating To IOS 5.1
How To Resolve The â€âunable To Install Updateâ€ Error For OTA IOS Updates?
What Is â€âSoftware Updateâ€ Doing When It Says â€âChecking For New Softwareâ€?
Advertisement
Comment
- See more at: http://www.eonlinegratis.com/2013/how-do-i-change-the-software-update-server-add ress-on-a-client-mac-to-use-my-own-server/#sthash.YhHp5zWk.dpuf

HT4972 cannot update ipad on windows 7 done everything it just will not connect to update server

the itunes update server could not be contacted .Please check your internet connection or try again later . this is as far as i get and my pc is on internet

Might be a problem with firewall or antivirus.
A way out is to download the new iOS version manually. Then connect the iPad and hold Shift when you click Update. That opens a dialogue to allow you to navigate to the downloaded file
This page has links to Apple's download servers. Make sure you pick the right file for your device. This is how I do all my updates
http://osxdaily.com/2012/09/19/ios-6-ipsw-direct-download-links/

HT1414 no update server found? is it done?

Similar Messages

Maybe you are looking for