HT1414 tried to update my iphone couldnt because was a problem with the firmware... what is this, what causes it?
cant update my iphone... problem with fimware what is this, what causes it?
Thanks for the answer diesel vdub,
I am not the original owner, how would I know if it was hacked or jailbroken?
Could they help me at an apple store?
Thanks again.
Similar Messages
-
while trying to update my iphone 4 last night, it froze with the itunes logo and a plug underneath. Can I fix this? How?
See: http://support.apple.com/kb/HT1808
-
Hi have tried to update my iphone now it has locked out with the apple sign on and won't switch off
hi have tried to update my iphone now it has locked out with the apple sign on and won't switch off - any ideas?
See here - http://support.apple.com/kb/TS3694#error1603
-
I have just tried to update my iPhone 5 adn its stuck with iTunes plug in sign, I have always used my I CLOUD.
Please someone help, Im lost without my phone!!Do this.
Turn your phone off: When you get to that itunes plug in sign, press and hold the power and home button until your screen goes black, and release those buttons when it goes black. ( make sure your phone is not plugged in your pc yet).
Now your phone is off.
Next do this: Press and hold power+home button for exactly 10 seconds, after 10 seconds pass, release the power button but keep holding your home button for exactly 13 seconds.
Now plug in your usb cord to your pc and then to iphone, and open up itunes. Itunes should say that there is a device in recovery mod discovered , and simply press RESTORE. Your iphone will restore and you'll be able to use your phone.
Reply with results or questions.
Hope I helped.
Donnie. -
IPhone SDK - post bugs and problems with the Firmware...
So far I'm noticing issues with the 2.0(5A225c) build of the OS.
Everything is much slower than it used to be for one. I have a simple UIViewController with a table with only 9 text elements. It doesn't even fill the screen and it scrolls like a snail. My app runs so slow, but I can't tell if it's a performance issue in my app, or a debug firmware. Even the slider to unlock is slow and so is scrolling in all OS menus.
I also noticed in Contacts that the fast slider on the right appears but does not respond to touches. So much for actually using my phone for the next few months. I hope they fix some of this stuff soon.
Anyone else noticing issues?What a relief! I can also confirm that this build is very slow. I am writing a game called Trism (www.demiforce.com for info) which makes use of layered UIImageViews for the game pieces, scoring, borders, and so on. When beta 2 arrived, I got really disheartened because suddenly everything was moving much more slowly. I initially thought the slowdown was because of some fault in my code, which led me to learn some lower-level CoreAnimation and Quartz stuff, which has got the speed back around where it was originally.
We can only hope the slowdown is due to new features of the OS needing to be tightened up a bit, and not as a sign of things to come. Nevertheless, I encourage other developers out there to take a look at using different implementations if need be. Specifically, if your views or text labels don't require the heavy animatable features of the UIView class, try taking a look at using the lower-level CALayer class and see if that helps your performance. -
I am trying to update my Iphone 3 and when i get to the activation step after a few minutes it shows a message that says " Your iPhone could not be activated because the activation server is temporarily unavailable. Try conenecting your iPhone to iTunes to activate it, or try again in a couple of minutes.
If the problem persist, contact apple support at apple.com/support
I been trying for a few times now and I keep getting the same message. How can i fix it? now my phone doesnt work.These are the steps mentioned in the article iPhone: Troubleshooting activation issues
Perform the following steps if you receive one of the messages above:
Restart the iPhone.
Try another means of reaching the activation server and attempt to activate.
Try connecting to a known-good Wi-Fi network if you're unable to activate using a cellular data connection.
Try connecting to iTunes if you're unable to activate using Wi-Fi.
Restore the iPhone.
If you receive an alert message when you attempt to activate your iPhone, try to place the iPhone in recovery mode and perform a restore. If you're still unable to complete the setup assistant due to an activation error, contact Apple for assistance. -
I am trying to update an iPhone 4 but I can't follow the instructions above because "software update" is not an option under settings/general. How can I update my phone?
The option to update without the computer (Over the air) was made available with iOS 5. If your iDevice is using a version of iOS lower than 5, you will need to use iTunes on your syncing computer to perform the upgrade. Use the Apple link below as a guide for the upgrade.
http://support.apple.com/kb/HT4972 -
i tryed to update my iphone and now my phone screen show the itunes logo with a wire and won't turn on, i tryed to update my iphone and now my phone screen show the itunes logo with a wire and won't turn on
Did you try to connect in recovery mode to your computer, explained in this article?
iOS: Unable to update or restore -
Trying to update my iPhone 5 iOS 6.1.4 to the new iOS 7 and it says my software is up to date.
Please help. Are the servers just down?Apple's servers are busy. Check again in a few hours or tomorrow.
(89483) -
I was trying to update my iPhone but now it is frozen on the black screen with the apple icon. It won't do anything. Any suggestions?
Is your iphone hacked/jailbroken?
-
I was trying to update my Iphone and lost all my music on the PC how do I get the music back on my phone?
Connect in recovery mode and restore, as described in this article:
If you can't update or restore your iOS device -
I'm trying to update my iphone 4 and in order to compelte the restore backup from itunes i need to turn off the 'find my iphone' but i cant get passed the restore backup stage - what should i do?
Hi beckiewinter!
I have some information for you that may help you understand your iPhone's Activation Lock more thoroughly:
iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818
So in order to update your iPhone, you may need to turn off Find My iPhone. This can be done through the iCloud settings, and more information on those settings can be found right here:
iCloud - iPhone User Guide
http://help.apple.com/iphone/7/#/iph3c79652c
Thanks for using the Apple Support Communities. Have a good one!
-Braden -
Hi after trying to update my iPhone 5s while connected to iTunes on the Mac I got a notice saying it could not update the phone (error message: (-1)). Any idea what this error message means? Is it a space issue?
Resolve iOS update and restore errors
-
I tried to update my iphone 4 to i6.1 and now the phone wont turn on or charge
i tried to update my iphone 4 to i6.1 and now the phone wont turn on or charge
Um, connect to iTunes?
-
when i try to update my itunes on my pc i keep getting the messaage that there was a problem with the installer and it could not finish. how do i fix this? i`ve tried to download 3 times already.
Hi
I've got a similar problem. iTunes v10.2 worked fine, but when I tried to update it to 10.5 I got a 'Bonjour' error. I eventually solved that but I still couldn't upgrade to 10.5, so I deleted every single Apple, Quicktime, iTunes, etc file on my PC using Revo Unistaller (because the normal Windows Add/Delete programs wouldn't work) but now, when I install the latest iTunes version from scratch (on XP SP3), it says: "the installer encountered errors before it could be configured.... your system has not been modified"
Any ideas?
Rick
Maybe you are looking for
-
Finally got a recovery CD but how to use it?
Hello, after months of trying i finally got my self a product recovery CD https://backupmedia.toshiba.eu/landing.aspx I hope this was the right place to get one, as it was the only one i could find. Anyway i as far as i know i have keep pressing f10
-
so I change my password.I sign out i sign back in and all I am getting is a page that tells me crap in which I have no interest whatsoever
-
Hello Guys, i want to export many Baselines from one User in my repository to other. Is there a possibility to export Baselines from the commandline? Or can i export all Baselines at once??? I Use OEM 9.2.0 with ORA DB 9.2.0.7 Thanks for response
-
Physical standby database to Logical standby
Can I convert a physical standby database to Logical standby,
-
G4 w/ 10.4.11 Won'T Install
I've not tried a shift bar system opening but I've tried just about everything else that has been recommended by this list, including Disk Utility. I am curious if Mac support has an established way of handling my problem. It seems so far the list ha