HT1414 what can i do when 2009 error can when i am train to restore my iphone i need some help thank you....
i need some help restore my iphone than you the erro mesaje is (2009) it say the iphone could not be restored. an unknown error occurred (2009).
http://support.apple.com/kb/TS3694#error2009
If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore.
If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore.
If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above.
If the issue persists, it may be related to conflicting security software.
Similar Messages
-
Dear Iphone fans,
Recently, somehow I can't hear sounds when talking on my iphone4 either when calling or being called. When asking them later, they said they can hear me but my sound become very low and unclear. And I can't hear a thing at that time. Could anyone tell me how I could fix the problem.
I've bought this one for half a year. I need your help~
Thank you in advance.Dear Iphone fans,
Recently, somehow I can't hear sounds when talking on my iphone4 either when calling or being called. When asking them later, they said they can hear me but my sound become very low and unclear. And I can't hear a thing at that time. Could anyone tell me how I could fix the problem.
I've bought this one for half a year. I need your help~
Thank you in advance. -
when i try to re download apps for macs, it saws sign in for purchase history then nothing happens. i could really use some help. thank you
Hi,
You've come across a MAS bug.
Install the v10.6.7 combo update here.
Restart your Mac after the update is installed.
Instructions for re downloading apps here.
Carolyn -
HT1414 an error 1015 popped out and it stopped restoring my iphone 3g. Please help
error 1015 stopped restoring iphone 3g. Please help find solution here
This most often means that you previously hacked your phone to downgrade the iOS or jailbreak, and the modem baseband (firmware) was altered. In that case, SOL - there is no way to restore or update to a stock iOS again.
There are some "alternative" methods that will get the phone out of recovery mode and usable again, but it will remain in a hacked and unstable state. Google to find these.
"Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state." -
Need some help if you can with my S3
I have been trying to change the sound of when a text comes in and I can't seem to figure out how to change the sound. I keep changing the notification sound but that doesn't do it. I hit text messages and then the menu and there is nothing there to change it. What am I doing wrong? I test with my husband allot during the day but If I can't hear the text I can't respond to him. Thank you all soo much for your help!
Actually, you can modify ringtone for each contact by opening up Contacts, persons name, and it has Ringtones. Under Ringtones, it has Default... you can change that to whichever... although I am not sure whether that is a text ringtone or a call ringtone...my bet is on the call ringtone...
-
Oralce 8.1.7 for Solaris 8 on x86.
I need it badly. Thank you!I've looked at it and it seems fine. It might have been a temporary glitch - let us know if you continue to have trouble.
OTN -
i need some help. im getting error -69 when trying to sync my ipod. i dont kno what to do. ive tried googling as much info as i can on this subject but i cant seem to find a answer to get me off to a good starting point. i back all my music up on a external hard drive.
If the file was not originally from iTunes, you'll need to redownload it from it's original source or rerip it from the CD. Files can sometimes go bad and become corrupted. As to how or why that happens, there are a number of ways.
What format are the problematic tracks in? Have you tried converting them to another format in iTunes?
iTunes: How to convert a song to a different file format
B-rock -
I just replaced my iPhone 5 because of a cracked face. I backed up the old phone to iTunes. When I tried to restore my data off of iTunes to the new phone, I got an error message saying that iTunes could not restore the iPhone because not enough free space is available on the new iPhone. Now what?
I have Apple Care+, but I'll be darned if I can find any way to contact anyone at Apple to talk to about this. They take your money, but make darned sure they don't have to support you unless you jump through a bunch of hoops first, like this site.I've done a restore.. The phone was completely wiped back to factory settings.. It then tells me there isn't enough space on the phone to restore from back up? How when the phone is empty?!
-
How can i fix a 4280 error code when trying to burn cd's on itunes
How can I fix a 4280 error code when trying to burn cd's on itunes for windows? Model drive is drive D: TSSTcorpCDRWDVD TS-H492C
Did you by chance find out a solution with your problem? I am having the same issue with the same drive. I even uninstalled iTunes and completely reinstalled it.
Thank you for any help anyone can offer. I'm not having any luck finding answers on the net. Thx. -
When ordering a project I'm getting a message " an error occurred while contacting the Apple online store. Please try again" Can anyone please tell me why I might be getting this message and how to fix the problem. Thank you
I've got the same problem.
It wasn't the case before the upgrade to v 9.2 (Iphoto 11) yesterday.
The previous solution preferences - advanced - "select a store" (last option) doesn't solve it anymore.
Thanks! -
i'm downloading my apps from my desktop, but when i'm downloading apps from my laptop, the apps can't be transfered. what setting could i adjust so that i could transfer my apps from my laptop to my ipod touch4. Thank you very much-ariston
You can only sync to one iTunes Library/one computerbut you can manage music among different computers. See:
Using iPhone, iPad, or iPod with multiple computers
The only way to sync app from the desktop computer is to make that the syncing computer. You can't sync app from more than one iTunes Library/one computer.
To make the desktop computer the syncing computer you have to:
- get all apps and other item on the desktop computer
- Authorize the computer for the iTunes accounts inquestion
- Connect the iPod to the desktop computer and make a backup by right clicking on the iPod under Devices in iTunes and selecting Backup
- Restore the iPod from that backup -
Hi, I'm unable to use my speaker when I'm using Mac OS, which means I'm unable to unmute, decrease or increase the volume. However, I'm able to do so for Windows 7 OS on Bootcamp. Can anyone please advise on how to rectify this problem? I would greatly appreciate your help, thank you.
Hi Zac, sorry to hear about your troubles, but that's why us other users are here to try to help in these instances.
Open Console in Utilities & see if there are any clues or repeating messages when this connection drop happens. -
I am currently using an ipod touch 3. When i record in voice memos with the apple earphones(with an inbuilt mic) i can see on the screen that its recording;
but when i hear it, its just a long beep. Need some help!Does the mic work for other apps like Voice Control?
Does the mic work OK in other devices?
Have you tried it with another mic?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
Just bought a used IMAC A1311 core 2 duo, and there are something called Bootcamp and Window7 on it, and i log in to Window7 and stupidly partition hdd on it, and i think it has formatted everything. now the window7 is error and I do hold (alt) key when I start up the machines , it show only the window7 hdd and i don't see any Recoery HDD........what should i do? Really need some helps right now.........
There are several models that use A1311. So I don't know exactly what model you have. If you received installer discs with the computer, then you will need to boot from Disc 1, erase the drive, and install Snow Leopard. Some models in the A1311 line can use Internet Recovery:
Install Mavericks, Lion/Mountain Lion Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
This should restore the version of OS X originally pre-installed on the computer. -
A while back I downloaded about 15 gmail accounts so that i could cancel the gmail accounts ...
all was working fine ... but recently when I started thunderbird ... there was only 1 of the downloaded accounts remaining ... and even it was empty ..
I need some help in finding all the lost accounts and emails
Thank youAssuming you are talking about imap accounts.
This is the process you would use:
You synchronised those accounts to download a copy to your computer.
Then you stopped the synchronising, so that the accounts did not keep updated to be the same as the server.
Then in Offline mode you would move all of those accounts emails into Local Folders, so that you would be able to delete the imap email accounts and keep all emails on your computer.
One possibility:
If the imap email accounts were still able to synch with the server and you had stopped the mail account, it may have done a final synch with an empty server, thus deleting all the emails to match the server. Synchronised imap accounts keep updated to match what the server folders contain.
First check to see if there are any emails in your Profile folder.
make hidden files and folders visible.
* http://kb.mozillazine.org/Show_hidden_files_and_folders
In Thunderbird:
* Help > Troubleshooting information
* click on 'show folder' button
A new window opens showing your profile folder.
* click on 'ImapMail' folder
Do you see a list of your imap mail accounts?
If yes. click on an imap account name
Can you see eg: Inbox (not Inbox.msf) or any other folders you created which show as files with no extension - not *.msf?
If yes, do they have a decent size?
you can open these files using eg: Notepad to see if emails are listed.
If you can see only one imap mail account, check to see if there are any emails as previously described.
Then check to see if there is more than one Profile.
Click on the 'Profiles' in address line...see image below.
In my example I only have one xxxxxxxx.default account and it is open on that Profile.
If there is more than one, select the other Profile and check again for the imap mail accounts as previously described.
Please report back:
Did you stop synchronising those imap mail accounts?
Did you move a copy of all emails into Local Folders?
Did you stop/remove the mail accounts on the server?
Do you have one or more Profiles?
Do you see the imap mail accounts in the Profile folder?
Do you see any files containing the emails?
Additional:
After synchronising, downloading, stop synchronising.
Did you create a backup of the Profile folder?
Maybe you are looking for
-
Hi Experts, I have a Workflow which triggers on record update. After the start step i have 3 assignment Fields and then Some validations etc. I can see that this workflow is stopped at First assignment step Some times with Error. And when i Open the
-
Is it Possible to play SIMS on my iMac?
Hey everyone, I was just wondering if it is possible to play any SIMS games on my iMac. Is there anyway i can download it from a gaming site or if i can, would i have to buy it as a gaming shop? Thanks in advance
-
Westell 9100EM Firmware update address?
Looking at the 9100EM firmware address page that checks for the most recent firmware hupgrade has an invalid ip address listed in there. What is the correct address that should be listed here for this?
-
Hi friends , Could someone tell me what is the general FI to CO recon report
-
Hi guys, To simplify my jsp's in a portal 8.1 application I am considering implementing some custom tags for often used constructs. In this task I would like to pass some objects to the task-handler and wonder if I can utilize dynamically attributes