HT1414 what happens when child sets a lock and your iPad becomes disabled because we don't know passcode
What do you do when your child enters a pass code and forgets it therefore leaving the message "iPad is disabled connect to iTunes?"
Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times.
Similar Messages
-
What happens when your iPad crashes,and had to be restored and lost movies I rented that I didn't get to watch,and are gone after the apples tore restored iPad
You can try contacting iTunes support and see if they will grant you a re-download of them : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
-
HT5787 what happens when someone sell second iphone and does not give you the correct password
what happens when someone sell second iphone and does not give you
If you are talking about activation lock you are out of luck. Without that information you cannot activate the device and have just lost your money. Unless you can find the person and get your money back.
-
What happens when we delete trillion records and issue a commit.
Q1. what happens when we delete trillion records and issue a commit and also is there any way to calculate that how much time this commit will take to complete the process?
Q2. how do interpret the oracle execution plan?
cost, cardinality, rows, etc...dba wrote:
Q1. what happens when we delete trillion records and issue a commit and also is there any way to calculate that how much time this commit will take to complete the process?Since you're modifying the blocks, Undo will be generated for the modified data and change vector will be recorded in the redo log buffer.(and surely your records will be deleted ;) )
The timing of a Commit doesn't depend on the size of transaction.
dba wrote:
Q2. how do interpret the oracle execution plan?
cost, cardinality, rows, etc...Oracle documentation should help you, just google for that. You should also visit 'asktom.oracle.com' for the topic. I'm going through a book 'Troubleshooting Oracle Performance' written by Christian Antognini and I feel it contains very good explanation on such topics.
Regards,
S.K. -
my ipad is disabled because my daughter changed the passcode and then she forget it and now we tried several times and the ipad is sdisabled and says to connect to itunes what do i do to undisable it?
Try this first - I saw a recent post where a user with the same problem after an iOS update used his Apple ID password.
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
If the iPad was running iOS 7, iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
i have iphone 4s and can't activate it because i don't know what it the apple id and password and its like a 3rd hand, so its original owner is impossible to reach. what i can do to activate it.
Nothing without the Apple id used to activate the iPnone
Activation lock is an anti theft method
http://support.apple.com/kb/HT5818?viewlocale=en_US
There is no way round the lock without the correct iD and Apple will NOT assist in any way
Get yoiur money back it is now an iBrick -
I purchase iPhone 3GS and 4 and 4s from eBay and Amazone sometime from best buy all of that is ok but now befor 3 or 5 week I purchase one white iPhone 4s is locked and I can't active it i don't know why serial number c39*****dtd0
<Personal Information Edited by Host>Only the Apple Store sells unlocked iphones in the U.S
-
What happens when I erase all content and settings?
I gave my son my iPhone 4. We just put his sim card in and it started working and I told him to change the apple id to his. However, this morning, he said that he still gets my iMessages. So we did an erase all content and settings. Now the phone doesn't work. What do we do?
When you erase all contents and settings - it wipes the phone clean.
If your son gets your imessage, on his phone go to settings - message - send&receive - uncheck or remove your apple id. -
What happens when I set attenuation values in 5660 vis
Hello,
I am using the 5660 vis and I noticed that you can use auto attenuation or you can set your own attenuation values. When I disable auto attenuation and try to set my own values I never see a difference in my SA display. Is this correct behavior?
Thanks!Hello ness4,
The Auto mode sets the mixer level for you.
For all reference levels > -20dB, the mixer level gets
set to -20dBm.
For all reference levels <=-20dB, the mixer level is
equal to the reference level.
Basically, for reference levels >-20dB, the attenuation
can be calculated using the formula in the attached screenshot.
For reference levels <=-20dB, the attenuation is set to
0.
Message Edited by Robert F on 01-02-2008 04:17 PM
Respectfully,
Rob F
Test Engineer
Condition Measurements
National Instruments
Attachments:
RFSA_Attenuation_Help.png 11 KB -
How do I reset it? I don't have any access to any previous information on it.
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
Hi I'm Zeina Halim. I have an iPad 4 and I forgot its password. So I kept trying over and over again till it said iPad is disabled connect to iTunes. One problem I've never synced my iPad and apple is telling me the only way to reset the password is to erase all data from the iPad. So I'm asking is there another solution or can I atleast import the photos on some device before I erase it. Pls answer fast because I REALLY need to use it. Thank you
~ZeinaIf iTunes doesn't recognize it, do this:
http://www.apple.com/support/ipad/assistant/itunes/ -
Lost my iPod, remotely locked it through iCloud. What happens when the battery goes out?
Hello!
I lost my Ipod, but managed to locate and lock it remotely through Find my iPod and iCloud. It was located once, but hasn't been located again in the last four days. I think the battery may have run out. What happens when the battery is charged and the iPod turned back on? Does the lock and everything else that can be controlled with Find my iPod still apply?
Thank you!Yes, because when you remotely lock the iPod via Find my iPod, the lock code is set as the lock code that you would use to unlock the iPod if you used a passcode normally. As long as the iPod is still connected to your Apple ID, Find my iPod should work as log as the iPod is connected to wifi.
-
My iPad is disabled because I can't remember the password. I cannot restore it because in order to do that, I need to turn off "Find My iPad." I cannot turn that off because the iPad is disabled. I don't know what to do.
I had this problem. One day I went to use my iPad and it said disabled... I went to itunes to restore it and I got the same message you got to turn off Find My iPad but couldn't because I something was wrong with my password. My iPad only uses Wifi and I noticed it wasn't connected to my wifi (yet, I'm at home) so I couldn't go to iCloud and wipe it. I did find this to be helpful and now I'm back and running:
Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
Continue holding the Home button until you see the Connect to iTunes screen.
iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device. -
What happens when I restore data to a non-factory set iPhone?
Okay, another iCloud question. What I did was basically delete a game, start a new one, and now I want my old game back (saved to ICloud). What happens when I restore full data to a non-factory set iPhone? Will it overwrite current data? Will it delete everything? I just want to know, I'm such an iOS noob. :-/
A restore is all or nothing.
If a backup is restored to the device, ALL data currently on the device is wiped and replaced with the data from the backup.
Restoring a backup to get one saved game back seems rather extreme and silly. -
What happens when your iphone charger sets on fire and you tell apple about it ?.
what happens when your iphone charger sets on fire and you tell apple about it ?.
They make a decision. How did you tell Apple about it?
Maybe you are looking for
-
I lost my phone and the location service is off. Is it possible to turn it on from another device?
I lost my phone and the location service is off. Is it possible to turn it on from another device?
-
Question from worse than Newbie about digital signatures and Adobe Reader.
1st, thanks for taking the time to even look. 2nd, We are trying to use digital signature pads with PDF documents created by Documaker 11.4. In Adobe Pro there is a setting "Extend features in Adobe Reader" that will allow users with Adobe Reader to
-
I have Elements 10 when I select a thumbnail from organizer it will not open in editor what do I do?
I have Elements 10 when I select a thumbnail from organizer it will not open in editor what do I do?
-
Import and Export MDL error with OWB Release 2
Getting the following error when importing and exporting MDL - any assist would be appreciated - never had this issue with previous releases - error as follows: Error occurred exporting metadata to file "C:\TEMP\MY_PROJECT-20061208_1058.mdl". java.la
-
MIR7 - USER RESTRICTION IN PARK & POST
Dear Guru, I have scenario where I would like to place user restriction for parking & post of document in MIR7, further there is any kind of validation check I can place or authorisation check from bases will do or any other way pls advice in detail.