HT1414 what if when i click "restore" it doesnt work.?

what if when i click "restore" it doesn't work?

Make sure you have the Latest Version of iTunes (v11.1.5) Installed on your computer
iTunes free download from www.itunes.com/download
Then... See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
Note. Once the Device is asking to be Restored with iTunes... it is too late to save anything... and you must continue with the Recovery...

Similar Messages

What happens when i click restore?

I accidently deleted a video i recorded on my touch. If the video was there the last time i synced it and i haven't synced it yet, can i recover it? Do I restore?

If you created a backup after recording the video, then just restore from a backup using iTunes.
iPod touch: About backups

When i plug in my ipod , it says it has found an ipod in recovery mode and that i need to restore it , when i click restore error 3194 shows up . what should i do ?!

When i plug in my ipod touch, itunes says that it has found an ipod in recovery mode and that i need to restore it in order to use it. But when i click restore, a pop up comes up saying that it could not be restored because of error 3194. What should i do ? and sometimes error 21 or 20 show up, and the ipod dosnt turn on at all

See the appropriate sections in this Apple support document.
iOS: Resolving update and restore alert messages
B-rock

Im trying to restore my ipod and it used to be perfectly fine now when i click restore a box pops up and it says "The ipod software update server could not be connected." how do i fix it?

Im trying to restore my ipod and when i click restore a box pops up saying The Ipod software update server could not be contacted what do i do?

Refer to this article:
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/TS1814

Ipod screen says to connect to itunes but won't let me enter my password. Tried recovery mode but when I click 'restore' itunes says it cannot connect to update server. Help!

Ipod screen says to connect to itunes but won't let me enter my password. Tried recovery mode but when I click 'restore' itunes says it cannot connect to update server. Help!

Place the iPOo in recovery mode for the passcode issue. For recovery mode:
iPhone and iPod touch: Unable to update or restore
Also see:
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server

I have ipod classic,80gb,i cant restorit via itunes and when i click restore i see the error1439 plz help me

i have ipod classic,80gb,i cant restorit via itunes and when i click restore i see the error1439 plz help me.is there any software to reset it

Hello adifromba
Try putting your iPod Classic into Disk Mode to force a restore within iTunes to get it to show up. The steps to do that are within the first article below, I have also provided a second article for further troubleshooting if it continues to not show up.
Putting iPod into Disk Mode
http://support.apple.com/kb/ht1363
iTunes: iPod not recognized in iTunes and Mac desktop
http://support.apple.com/kb/TS1410
Regards,
-Norm G.

HT1212 I've been trying to restore my mini ipad to factory settings. When I click restore ipad (while its connected to itunes) it will update for a while then a pop up will say I have to enter the passcode on the ipad! IDK THE PASSWORD!!! HELP

I've been trying to restore my daughter's mini ipad to factory settings. When I click restore ipad (while it's connected to itunes) it will update for a while then a pop up will say I need to enter the passcode on the ipad!! That's the whole point of restoring the ipad. We don't know the password and it's disabled. HELP

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

HT4946 iTunes shows I have an encrypted backup under preferences. It's got the pad lock. When I click restore the encrypted backup is not an option. I've been test MDM products and may have caused this. How do I restore the encrypted backup.

iTunes shows I have an encrypted backup under preferences. It's got the pad lock. When I click restore the encrypted backup is not an option. I've been test MDM products and may have caused this. How do I restore the encrypted backup.

I just came here today to ask the same question.
I have an iPod Gen2 with version 4.2.1 iOS, and iTunes 11.0.2.26
My iPod Touch was running sluggish so I backed up and selected the "Encrypt local backup" to "back up account passwords used on my iPod".
I selected a password for this backup and restored my iPod Touch.
When I went to restore from backup, that encrypted backup is not available on the drop down list.
However, if I go to the top of ITunes and click "Edit", "Preferences" "Device", it shows the back up with the pad lock on it.
I thought I was being smart backing up with encryption to back up account passwords, but now I have lost everything.
So many people have the issue where it asks for a password when they never told iTunes to do an encrypted backup and here we are with an encrypted backup, and we know the password, but we don't get the option to restore from it.

Click-to-dial doesnt work with Basic integration

Hi,
I have built a CTI adapter to work with Oracle Basic integration. I can do all the functions through UWQ using this adapter. But the click-to-dial doesnt work. Here is the scenario->
1. Customer Call comes in.
2. Agent gets a screen pop and the relevant service request form is popped.
3. Agent answers the call, talks and then hangs up.
4. Agent clicks on the click-to-dial icon next to the customer number field on the service request form.
5. Nothing happens.
Basically, Oracle is not sending the dial string to my adapter at all. I am expecting Oracle will pass the dial string to the CTI adapter to let it place the outbound call as it does in Direct integration. In Direct integration, the CTI adapter does get the dial string from Oracle when agent clicks on "initiate call". Any idea why this is not the case with Basic? Is it not supported with basic?
Here are the java console logs after I hit "Initiate Call" from the SR form ->
Tue Sep 22 14:20:03 EDT 2009] - [controllerPlugin:verbose] - getPluginUID()
[Tue Sep 22 14:20:03 EDT 2009] - [controllerPlugin:verbose] - getSupportedMediaTypes()
[Tue Sep 22 14:20:03 EDT 2009] - [controllerPlugin:verbose] - getSupportedMediaTypes()
[Tue Sep 22 14:20:03 EDT 2009] - [INFO] - SOFTPHONE:SoftphoneWrap:PLUGIN CONTROL METHOD command:
     [Command = occtDial
     MediaType = INBOUND_TELE
     Args Array:
     55227
     100044952
     +(804)4198614
[Tue Sep 22 14:20:03 EDT 2009] - [EVENT-INFO] - SOFTPHONE:EVENT NAME NOT FOUND--MEDIA ITEM EVENT/PLUGIN CONTROL METHOD
BEGIN SOFTPHONE INBOUND EVENT DATA:{occtMediaItemId=55227, occtAgentID=100044952, occtDestination=+(804)4198614}
<<<<<<<<<<<<<END SOFTPHONE INBOUND EVENT DATA
[Tue Sep 22 14:20:03 EDT 2009] - [INFO] - SOFTPHONE:SoftphoneWrap:PluginControlMethod:Command::occtDial
[Tue Sep 22 14:20:03 EDT 2009] - [INFO] - SOFTPHONE:SoftphoneWrap:PluginControlMethod:Creating a UWQMediaCommand 2
[Tue Sep 22 14:20:03 EDT 2009] - [INFO] - SOFTPHONE:Softphone:converHashtoArg:Incoming Hashtable={occtMediaItemId=55227, occtLineIndex=0, occtAgentID=100044952, occtCommand=occtDial, occtDestination=+(804)4198614}
[Tue Sep 22 14:20:03 EDT 2009] - [INFO] - SOFTPHONE:Softphone:convertHashtoArg:processing key:occtLineIndex
[Tue Sep 22 14:20:03 EDT 2009] - [INFO] - SOFTPHONE:Softphone:convertHashtoArg:processing dataType:int
[Tue Sep 22 14:20:03 EDT 2009] - [INFO] - SOFTPHONE:Softphone:convertHashtoArg:Adding Key=occtLineIndex
[Tue Sep 22 14:20:03 EDT 2009] - [INFO] - SOFTPHONE:Softphone:convertHashtoArg:Adding Integer value=0
[Tue Sep 22 14:20:03 EDT 2009] - [INFO] - SOFTPHONE:Softphone:convertHashtoArg:processing key:occtDestination
[Tue Sep 22 14:20:03 EDT 2009] - [INFO] - SOFTPHONE:Softphone:convertHashtoArg:processing dataType:string
[Tue Sep 22 14:20:03 EDT 2009] - [INFO] - SOFTPHONE:Softphone:convertHashtoArg:Adding Key=occtDestination
[Tue Sep 22 14:20:03 EDT 2009] - [INFO] - SOFTPHONE:Softphone:convertHashtoArg:Adding String value=+(804)4198614
[Tue Sep 22 14:20:03 EDT 2009] - [INFO] - SOFTPHONE:SoftphoneWrap:UWQmcToUWQmcdoArray:occtCommand :occtDial
[Tue Sep 22 14:20:03 EDT 2009] - [INFO] - SOFTPHONE:SoftphoneWrap:UWQmcToUWQmcdoArray:passing argument:0
[Tue Sep 22 14:20:03 EDT 2009] - [INFO] - SOFTPHONE:SoftphoneWrap:UWQmcToUWQmcdoArray:passing argument:+(804)4198614
[Tue Sep 22 14:20:03 EDT 2009] - [INFO] - SOFTPHONE:SoftphoneWrap:PluginControlMethod:Finished creating UWQ Media Array
[Tue Sep 22 14:20:03 EDT 2009] - [VERBOSE] - SOFTPHONE:SoftphoneWrap:PluginControlMethod:executing mediaControlMethod
[Tue Sep 22 14:20:03 EDT 2009] - [providerPlugin:verbose] - preprocessMediaCommand( Provider UID = null
     Command =
     [Command = occtDial
     MediaType = INBOUND_TELE
     Args Array:
     0
     +(804)4198614
[Tue Sep 22 14:20:03 EDT 2009] - [controllerPlugin:verbose] - getPluginUID()
[Tue Sep 22 14:20:03 EDT 2009] - [controllerPlugin:verbose] - getSupportedMediaTypes()
[Tue Sep 22 14:20:03 EDT 2009] - [controllerPlugin:verbose] - getSupportedMediaTypes()
[Tue Sep 22 14:20:03 EDT 2009] - [INFO] - SOFTPHONE:SoftphoneWrap:PLUGIN CONTROL METHOD command:
     [Command = occtSoftphoneToFront
     MediaType = INBOUND_TELE
     Args Array:
     100044952
[Tue Sep 22 14:20:03 EDT 2009] - [EVENT-INFO] - SOFTPHONE:EVENT NAME NOT FOUND--MEDIA ITEM EVENT/PLUGIN CONTROL METHOD
BEGIN SOFTPHONE INBOUND EVENT DATA:{occtAgentID=100044952}
<<<<<<<<<<<<<END SOFTPHONE INBOUND EVENT DATA
[Tue Sep 22 14:20:03 EDT 2009] - [INFO] - SOFTPHONE:SoftphoneWrap:PluginControlMethod:Command::occtSoftphoneToFront
[Tue Sep 22 14:20:03 EDT 2009] - [VERBOSE] - SOFTPHONE:SoftphoneGUI:icWorkFrame.toFront
Edited by: user653223 on Sep 22, 2009 2:03 PM

actually its a website software, i just bought you can check the demo www.edirectory.com, and it has a light platform "virsune" for mobiles .. i checked it on my iphone and it works pretty good, altho i checked it on samsung "android" it works on chrome and Opera mini only, and what am talking about is the option click phone number to call a member

HT1414 what happens when child sets a lock and your iPad becomes disabled because we don't know passcode

What do you do when your child enters a pass code and forgets it therefore leaving the message "iPad is disabled connect to iTunes?"

Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times.

What happens when you click SUBMIT ? URGENT HELP

Hi,
I have a requirement where I want to know all the records that are submitted this year.
Can anybody tell me which column gets auto populated (Vanilla funcationality) in S_EVT_ACT when we click the Submit button ??
Thanks :-)

Hi,
Thanks for the help.
I am using Siebel ePharma 7.7.2.6.
No I will not be able to use the Start Date. I want the records submitted this year because of which I cannot use Start Date.
In S_EVT_ACT, there is a column Call_Submit_Date. But that dosent get populated by default. I wanted to know is there any column which get populated by default (Vanilla functionality) when you click Submit button.
Thanks :)

Session Restore isn't working!!!!!!!! Both my mac laptop and Windows 7 desktop no longer respond when I click "restore previous session" Please get this fixed asap, as it is my most used feature on FireFox!

System Restore is not working!!! Both my mac laptop and now my Windows 7 desktop will not allow me to restore previous sessions.

Try to use the "Restore Previous Session" entry in the History menu instead.
See also:
*[[/questions/892970#answer-271366]]

When-mouse-click trigger is not working

Hi,
My forms version is 10g.
I've a black level and item level when-mouse-click trigger.
There is some code inside that which is not being executed.
To test, i simply printed a hello message inside the trigger's code.
Even hello is not being displayed.
Can anyone please help me in why this trigger is not working.
Navnit

You have some other issues going on if you don't see anything from a when-mouse-click trigger.
First of all, are you spelling the trigger using a dash or underscore? WHEN-MOUSE-CLICK will run, but WHEN_MOUSE_CLICK will not.
Have you set :SYSTEM.Message_Level to some value above zero in the form? If so, set it back to zero.
On what object are you trying to click? Is this causing navigation? Navigation may cause validation to run, which may fail, which may prevent the navigation, which may prevent your when-mouse-click from running.
And last, are you sure you are running the currently compiled fmx version of your form?
When nothing works, you need to back up and start finding out what DOES work first.

Redirects when I click a link, but works if I type the URL

I have a MacBook with Tiger and Safari. All currently updated. I have an email with a link to the person's homepage. When I click it, it goes to his old homepage, which used to be listed in his emails. If I type the URL in the link, it goes to the new page, as it should. It doesn't do this on any of my other computers (two macs, two pcs).
Can't be a host file, or typing the URL wouldn't help.
I used Onyx to clean cache, including system cache. Cleaned cache from Safari. Deleted the Safari cache from my libray/users/caches/ folder. Restarted, rebooted. Deleted cookies, deleted history.
What could be doing this? More perplexing, how would it know what link this guy USED to use in his emails, but no longer does?
Spooky...
MacBook Windows XP Tiger, of course

Interesting suggestion. I installed PithHelmet (Pretty cool, by the way) and told it to remove the referrer headers. No joy. Still doing the redirect. You are on to something as to how it's doing it, though. I'm using Yahoo mail. If I log into another mail account using this machine, and click this link in a message, it goes to the right page. So, the link is only broken on my machined, while logged into Yahoo mail AS ME.
If it's any more help, the correct site is an iWeb page. The old one it keeps sending me to instead is on geocities.

HT1212 what do you do if the restore button doesnt work?

If anyone can help i would really like to know what to do if the restore button doesn't work. I have been locked out of my ipod for months.

recovery mode
open itunes on computer
plug cable into computer not iOS device
turn device off
hold home button and plug cable into IOS device. do not release home button until an itunes graphic appears on IOS device.
look to computer should have message about recovery mode click ok and restore
Peace, Clyde
if u need an article see
http://support.apple.com/kb/HT1808

HT1414 what if when i click "restore" it doesnt work.?

Similar Messages

Maybe you are looking for