HT1414 when trying to restore my ipad gen 1 it hangs on "Verifying ipad restore with Apple" then returns an error 1602
I have tried to restore my ipad gen 1. When it gets to the Verigying ipad restore with Apple" it seems to hang then returns the error 1602. I have the black screen on my ipad so cannot get to the shut down bar. The ipad has not been tampered with or jail broken. it suddenly would only show the apple symbol for 5 or so seconds then go to a blank screen and then 30 or so seconds later show the apple symbol again. This only happens when plugged into its factory charger.
Have you tried the troubleshooting on this page : http://support.apple.com/kb/TS3694#error1603 ?
Similar Messages
-
I keep getting an error message when trying to log on to FaceTime and iMessage on my iPad mini with wifi...Could not sign in. Please check your network connection and try again. Help!
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
Cheers, Tom -
i keep getting this message when trying to update my old 3g-"the iphone could not be restored-an unknown error occurred (-1)-any ideas? anyone?
i have done that
same result
the phone has a sim in it that is not active. does this cause the fault in question? -
Tried to open an app and my iPad gen one froze. It only shows the apple on black screen and will show the operating wheel sometimes and while plugged in it will beep every few minutes. Will not load one show anything on screen but the small white apple.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Lightroom 4 crashes when trying to open the slideshow module. I spent over three hours with both Adobe and Apple tech support and we know it is a permission issue but have not been able to get it solved. It started with the last upgrade to 10.8
Back up all data.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -Rh $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
The first step should give you usable permissions in your home folder. This step will restore special attributes set by OS X on some user folders to protect them from unintended deletion or renaming. You can skip this step if you don't consider that protection to be necessary.
Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
resetpassword
That's one word, all lower case, with no spaces. Then press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
▹ Restart
from the menu bar. -
I am getting a error IO when trying to upload multiple images within wordpress using the flash uploader. I do not get the error when uploading using explorer. The error only appears if I try uploading using firefox....any ideas?
Logged the call with SAP who directed me to 'Define settings for attachments' in IMG and setting the 'Deactivate Java Applet' & 'Deactivate Attachment versioning' checkboxes - problem solved.
-
A magazine's app on my iPad has stopped working. When I open the Newsstand folder and click on the app, the screen dims briefly, then returns to the Newsstand folder. The other app in my Newsstand folder (Wall Street Journal) opens without any problem, and this magazine's app opens just fine on my wife's iPad.
I have deleted the app and reinstalled it from the Apple store and that makes no difference. I have also done a hard reboot on my iPad with no result.
Any thoughts about what might be wrong?Hey everyone in Apple world!
I figured out how to fix the flashing yellow screen problem that I've been having on my MBP! Yessssss!!!
I found this super handy website with the golden answer: http://support.apple.com/kb/HT1379
I followed the instructions on this page and here's what I did:
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
I went through the 6 steps above twice, just to make sure I got rid of whatever stuff was holding up my bootup process. Since I did that, my MBP boots up just like normal. No flashing yellow screen anymore!!
(Note that I arrived at this solution when I first saw this page: http://support.apple.com/kb/TS2570?viewlocale=en_US)
Let me know if this works for you!
Elaine -
I am trying to update my iTunes to 10.5.1 so that I can upgrade my 3GS phone but am getting the following error message when trying to install the itunes: Install step failed: Run pre upgrade script for apple mobile device support. Contact software manufacturer for assistance. I am on a MacBook pro running 10.5.8 OS. Has anyone seen this before and how can I get it resolved.
Thanks for your help in advance....Did you ever figure out the problem? "Contact Software Manufacturer"?? That sounds ominous... I've got the same issue and I'm pretty durn aggravated right about now....
Thanks! -
I'm trying to reinstall mountain lion 10.8.2 from a recovery disk and I get the following error when I goes to verify my computer with apple,
An error occurred while preparing the installation. Try running this application again. Can anyone help?Well, I'm trying to figure out how you're doing this from a recovery disk. The only way to reinstall Mountain Lion is through the Recovery HD in the computer. Hold Cmd/R as you are starting up the computer and keep holding it. Eventually you'll get a screen asking you to select the language. Hit continue to select english and you'll get a Mac OS X Utilities Menu with the second option down being reinstall OS X.
-
When trying to view a pdf from IE10 I get a small square with an X and not the document.
When trying to view a pdf from IE10 I get a small square with an X and not the document. I have removed reader completely from the control panel and reinstalled version 11.0.4. I have IE 10 10.0.9200.16721. Need assitance in getting Reader XI setup.
Hi,
We have heard few users having similar issue as yours and found out the problem for one of the users is this: http://support.microsoft.com/kb/2716529 .
I was able to reporduce this problem(square with a 'X') by changing the TabProcGrowth registry entry to 0.
This tool provided by Microsoft is for Win 8, to run this on Win 7 you can manually change the registry setting : please see " Let me fix it myself" in above url.
Before running these steps please make sure yours indeed is the same problem.
Please be very careful as some registry settings (not this one) can create serious problems on a Windows system including causing it to no longer boo
Let me know how it goes.
Thank You. -
when trying to update my iphone 4S software to OS6 on itunes on my pc, i get an error request saying that i do not have permission to access the required resource?
Are you using iTunes version 10.7?
-
During recovery on iPhone 4 I got : The iPhone could not be restored. Un unknown error occurred ( 3004 ). Then - iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes.Then I get error 3004 again. Latest iTunes and OS updates. I cant use the phone now. I did restart the destop,unplug the usb,...etc. Same iTune logo ,arrow and USB on the screen.THANK YOU SO MUCH,...!
Perhaps the information in this Apple support article will help:
http://support.apple.com/kb/TS3694#error3004
Regards. -
While trying to burn a CD of a playlist, the disc was ejected with the message "medium write error" . What does this mean and how do I fix it?
I had been getting this all morning and checked other messages from the community. THe one which worked was trying a different brand of disc.
I had been using Verbatim which had copied the music fine off the Real Player on my PC at school, but wouldn't work with I Tunes. Tried a Staples and an Office Depot CD-R , both of which did the job. -
On iPad can I open a Microsoft word file with apple pages app?
On iPad, can I open a Microsoft word file with apple pages application? If so how do I perform this activity?
Yes you can open Word files. If it is an email attachment you can simply tap and hold down on the icon and select "open in" and then select Pages - as long as you have the Pages app on the iPad.
Where is the file on your iPad or how do you want to move it to the iPad? -
Getting the following message when trying to sync 2nd gen i-touch "itunes could not connect to this ipod because an i\unknown error occurred (0xE8000065)
Have you seen this Apple support document?
http://support.apple.com/kb/TS3221
B-rock
Maybe you are looking for
-
Data Recovery from delta loads
Hi Everybody, We pull GL Item data from R/3 to BW on a nightly basis using the 0FI_GL_4 extractor using delta updates with a process chain. The process normally starts around 01:00 CST. At around 01:37, there was a problem with the database for R/3 a
-
Dear All, I tried to load a screen using an xml of type embedded in an user defined menu. I got error message as "object reference not set" i got this error in the second line strResource = System.Reflection.Assembly.GetExecutingAssembly().GetNa
-
Can i order a custom iPhoto postcard (to US) from Thailand?
I wanted to buy a postcard I have created with iPhoto and send it to my friends in the States. Everything went well until I needed to fill in the billing address. There is no States in Thailand though. So i got stuck at that point. Anyone knows how
-
Poor Performance from Router MI424WR
Purchased Verizon internet for the first time a few months ago, was told the coverage was 200 feet from router. My home is 2 stories, have no internet in lower level (router is on top floor), cannot get signal on deck, which is literally 50 feet fro
-
Sign In and Account unresponsive !!!!
When in App Store it's impossible to sign in or to access my account. When I click on either functions nothing happens