HT1420 hey guys i have a problem with my pc i buy an iphone application from some shop around my area and when i was trayin to install to my iphone using laptop it seys autherized this computer i autherized my computer a lot of time but i cant stell insta
i have a littel problem i buy some iphone application from some shop around my area and i try to install in my iphone with laptop but i cant its seys autherize this computer and i autherized my computer a lot of time but i cant steel install any aplication into my iphone so guys please help me.thank u
Well, it seems waiting is not my strong suit..! I renamed a javascript file called recovery to sessionstore. This file was in the folder sessionstore-backups I had copied from mozilla 3 days ago, when my tabs were still in place. I replaced the sessionstore in mozilla's default folder with the renamed file and then started mozilla. And the tabs reappeared as they were 3 days ago!
So there goes the tab problem. But again when I started mozilla the window saying "a script has stopped responding" appeared, this time the script being: chrome//browser/contenttabbrowser.xml2542
If someone knows how to fix this and make firefox launch normally, please reply! Thank you
Similar Messages
-
Hey Guys i have a problem with my mac since last month and it wont boot up it freezes in a grey apple logo and and spinning gear any body know how to fix this?
Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into Recovery by holding down the key combination command-R at the startup chime, or from a local Time Machine backup volume (option key at startup.) Release the keys when you see a gray screen with a spinning dial. When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in the support article linked below, under “Instructions for backing up to an external hard disk via Disk Utility.”
How to back up and restore your files
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode by holding down the key combination command-T at the startup chime. Connect the two Macs with a FireWire or Thunderbolt cable. The internal drive of the machine running in target mode will mount as an external drive on the other machine. Copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
How to use and troubleshoot FireWire target disk mode
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Before reconnecting an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 3
Boot in safe mode.* The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
*Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Post for further instructions.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is damaged and the drive is probably malfunctioning. In that case, go to step 5.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 4
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 5
Launch Disk Utility in Recovery mode (see above for instructions.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it produces. Look for the line "Permissions repaired successfully" at the end of the output. Then reboot as usual.
Step 6
Boot into Recovery again. When the OS X Utilities screen appears, follow the prompts to reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.
Step 7
Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a backup.
Step 8
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested. -
Hi Guys,
I have a problem with Importing Pictures onto my Mac mini with Lion installed by using a Card Reader,
What is the problem here so I can get Pictures onto my Computer. ,Hi Noob Søren
There are a few things that are confusing in your question.
As far as I know, you dont have to install Time Machine on this OS as it is already installed for you. You only need to connect a hard drive to your computer via firewire or usb, click on the Time Machine icon, Open Time Machine Preference in the drop down menu and select a disk: your connected hard drive.
You can of course reformat this connected device, partition it into a few volumes to organise data if you so wish.
I find it strange that your mac's hard drive is divided into two volumes... perhaps this was created through bootcamp?
You can access the configuration of your hd through Applications/Utilities/Disk Utilities.
Clicking on one of the icons on the right hand panel will bring the details of the contents of your hardDrive and volumes. From there you can decide to erase a partition, reformat etc....
If your hd contains more than one volume, and one of them is empty, you could decide to remove it. Back up all your important data before doing so.
Hope this helps
WN -
Hey guys i have a problem by installing Adobe Premiere Pro Cs4.
Hey guys i have a problem by installing Adobe Premiere Pro Cs4. I am german and 14 years so sorry for by bad english... I downoadet the setup, installed all the software, but when i wanted to run it the first time, adobe sayd: You have to estart your computer, if hat doesnt work ask our support...mistake (dont know what the right word for mistake code is) code is 131:4, now i hope that you can help me by installing the software in the right way!
I hope you can help me...Na was für'n Computer? Hast du den Neustart auch wirklich gemacht? Warum CS4? Klingt einfach so, als ob du das Ganze mit unzureichenden Benutzerrechten gemacht hast und somit die Installation nie richtig fertig wird...
Mylenium -
I have a problem with my itunes. I cannot transfer apps from the itunes to my iphone 4s. Any time I try to snyc itunes tells me "The iphone could not be synced because this computer is no longer authorized for purchased items that are on this iphone. To authorize this computer for items purchased from the itunes store, choose, Store > Authorize This Computer. But anytime I authorize it tells me you have authorized including this computer 2 out 5 computers. And if I try again the same story over and over again. But I have many apps on my itunes which I want to transfer. Please someone help me.
Well Authorize the Computer...........
-
Hi guys, I have a problem with imessage. My iphone 4S is factory unlocked and i have been using t-mobile carrier. i tried settings - messages - imessage on but there is this 'waiting for activation' thing. Does anyone know how to solve this?
Thanks!If you are in the UK:
Please upgrade your plan to Web n Walk plus. One of our users on T-Mobile UK had this to report back to us:
T-Mobile UK are in fact port blocking to ensure fair usage on their base Web and Walk Plan. I have upgraded to Web and Walk Plus and as a result the port blocks are lifted and I get a higher data allowance!
We were also recently contacted by T-Mobile UK, who stated the following:
Any smart phone (iphone, android etc) that is bought directly from T-Mobile should be automatically provisioned with Web n Walk plus, if customers have bought a handset sim free then they will need to call customer services and get this added. It is free of charge for most price plans (including new plans) but some older plans will generate a charge of £5pm for this. -
Hi Guys, I have a problem with Rosemount Radar Level Trasnmitter Model 5400 series with Foundation Fieldbus, the indication of radar in NI-FBUS software configurator was good no Error, but when I try to connect the segment to the Centum VP DCS, the radar lost in the list, but another device in the segment still in the list, only the radar lost from the list.please your advice what make the radar lost in the list?, Thank you
Attachments:
Radar Level Tranmitter 5400FF.pdf 516 KBHi Nanda,
Would you check if the addresses of the device conflicts with one of the new devices in the cascaded segments?
If this is not the issue, can you try to see what happens if you only use this one device with the same procedure you have done? Just wanna try to narrow down where the problem is. A capture by FBUS Monitor is even better.
Thanks. -
hey !
I have a problem with my iphone 5s IOS 8 , my notification center does not scan when the screen is lockedsounds like a hardware failure. Return the phone to Apple.
-
when ever i try to install photoshop cc on my laptop i keep getting this error "We've encountered the following issues installer failed to initialize. Please download adobe support advisor to detect the problem."
start at the top and work your way down applying applicable fixes until your problem is resolved.
if cc (win): https://helpx.adobe.com/creative-cloud/kb/creative-cloud-desktop-application-failed.html
if, your error is:
"Installer failed to initialize. File not found." or "Installer failed to initialize. This could be due to missing files."
first, rename OOBE Folder to OOBE.old.
to find OOBE:
64 bit win OS: Program Files x86\Common Files\Adobe\OOBE
32 bit win OS: Program Files \Common Files\Adobe\OOBE
mac os: HD>library>application support>adobe>caps
mac os: USER>library>application support>adobe>OOB
if that fails or isn't the exact error you see, uninstall, clean (http://www.adobe.com/support/contact/cscleanertool.html) and reinstall.
if you're using a dvd to install:
copy the disc contents to a desktop directory and install from that directory.
if you're using a mac:
1. Try to Create a new user account in Mac with Administrator Priviledges.
2. Login to the New user, Navigate to Mac HD> Application> Utilities> Adobe Installer folder, Locate products like Adobe Reader, Adobe Flash, Adobe Air and un-install them
3. Navigate to User Library> Application Support> Adobe and move Adobe to Trash.
4. Navigate to Mac HD> Library> Application Support> Adobe and move Adobe to Trash.
5. Start the installation again.
if everything applicable above fails, check your installation logs:
http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-install-using-logs-elements.html -
I have a problem.
I bought Pages and Numbers for my iMac and so far everything was OK.
Suddenly i have a problem with connection to iCloud.
Dokuments created on iMac in Pages or Numbers are not transfered to iCloud. Not uploaded to iCloud. There is a sign (small shape of iCloud), that they are waiting to be uploaded to iCloud.
I think the iCloud is OK.
i can see and manage documents in iCloud. i can create them on iPad and see them and delete them in iCloud.
But not on iMac.
i dont know what has happened and I am not abble to find the solution. It was OK till some days ago….I have a similar problem! Everything stopped working after upgrading to Mac OS 10.8.4 through the App Store. Help!
-
I have 2 problems with Mail. I cannot address an email to more than one recipient. And I receive some emails more than once. Can you please help?
Restart your Mac. See if that makes a difference.
-
i have a problem with my Imessage at my macbook pro ,its says it can contact the server and i cant use it ,please solve me this problem
I am having the exact same problem with the iMessage on both my MacBook pro and my iphone4. It either says the username/password is incorrect or it can not contact the server. Facetime and iCloud works just fine with the same apple id and password. Somebody please help, I am beyond frustrated!
-
Hi, I have a problem with fonts because in the window I can't see the font, they are transparent. how can I fix this?
giadad,
It sounds as this issue:
Open System Preferences and go to Accessibility. Next, select Display from the source list along the left, then check the box labelled Reduce transparency.
It was first presented in this post #15 by TheUlser:
https://forums.adobe.com/message/6854594#6854594
It has been described on this Adobe page:
http://capitalmacservice.com/font-preview-working-illustrator-cs-5-yosemite-fix/ -
I have a problem with the aspect ratio of photos as they appear on iPhoto. They are not correct. On the original photo people were fat and squat. I tried rotating and they became long and narrow. Neither correct. Any suggestions?
Sounds more like a problem with your Display Resolution than iPhoto.
Go to: Apple / System Preferences / Displays and in the Resolutions list select,
1280 x 800 if you have a 13" MacBook Pro
1400 x 900 if you have a 15" MacBook Pro
1920 x 1200 if you have a 17" Macbook Pro -
The iTunes on my desktop is no longer recognizing any of my devices (iPads, iPods, or iPhones). I am unable to sync. And when I connect a device I am asked on the device if I "Trust this Computer". When I hit "Trust" nothing happens. Help?
Hello monkeymonkeydo,
To get this fixed use the steps found here:
iPod not recognized in 'My Computer' and in iTunes for Windows
Hope this helps.
~Julian
Maybe you are looking for
-
IPhone 5 voice call speaker problem
I took my iPhone 5 back because the speaker at the bottom didn't work at the right(I know the left one is a mic) and I got my new iPhone 5 and I was calling my friend and I needed to put it on loudspeaker phone, and I could him but he couldn't hear m
-
Hi, my brother is struggling to log in to his itunes account. He has been using an old email address but not actually logged into his email account for quite a while. All of a sudden he hasn't been able to sign in to itunes. He has been trying to cha
-
Hi, We are facing an issue with Inbound IDoc. We have a PO inbound idoc which is in status '53' but the PO document did not get created. Can you please help us if anyone faced similar issue. Thanks, Anil
-
Company name in Internet Explorer Title Bar When Portal URL is launched
Hai Gurus, I want to shown my company name in Internet Explorer Title Bar, when portal URL is launched. Please let me know how to do this. Thanks & Regards, H.K.Hayath Basha.
-
Why can I only open the ringtone editor once per song?
I thought the free song of the week (Carol of the Bells) had a section that would make a good ringtone. I opened the ringtone editor to see how it worked and whether I could pick out the section I wanted. I then cancelled out of the ringtone editor s