HT1420 how can i erase my brother's apple ID details from a macbook pro and make it recognize my apple ID
Hello,
Pls I need help?
1. my brother has given me his mac book but it has failed to recognise my details. His apple ID keepds popping up and it would not recognise mine.
2. i want to make mine so that i can sync my iphone and ipad with it.
How do I go about it?
Thank you
You need to delete and redownload iPhoto. His Apple ID is stored inside it.
(115778)
Similar Messages
-
How do I use AirPort Extreme to be able print from my MacBook Pro AND a PC. If I connect printer into AirPort, I can only print on laptop. If printer is connected to PC hard drive, I can only print on desk top. How do I configure this to make both print?
If you have not already done so, your chances will really improve if you....
1) Connect the printer to the USB port on the AirPort Extreme
2) Download and install Bonjour Print Services for Windows on the PC -
How can I get the old view of iCal back on my MacBook Pro and iPhone?
How can I get the old view of iCal back on my MacBook Pro and iPhone? The Mavrick version is crisp and clean but a colored dot is not the same as a highlighted word. I rely on my iCal on my MacBook Pro and iPhone 5 to help me track which of the 8 sites I visit for my job during the week - the color coding is (was key) to organizing and tracking meetings. I hate the upgrade!
If purchased through the Mac App Store then it can be installed on up to five authorized CPUs. Otherwise, it's controlled by the license that came with the software.
To install on another computer copy the downloaded installer application to the other computer. -
My Apple ID changed back to an old ID when I installed last update on my iPhone 5s. How can I change it back to match what is on my MacBook Pro and iPad?
Hi GlendaGirl,
Thanks for visiting Apple Support Communities.
It sounds like you're unexpectedly seeing the incorrect Apple ID on your iPhone 5s. You can use these steps to sign out of iCloud on your iPhone 5s and sign in with the right Apple ID:
iOS 6 and later: Go to Settings > iCloud.
If you're still signed in with your previous Apple ID:
Scroll down and tap Delete Account [Sign Out in iOS 8.] Depending on what iCloud options are turned on, you'll be asked to confirm that you want to delete data from your device. To confirm, tap Delete. (If you're using iOS 7 and have Find My iPhone turned on, you'll be asked to enter the password for your previous Apple ID. Enter the password, then tap Turn Off.) The data will be deleted from your device, but not from iCloud.
Enter your current Apple ID to sign in. The data from your iCloud account will download again to your device.
From:
Apple ID: What to do after you change your Apple ID - Apple Support
Best Regards,
Jeremy -
How can I erase a photo album that was uploaded from an old computer that I don't have no more? I have other albums in the Iphone that I don't want to delete.
If you sync with the new computer it will erase the current content from the iphone and replace with the selected content of the new computer.
The pics that you have taken with the iphone should be imported regularly to your computer as you would with any digital camera. You can then organize them and sync them back to the iphone if you wish.
If you have had itunes perform a backup on the new computer, you should get the pics taken with the iphone back, but I would import them before trying anything. -
How can I open Adobe Bridge CS6 in high resolution on my MacBook Pro Retina display?
How can I open Adobe Bridge CS6 in high resolution on my MacBook Pro Retina display? When I click Get Info, the "Open in Low Resolution" box is marked and locked. How can I unmark this box? I currently run 10.9.1. I can open Adobe Photoshop CS6 in high resolution without any problem. Any advice would be much appreciated. Thanks.
There is no such thing. In CS6 only PS itself is Retina compatible. You would have to use CC for full Retina support.
Mylenium -
I see people from different ages at my work and every month I need to count how many people from each age I've seen that month. How can I do to give the entries to numbers in a single cell and make numbers count them for me? The final result would be a spreadsheet telling there were 8 people from 20 to 39 years old, 14 peolple from 40 to 59 and so on...
jpqcampos wrote:
This appears to be an 'input form' using 'Radio Buttons' to select the category. Neither of these features are supported in Numbers '09.
You can input the data on one table and summarize it on a second table, but the input table will continue to hold data for each event.
And by using the Reorganize button, you can hide all but two rows of that table to approximate the appearance and performance of an input form.
Here are the two tables, Data on the left and Summary on the right. Notes below.
The grey-filled columns in both tables are 'working' columns, and may be hidden (as shown in the image below).
Data table:
D1 contains the word "TRUE" (in capital letters). (This row is always shown.)
D2 is empty, or may contain any value except "TRUE" (This row is always hidden under the Reorganize rule.)The rest of Row 2 of this table requires the data shown: a number outside the range to be counted (999), and two checkboxes, both checked.
D3 (and filled down the rest of column D): =AND(OR(B2,C2),NOT(OR(B3,C3)))
The formula returns TRUE only for the first unused row in the table (ie. the first row for which neither checkbox has been checked)
Summary table:
Column A contains labels for the age ranges to be counted.
Column B contains the same information in the form necessary for the formulas in columns C and D. They need a numeric value, and that value must be the largest acceptable value in the range to be counted.
C2 (and filled right to column D, then both filled down to row 5):
=COUNTIFS(Data :: $A,"<="&$B,Data :: B,TRUE)-SUM(C$1:C1)
Two changes from the previous example:
COUNTIFS is used to separate the Native and Foreign counts as well as the age range to be counted.
The amount subtracted from each result is the SUM of the earlier results, and includes the text value in the first cell of the column (which is interpreted by SUM as a zero).
See note below regarding my earlier formula.
When the greyed columns are hidden and the checkbox in the Reorganize pane is checked, the two tables will appear as shown below:
Close the reorganize pane, and the 'data entry form' is ready to use.
To use, enter the age first, then check one of the boxes.
As soon as one box is checked, the row will be hidden, and the next (unused) row will be shown.
Regards,
Barry
Note regarding formula in my earlier post:
The earlier formula will give erroneous results as it subtracts only the count directly above it from its count of persons in the age range 0-n.
In E2 of that table, replace "-E1" with "-SUM(E1:E$1)
Fill down to E8.
Ignore the instructions (in that post) following "Fill down to E8."
B -
How can I tell if the mini dvi on my 2010 13" macbook pro supports audio?
How can I tell if the mini dvi on my 2010 13" macbook pro supports audio?
If it's a post 2009 Mac it supports audio on the HDMI port. See:
About Mini DisplayPort to HDMI adapters
Mac mini (Mid 2010)- Frequently asked questions about HDMI -
my airplay from my MacBook Pro to my tv through my apple tv is fuzzy- it just started being fuzzy about 2 months ago- it used to be clear- anyone else have this problem? How can I fix it?
Hi freezebri,
The following steps may resolve your issue:
Apple TV: Basic troubleshooting
http://support.apple.com/kb/ht1551
If your TV screen appears fuzzy or black (you see no video)
Make sure the television you are using supports the Apple TV resolution requirements. Please see the Apple TV technical specifications.
When you connect power, check to make sure the LED turns on. If the LED is not on, then verify with a known good power outlet or connect something else to the outlet you're using for Apple TV and make sure it works (such as a lamp or clock).
Make sure you're using the correct video cables and that they are connected firmly to Apple TV and to your TV.
Connect the HDMI cable directly into the Apple TV and your television, remove any third party devices or adapters.
Make sure the input setting you've selected on your TV matches the input you have your video cables connected to. See the documentation that came with your TV for more information.
Change the Apple TV resolution by pressing and holding the Menu and Up button for six seconds. The Apple TV will automatically cycle to the next resolution at approximately 20 second intervals. Pressing the Selectbutton will immediately cycle to the next resolution.
If you are connected via HDMI, try unplugging and replugging your HDMI cable.
If HDMI isn't working on an Apple TV (1st generation), try component cables instead (and disconnect the HDMI cable temporarily). Read more about HDMI vs component video.
Hope this information helps ...
- Judy -
How can I copy a home movie onto another DVD with my MacBook Pro?
How can I copy a home movie onto another DVD with my MacBook Pro?
That's a proprietary interface.
Odds are there is no adapter. Ask Sony. -
my iphone4s died, mom gave me her old 3gs, i had to get a new sim to fit the 3gs, how can I sync all my old contacts? I have a macbook pro, tech told me that it would sync from my icloud but it has not. Thanks!
Syncing the 3GS is exactly the same as syncing the 4S - so just do the same as you've been doing.
How do you normally sync contacts from your Mac to your iPhone? Via iTunes over USB/WiFi, or via iCloud? -
How can i drag videos off of my iPhone 5 onto my MacBook Pro?
how can i drag videos off of my iPhone 5 onto my MacBook Pro?
you'll need to import them
try using iPhoto, if you don't have iPhoto then you can use image capture. If you can't find image capture type it into the finder. -
How can I tell if my computer (2x2.26 Quad Core Xeon
c Pro) and my Airport Base station(Airport Extreme 1Tb Time Capsule) are Gigabit compatible? I want to add a Cisco switch to the network.
Thansk
Tony BreuerAll Mac Pro's ever made have shipped with gigabit ethernet. The last non-gigabit tower desktop Apple made was the very first generation PowerMac G4's back in 1999.
Similarly, all Time Capsules have been gigabit ethernet as well - never been one that was not. -
How can I please manage to get my contacts back to my MACBOOK PRO. They are completely disappeared after synchronization under iCloud with my iphone s4. Help is very much appreciated. Thx in advance.
Unfortunately there is obviously no one who could help.
I simply logged in over icloud.com and copied the contacts onto my monitor screen..... :-( Not the best idea, I know, but in fact I can look up my contacts.
someone there with a better help??????????????????? -
Can someone connect in FaceTime if they are using a friends Macbook Pro, yet, doens't have an Apple ID?? For example, I have an IPAD and a Macbook Pro. Can I connect to FaceTime on my Macbook Pro and connect with a friend using my IPAD????
I have also tried changing the contact emails(you can contact me by) in Facetime(diff email for IPAD and Macbook Pro). Facetime tried the call, I see the accept buttom appear and it goes away as the call never connects? Any ideas??
Maybe you are looking for
-
Text appearing as white on white on a webpage?
A friend of mine created this website http://www.confinementmovie.com/ but for me in Safari (and Firefox) most of the text appears as white on a white background (i.e. it can't be read unless highlighted with a mouse). He said this isn't true for oth
-
Readonly database and v$ views
I would like to know when a database is open in read only mode, is all v$ views are updated to know performance about it ? example : v$session, v$sysstat... for ratio.
-
Hi, I get many warning event ID 2128 on my HUB server: Process w3wp.exe () (PID=7340). Object CN=job_new,CN=Databases,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=Bleum,CN=Microsoft Exchange,CN=Services,CN=Configurat
-
ADF Mobile - Error deploying to Default Server
Hi I am currently doing an ADF mobile application, I can successfully build and compile the project but then when i run my br-o.jspx i encounter this error: C:\bea\jdeveloper\system\system11.1.1.0.31.52.05\DefaultDomain\bin\startWebLogic.cmd [waiting
-
Classical Music Purchasers Left out in cold by itunes 11
I have been posting this question/complaint everywhere I can about the itunes 11 as have many others. Classical music purchasers apparently can no longer purchase musicbecause the option of listing composer and/or artist and/or piece and/or across a