HT1420 how i can solve error 0x80090318 ??

hi,my personal os in my pc is windows 8,i inestall latest version of itunes but my itunes cant connect to itunes store,i have a real problem with this
every time i got the message error 0x80090318
some times get this
"make sure youre connection is active and try again"

Sadly, it hasn't worked for me, but thanks for the advice. I'm looking at a different theory: can anyone explain why itunes 11.1 is trumpeted as 64-bit, but task manager declares itunes to be 32 bit and gives it a x86 file path? Is my problem that Windows 64 architecture keeps finding itself running up against 32 bit installation?
I've tried a cleanup of Windows Installer (www.support.microsoft.com/mats/Program_Install_and_Uninstall) but I keep getting the problem; no access to iTunes Store.

Similar Messages

HT4305 how i can solve the error 1009

how i can solve error 1009.please teach me step by step

You can't, there is no workaround. You're getting that error because you're trying to purchase content that is not available in the country you are located in. Apple's servers have detected such & have generated that error code.

Hello all .. i have a big problem in my ipad version 5.1.1 that is when i connect the ipad with my computer the i tunes give me this message ( itunes couldnt connect to this ipad .an unknown error occurred (0xE8000012).) how i can solve this problem pleas

hello all .. i have a big problem in my ipad version 5.1.1 that is when i connect the ipad with my computer the i tunes give me this message ( itunes couldnt connect to this ipad .an unknown error occurred (0xE8000012).) how i can solve this problem please
and this is an pic for the problem

There is some troubleshooting for 0xE8 error codes on this page : http://support.apple.com/kb/TS3221 - you could see if anything on that page fixes it

HT201210 when i want to restre the iphone so i can see an error 3194 how i can solve this problem

i am trying to restore the iphone through itunes and i can an error which is 3194 so how i can solve this problem

Check Hosts file of comp. It must point to Apple.
Would have already seen
Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow iTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service.

When i want to download an app in app store give me an error number and i could not down load.how i can solve this error number?

When i want to download an app in app store give me an error number and i could not down load.how i can solve this error number?

Hi Amir.09395340646,
Welcome to the Support Communities!
What app are you trying to download? Is it iPhoto for iOS? What error message are you receiving? The first thing I would suggest is to log out of your iTunes Store account on your iPhone. Then restart the device and log in again.
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/HT1311?viewlocale=en_US
If the above did not resolve your issue, follow the troubleshooting steps in the article below.
The link includes the complete details and screenshots, but I've highlighted a few points for you:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
- Make sure that your iOS software is up to date by connecting your iOS device to iTunes and clicking on Check for Update in your device's Summary page in iTunes.
- Check and verify that you are in range of a Wi-Fi router or base station. If you are on a 3G capable device, make sure that cellular data is turned on from Settings > General > Cellular.
- Check to make sure you have an active internet connection. You can check the User Guide for your device for help with connecting to the internet.
- Check to make sure other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the internet.
- Try resetting (turning off and then on again) your Wi-Fi router
- If the issue still persists see, iOS: Troubleshooting Wi-Fi networks and connections or iOS: Troubleshooting Wi-Fi networks and connections.
I hope this information helps ....
- Judy

How i can solve 6753 airport error

how i can solve 6753 airport error?

IIRC, it's not uncommon to spot this after a firmware update to 7.6.1. And IIRC, wasn't there a 7.6.2 release today? Unplug the express, plug it back in, and generally this should self-resolve.

HT201263 How do I solve error no. 1050? I can't restore my iphone! What do i do next?

How do I solve error no. 1050? I can't restore my iphone! What do i do next?

ERROR 1015...
This Error Code is indicative of the Device being jailbroken / Hacked...
Sorry... But...
The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
You will need to look elsewhere.

What are the varoius type of process chain errors how we can solve them.

Hi,
I need to work with process chains maintainace , Can any body tell me what are the different type of process chain errors generelly we used to get ,how we can solve them . IF possible please provide me any document also so that i can solve my
abnormal problems for process chain errors.
Thanks in advance .

Hi,
1) Invalid characters while loading: When you are loading data then you may get some special characters like @#$%...e.t.c.then BW will throw an error like Invalid characters then you need to go through this RSKC transaction and enter all the Invalid chars and execute. It will store this data in RSALLOWEDCHAR table. Then reload the data. You won't get any error because now these are eligible chars done by RSKC.
2) IDOC Or TRFC Error: We can see the following error at u201CStatusu201D Screen:Sending packages from OLTP to BW lead to errorsDiagnosisNo IDocs could be sent to the SAP BW using RFC.System responseThere are IDocs in the source system ALE outbox that did not arrive in the ALE inbox of the SAP BW.Further analysis:Check the TRFC log.You can get to this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".Removing errors:If the TRFC is incorrect, check whether the source system is completely connected to the SAP BW. Check especially the authorizations of the background user in the source system.Action to be taken:If Source System connection is OK Reload the Data.
For more errors and solutions go thorugh the link below
http://indelasap.blogspot.com/2009/04/sap-bi-production-support-issues.html
Regards,
Marasa.

How do you solve error "You can't use this version of the application Install Mac OS X.app with this version of Mac OS X" when trying to go back to leopard from lion?

How do you solve error "You can't use this version of the application Install Mac OS X.app with this version of Mac OS X" when trying to go back to leopard from lion?
Local Mac shop said to hold down "c" after inserting disk to get "disk utility" to come up in order to wipe hard drive. I can't seem to get it to do this.

This W7 was purchased for using Fusion, as others did - per reviews from amazon. The technician today called their contact at VMWare - Fusion not officially for use with Lion - even though I read at the VMWare support site that others have made it work. Apparently my setup doesn't work.
Do you know how to do the proceedure for bringing up the disk utility when starting the disk?
BTW, some of the windows applications I want to continue using are Incredimail, Calendarscope, Stamps.com and a few others I have used over many years. What do you use for email and calendar?
Wow, sounds like another reason to not use MS Windows.
Regarding your Disk Utility question, please elablorate I'm not sure what you're trying to do. Disk Utilty is just that...a utility, it's something most users never have to use especially on a new computer. Let me know what you're trying to do there before I give you some instructions.
As for as your Windows apps I would recommend using Mail and iCal, both come as part of OS X and are very robust tools. Don't discount the software built right into OS X it's very robust and powerful not all like the bloatware most Windows boxes ship with. Stamps.com well I'd look for another alternative. It's clear they don't support OS X which makes me a little suspicious that they're so behind the times.
Also if you have not been exposed to these links before I'd strongly recommend bookmarking them and using them. They're extermely useful!
Switch 101
Mac 101
Find Out How Video tutorials

I have a problem, from system test says: Error 4mem/61/400000000:0x8444fb98, I know how you can solve. Thanks

I have a problem, from system test says: Error 4mem/61/400000000:0x8444fb98, I know how you can solve.

If you have Apple Care for that computer, give them a call: Apple's Customer Support - in the US, (800) 767-2775
If you're not sure how to handle the situation, consider walking your MB into the nearest Apple Store and asking someone there to take a look, etc.
Good luck in any case.

What is this error and how i can solve this?

I got this error in my alertlog.
ORA-000060: Deadlock detected. More info in file D:\oracle\admin\TEMPDB\udump\ORA06816.TRC.
why this error occur and how i can solve this.

Hi,
Here is the cause and action information about ORA-000060 error
Cause: Your session and another session are waiting for a resource locked by the other. This condition is known as a deadlock. To resolve the deadlock, one or more statements were rolled back for the other session to continue work.
Action: Either:
Enter a ROLLBACK statement and re-execute all statements since the last commit or
Wait until the lock is released, possibly a few minutes, and then re-execute the rolled back statements.
For more information on any error code refer to the Oracle Error Messages Documentation.
Hope this helps.
Sujatha.

TS3694 ?? I have Iphone 3G , when i update software & during iphone restore software 3.1.2. i got error 1602. how i can solve it

?? I have Iphone 3G , when i update software & during iphone restore software 3.1.2. i got error 1602. how i can solve it ?

http://support.apple.com/kb/TS3694#USB

I want to sync tasks in Outlook with my iPhone. I have tried Toodledo (not good) and Todo. Todo works, but it cuts off most of the text. I only get the beginning of my (long) lists. Any ideas how I can solve this problem?

I want to sync tasks in Outlook with my iPhone. I have tried Toodledo (not good) and Todo. Todo works, but it cuts off most of the text. I only get the beginning of my (long) lists. Any ideas how I can solve this problem? I starting to regret that I switched to iPhone...

Usually if you have some kind of hardware failure there is some beeping during POST or most motherboards now have LED indicators to produce and error message based on the type of failure
So if its bad memory, not place properly, mismatched, processor not inserted properly, mismatched voltage or voltage connector not present etc it beeps or generates the error id.
Power supplies can be tested for failure. There are some walk throughs for testing just them with a switch, paperclip or a jumper (I'd suggest not doing this if you are not familiar with the dangers of electricity).
Memory can be tested with memory diagnostics programs like Memtest+
Processors can overheat if the proper precautions have not been taken usually you will get a POST beep or error code for that.
If the motherboard has no response then do the basics first:
Check power connectors and power supply. Once you determine that is not the case move on to other items like graphics cards in all the way or memory.

My dvd player will not let me change regions, it just quits when i do, now its stuck on region 1. Any thoughts how i can solve this problem or get round it in some way?

My dvd player will not let me change regions, it says i have one more chance to change it, then it just quits when i do, now its stuck on region 1. Any thoughts how i can solve this problem or get round it in some way?

Usually if you have some kind of hardware failure there is some beeping during POST or most motherboards now have LED indicators to produce and error message based on the type of failure
So if its bad memory, not place properly, mismatched, processor not inserted properly, mismatched voltage or voltage connector not present etc it beeps or generates the error id.
Power supplies can be tested for failure. There are some walk throughs for testing just them with a switch, paperclip or a jumper (I'd suggest not doing this if you are not familiar with the dangers of electricity).
Memory can be tested with memory diagnostics programs like Memtest+
Processors can overheat if the proper precautions have not been taken usually you will get a POST beep or error code for that.
If the motherboard has no response then do the basics first:
Check power connectors and power supply. Once you determine that is not the case move on to other items like graphics cards in all the way or memory.

How do I solve 'error compiling movie. unknown error'?

how do I solve 'error compiling movie. unknown error' when trying to export? I think a file is damaged or conflicting but how do I know which one?
Also, how did this happen in the first place and how can I avoid it in the future?
Thank you very much!!

BSHF
The answers are in the details which are lacking in your report.
What version of Premiere Elements are you using and on what computer operating system is it running?
Please check out the Adobe troubleshooting documents for this issue
Error "Error compiling movie" during render or export
Troubleshoot damaged projects | Adobe Premiere Elements
After you review those documents and determine if either suggested troubleshooting scheme will work for you,
then we can discuss the immediate and future actions.
Looking forward to your follow up. Depending on your reply, next posts may require of you details
a. project settings
b. properties of your source media
c. edits and inspection of Timeline content with the Timeline expanded with the -+ slider above the Timeline.
More later.
ATR

HT1420 how i can solve error 0x80090318 ??

Similar Messages

Maybe you are looking for