HT1420 I only have 2 computer that are using my ID

I keep getting a error saying that I can only have 5 comuters for my ID. Looked at what I had and I deleted 2 so I only have 3 now and still getting that error message HELP

Where/how have you deleted them ? If from the 'manage devices' section of your account then that doesn't deauthorise a computer, that is done via the Store > Deauthorise This Computer menu option on them - or is that what you've done ?

Similar Messages

  • In my collection I have 500 pictures. In the folder that contains those pictures I have 1000. How do I get the ACTUAL folder to ONLY have the 500 that are in the collection?

    In other words, I want to delete (from my computer) the 500 pictures that are in the folder that are NOT in the collection .....?

    Eroxx1818 wrote:
    I'll try and make it clearer ... I appreciate the help!
    I have a folder on my computer labeled "Wedding Photos."
    I imported that into Lightroom. It had 1000 photos
    Once I imported it, I made a collection called "Wedding" and put those 1000
    photos into the collection.
    Then, in the collection, I went through the process of marking the photos.
    I marked 500 as rejected. But instead of deleting them COMPLETELY from
    Lightroom AND the hard drive, I only deleted them from the LR catalog.
    So, now I have a collection "Wedding" with 500 photos and a folder "Wedding
    Photos" with 1000 photos.
    I only want the 500 photos in the "Wedding Photos" FOLDER.
    Two things ... first, if you use Lightroom to move the un-rejected photos from "Wedding Photos" to some other folder, then you have remaining in the "Wedding Photos" folder only those photos which were rejected and deleted from Lightroom, but not deleted from the hard disk.
    Secondly, there is absolutely no reason to import all the photos from a folder and then create a collection with the exact same photos. This is redundant. It is extra work for no benefit. Since the folder and collection now contain exactly the same 1000 photos, you only need the folder. Anything you want to do with these photos can be done from the folder, as if the collection didn't exist (which it shouldn't in this case).

  • I no longer have the computer that I used to sync my Ipod touch.  So Itunes does nto recognize it.  My Ipod is diabled and locked so i cannot enter the passcode.

    I no longer have the computer I used to sync my Ipod Touch when it was new. Now the Ipod is locked and disabled and Itunes requests me to enter the passcode which I cannot do becasue the Ipod is locked!  Any suggestions?

    If you cannot connect it to the computer to which the device was last connected (or the device was never connected to a computer) you will have to use recovery mode to completely reset the device, losing all data:
    iOS: Unable to update or restore - http://support.apple.com/kb/HT1808 - recovery mode (e.g., cannot connect to computer last used to sync device, iTunes still asks for a password)

  • My account states I'm authorized 5 computers however I only have 2 computers that are working, how do you account for the 3 that are not working

    I have owned 5 computers which had iTunes loaded, however only 2 of the computers actually work.  My account states I'm authorized 5 computers, how do I update my account to indicate that.  The only option I saw was unauthorize all computers

    Mash,
    If a computer is authorized but is discarded withour deauthorizing, it continues to count as an authorized computer. 
    But, it is simple enough to "Deauthorize All" and then re-authorize just the ones that you are still really using.

  • Authorization will not work only have one computer.

    I have 100 songs that no matter how many times I try to authorize, my itunes will not play the song even though after I put my password in it comes back machine authorization was succesful. Then nothing happens. Also only have one computer that I have always had with itunes. Need Help.

    Try getting rid of the SC Info folder mentioned in this article
    http://support.apple.com/kb/TS1389
    If that doesn't work, try DLing the free single of the week. You might need to agree to the new Apple store license agreement.

  • Some of my songs in iTunes show up but they won't play. I get the message that my computer isn't authorized to play them when I only have one computer.

    I recently did the update for iTunes and after I did that I got the error message: MSVCR80.dll file not found.  I followed the suggestions from someone in this community to fix it and now some of my songs aren't playing.  And they are the ones that I purchased from iTunes not CDs that I have and ripped to my iTunes library. I can see the songs listed in my iTunes library as well as on my iPod but yet they won't play.  On my computer I get the message that this computer is unauthorized to play them and to authorize it.  I only have one computer, so I have no idea why I'm getting this message.  And does anyone have any suggestions as to how to get all of the iTunes songs to play again?

    Hello Angel82co,
    It sounds like you have some songs in your library that are not playing, and when you try to play them you are being told the computer is not authorized to play them. I would start by verifying that your computer is still authorized, and take note of the Apple ID that you sign in with:
    To authorize a computer, follow these steps:
    Open iTunes.
    Choose Store > Authorize This Computer from the menu bar.
    You may need to show the menu bar to see this option in Windows. In earlier versions of iTunes, you can access this option from the Advanced menu.
    Enter your Apple ID and click Authorize.
    If your Apple ID uses an expired MobileMe account, you can still authorize your computer.
    From: iTunes Store: Authorize or deauthorize your Mac or PC
              http://support.apple.com/kb/ht1420
    If the issue persists, next I would use the following article to double check that these songs were purchased under the same Apple ID you used to authorize the computer:
    Recovering a forgotten iTunes Store account name
    http://support.apple.com/kb/ht1920
    Open iTunes
    Highlight one of the items you have purchased (You can find your purchases in your Purchases playlist).
    Choose File > Get Info.
    Click the Summary tab.
    The Account Name area will list the account used to purchase the item. Unless you have changed accounts, this is your iTunes Store account name.
    If it is the same Apple ID then I would next delete the song, and re download it from your purchased history, with this article named:
    iTunes 11 for Windows: Download previous purchases from the iTunes Store
    http://support.apple.com/kb/PH12491
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • I bought a new computer and tried to authorize it.  It states that I already have 5 computers that are authorized.  I no longer have any of those 5 computers.  How do I deauthorize all of them, as it is not shown as an option, as my new computer can'

    I bought a new computer and tried to authorize it.  It states that I already have 5 computers that are authorized.  I no longer have any of those 5 computers.  How do I deauthorize all of them, as it is not shown as an option, as my new computer since it is not authorized.
    Thanks

    You can de-authorize individual computers, but only by using those computers. The only other option is to "de-authorize all" from your iTunes account.
      1. Open iTunes on a computer
      2. From the Store menu, select "View my Account..."
      3. Sign in with your Apple ID and password.
      4. Under "Computer Authorizations" select "De-authorize All".
      5. Authorize each computer you still have, as you may require.
    You may only do this once per year.
    After you "de-authorize all" your authorized computers, re-authorize each one as required.
    If you have de-authorized all computers and need to do it again, but your year has not elapsed, then contact: Apple - Support - iTunes - Contact Us.
    For more information on authorization and de-authorization: iTunes Store- Authorize or deauthorize your Mac or PC.

  • SharePoint 2013 - Server Error in '/' Application - This operation can be performed only on a computer that is joined to a server farm by users who have permissions in SQL Server to read from the configuration database

    Hi
    After I ran SharePoint configuration wizard successfully to upgrade to SharePoint 2013 / SP1.
    I can open Central Administration site just fine.
    but now when I open any Site collection,  I got this error.
    Server Error in '/' Application
    This operation can be performed only on a computer that is joined to a server farm by users who have permissions in SQL Server to read from the configuration database. To connect this server to the server farm, use the SharePoint Products Configuration
    Wizard, located on the Start menu in Microsoft SharePoint 2010 Products
    I have restarted all the servers:  SQL server, WFE and APP servers but still cann't get this resolve.
    Services on all servers are running,  IIS - application pools are running.
    Can someone help with where that could be a problem or if there is a solution.
    Thanks in advance for your comments or advices.
    Swanl

    Please verify the followings:
    Make sure that from the SharePoint front end and application servers that you can ping your SQL server.
    Make sure that your Farm account has permission to the configuration database.
    Lastly verify that your database didn't for some reasons go into recovery mode.
    once everything is fine and you are still having issues, restart the SQL host service on the SQL server.
    Once the service is restarted you will need to reboot Central Admin and then your front end servers.
    In addition, as you built your farm inside the firewall, please disable the firwall, or create rules for SQL Server service in the firwall on SQL server.
    More information about creating rules in firewall, please refer to the following posts: http://social.technet.microsoft.com/Forums/en-US/c5d4d0d0-9a3b-4431-8150-17ccfbc6fb82/can-not-create-data-source-to-an-sql-server http://www.mssqltips.com/sqlservertip/1929/configure-windows-firewall-to-work-with-sql-server/
    Here is a similar post for you to take a look at: http://social.technet.microsoft.com/Forums/en-US/ea54e26c-1728-48d4-b2c5-2a3376a1082c/this-operation-can-be-performed-only-on-a-computer-that-is-joined-to-a-server-farm-by-users-who-have?forum=sharepointgeneral 
    Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.

  • I have another computer that a virus may have taken over and I cannot log into it anymore.  I just downloaded Itunes on a new computer but most of my songs are not on there.  Is there a way to still access or find those songs?  Remotely or another way?  I

    I have another computer that a virus may have taken over and I cannot log into it anymore.  I just downloaded Itunes on a new computer but most of my songs are not on there.  Is there a way to still access or find those songs?  Remotely or another way?  Or do I need to take it to a tech to get my files off of my hard drive?

    Edit > Preferences > Store check Music under Automatic Downloads.
    Open the iTunes Store from left hand column, then select Purchasedfrom the column on the right, click the Not In My Library button and select the tunes you want to download again.
    That said, you seem to be under a misapprehension as to how iTunes works, or at least how it has worked in the past. It has, until recently, been up to you take care of your purchases once they have been downloaded. You had a one-time download which you were reminded to back up. With the recent change to this policy you can at least download your store purchases again, but having a personal backup of your iTunes store purchases, stuff purchased elsewhere and files ripped from your CDs will still be preferable to gathering all the stuff together again in the event of a disaster.
    For a backup strategy see this User Tip.
    tt2

  • HT1849 I have received notification that  the "Complete My Album", Music Speaks by Candice Glover is now available to download.  I have three devices that are all enabled to receive automatic downloads.  My problem is the same on all three devices.  Only

    I have received notification that  the "Complete My Album", Music Speaks by Candice Glover is now available to download.  I have three devices that are all enabled to receive automatic downloads.  My problem is the same on all three devices.
    Only 0.05 minutes download on each song with the exception of the original song purchase: I Am Beautiful.  What needs to be done to solve this problem?

    It seems that I have solved my issue by performing a full factory reset (erasing all content, something which I had hoped to avoid) restoring from an iCloud backup did not alleviate the issue, I had to set up as a new iPad.
    Hopefully anyone else else who has this issue in the future will be able to find this.

  • My macbook pro keeps saying I have 450 gigabytes out of 500 that are used.  But when I look on finder there are no files that are anywhere close to that amount.  I went through and deleted files from my mac and now I only have 10 gs free

    My macbook pro keeps saying I have 450 gigabytes out of 500 that are used.  But when I look on finder there are no files that are anywhere close to that amount.  I went through and deleted files from my mac and now I only have 10 gigabytes of additional space free. My mac now says I have 440 gigs of other that is used. But does not make sense, do I have a virus?

    Since you have not identified the OS your MBP is using, these extract may or may not assist you.
    http://pondini.org/OSX/LionStorage.html
    http://pondini.org/OSX/DiskSpace.html
    You may also download from the Internet OmniDiskSweeper (free) and open it it will show all of the files on your MBP and the respective sizes.
    ciao.

  • SP 2013 - Error: This operation can be performed only on a computer that is joined to a server farm

    Hello Community!
    I am working with SharePoint 2013 and I built a farm inside the firewall.  Then a decision was made to move the two WFE's to the DMZ.  Since that time, whenever I try to access the site collections, I get the error below.  Other information: All
    the web applications are on port 80, but I'm not having any problem with accessing Central Administration which is on port 8080; the network team did screw up the DNS originally, but I'm told it's correct now; the two WFE's servers show in my Manage servers
    on the Farm interface 2X, once with the server name, once with the fully Qualified Domain Name, the ones with the FQDN shows a Services Running status of Not Configured.
    Has anyone else ever seen this error and if so please provide guidance and instruction for fixing the error.
    Thanks!
    Tom
    Server Error in '/' Application.
    This operation can be performed only on a computer that is joined to a server farm by users who have permissions in SQL Server
    to read from the configuration database. To connect this server to the server farm, use the SharePoint Products Configuration Wizard, located on the Start menu in Microsoft SharePoint 2010 Products.
    Description:
    An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the
    code.
    Exception Details: System.InvalidOperationException: This operation can be performed only on a computer that is joined to a server farm by users who have permissions in SQL Server to read from the configuration database. To connect this server
    to the server farm, use the SharePoint Products Configuration Wizard, located on the Start menu in Microsoft SharePoint 2010 Products.
    Source Error:
    An unhandled exception was generated during the   execution of the current web request. Information regarding the origin and   location of the exception can be identified
    using the exception stack trace   below.  
    Stack Trace:
    [InvalidOperationException: This operation can be   performed only on a computer that is joined to a server farm by users who   have permissions in SQL Server to read from the configuration
    database. To   connect this server to the server farm, use the SharePoint Products   Configuration Wizard, located on the Start menu in Microsoft SharePoint 2010   Products.]
         Microsoft.SharePoint.Utilities.SPUtility.AlternateServerUrlFromHttpRequestUrl(Uri   url) +262
         Microsoft.SharePoint.Administration.SPAlternateUrl.GetContextUri(HttpContext   ctx) +385
         Microsoft.SharePoint.SPAppRequestContext.InitCurrent(HttpContext context)   +1013
         Microsoft.SharePoint.SPAppRequestContext.get_Current() +175
         Microsoft.SharePoint.SPGlobal.CreateSPRequestAndSetIdentity(SPSite site,   String name, Boolean bNotGlobalAdminCode, String strUrl, Boolean   bNotAddToContext, Byte[] UserToken,
    SPAppPrincipalToken appPrincipalToken,   String userName, Boolean bIgnoreTokenTimeout, Boolean bAsAnonymous) +400
         Microsoft.SharePoint.SPRequestManager.GetContextRequest(SPRequestAuthenticationMode   authenticationMode) +120
         Microsoft.SharePoint.Administration.SPFarm.get_RequestAny() +370
         Microsoft.SharePoint.SPLanguageSettings.GetGlobalInstalledLanguages(Int32   compatibilityLevel) +39
         Microsoft.SharePoint.Administration.SPTemplateFileSystemWatcher.RefreshInstalledLocales()   +103
         Microsoft.SharePoint.Administration.SPTemplateFileSystemWatcher.Initialize()   +130
         Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.System.Web.IHttpModule.Init(HttpApplication   app) +873
       System.Web.HttpApplication.RegisterEventSubscriptionsWithIIS(IntPtr   appContext, HttpContext context, MethodInfo[] handlers) +582
         System.Web.HttpApplication.InitSpecial(HttpApplicationState state,   MethodInfo[] handlers, IntPtr appContext, HttpContext context) +322
         System.Web.HttpApplicationFactory.GetSpecialApplicationInstance(IntPtr   appContext, HttpContext context) +384
         System.Web.Hosting.PipelineRuntime.InitializeApplication(IntPtr appContext)   +397
    [HttpException (0x80004005): This operation can be performed only on a computer that is joined to a server farm by users who have permissions in SQL Server to read from the configuration database. To
    connect this server to the server farm, use the SharePoint Products Configuration Wizard, located on the Start menu in Microsoft SharePoint 2010 Products.]
         System.Web.HttpRuntime.FirstRequestInit(HttpContext context) +646
         System.Web.HttpRuntime.EnsureFirstRequestInit(HttpContext context) +159
       System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest   wr, HttpContext context) +771
    Version Information: Microsoft .NET Framework Version:4.0.30319; ASP.NET Version:4.0.30319.18010
    Tom Molskow - Senior SharePoint Architect - Microsoft Community Contributor 2011 and 2012 Award -
    Linked-In - SharePoint Gypsy

    Hi Tom,
    According to your description, my understanding is that you got an error when you moved your SharePoint.
    This error occurs when the SharePoint farm administrator cannot connect to your configuration database. Please verify the followings:
    Make sure that from the SharePoint front end and application servers that you can ping your SQL server.
    Make sure that your Farm account has permission to the configuration database.
    Lastly verify that your database didn't for some reasons go into recovery mode.
    once everything is fine and you are still having issues, restart the SQL host service on the SQL server. Once the service is restarted you will need to reboot Central Admin and then your front end servers.
    In addition, as you built your farm inside the firewall, please disable the firwall, or create rules for SQL Server service in the firwall on SQL server. More information about creating rules in firewall, please refer to the following posts:
    http://social.technet.microsoft.com/Forums/en-US/c5d4d0d0-9a3b-4431-8150-17ccfbc6fb82/can-not-create-data-source-to-an-sql-server
    http://www.mssqltips.com/sqlservertip/1929/configure-windows-firewall-to-work-with-sql-server/
    Here is a similar post for you to take a look at:
    http://social.technet.microsoft.com/Forums/en-US/ea54e26c-1728-48d4-b2c5-2a3376a1082c/this-operation-can-be-performed-only-on-a-computer-that-is-joined-to-a-server-farm-by-users-who-have?forum=sharepointgeneral
    I hope this helps.
    Thanks,
    Wendy
    Wendy Li
    TechNet Community Support

  • I have 6 apps that are on waiting how to I fix that please help

    I have 6 apps that are on waiting how to I fix that please help

    See if any of these suggestions work for you.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
    If that doesn't work - sign out of your account, restart the iPad and then sign in again.
    Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Go back to Settings>iTunes & App Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream.
    You can also try deleting the waiting icons - tap and hold down on an icon until it wiggles - the tap the X on the icon to delete it. Then try to download again.
    You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered.
    If all else fails, download the updates or the apps in iTunes on your computer and then sync the content to your iPad.

  • 'this action is only valid for products that are currently installed'

    hi im new to discussion groups so i might be a little slow... i came aross a problem a couple of days ago where when i clicked on itunes this came up'this action is only valid for products that are currently installed' im not really sure what to do about it!i have tried to uninstall it but it wont let me i have also tried to install a new itunes but it gets stuck and never finishes the install. i have done some research on the net about it and i think it may have occured due to deleting mcafee of my computer however there are no solutions to this problem.
    can anybody help?
    thanks!

    Every time I try to open iTunes a pop up opens
    that says "This action is only valid for products
    that are currently installed."
    that's actually an installer error equivalent
    to the InstallShield 1605 error:
    Error 1605: This action is only valid for
    products that are currently installed
    ... when you go to launch itunes, are you opening it
    via the start menu, or are you clicking on a desktop
    icon? if you are clicking on a desktop icon, what is
    it called, and what does the icon look like?
    Never Mind! But Thanks any way

  • Office 2013 - Excel 2013 - "This action is only valid for products that are currently installed."

    I had Office 2010 starter and Outlook 2010 installed.  I recently purchased the Office 2013 click to run version (paid monthly subscription) and installed Office 2013.  After installing 2013 I noticed that when I opened up Excel files they would
    still open in Office 2010.  I uninstalled Office Starter 2010 and uninstalled Outlook 2010.
    I then manually fixed the file associations for Word, PowerPoint, Publisher and such, however I could not manually fix the Excel file association. 
    Excel documents show the correct icon however when I double click on them the following error appears "This action is only valid for products that are currently installed."
    I have used the Office 2013 repair process, I have uninstalled and reinstalled Office 2013, I have manually uninstalled office 2013 using KB 2739501 (
    http://support.microsoft.com/kb/2739501/en-us ) and I still can not open Excel documents. 
    Recently I found that I can not do mail merges either using Excel documents as the data source and I believe the two items are related.
    Any suggestions?

    Hi,
    Please try to turn off compatibility mode and then check the issue again. To do this, please follow:
    1. Open this folder location:
    For Windows 32-bit: C:\Program Files\Microsoft Office\Office15
    For Windows 64-bit: C:\Program Files (x86)\Microsoft Office\Office15
    2. Find Excel.exe, right-click it, and choose Properties.
    3. Click on the Compatibility tab and ensure that all of the boxes are
    un-checked.
    For more information, please refer to this:
    http://support.microsoft.com/kb/2674519/en-us
    Thanks,
    Steve Fan
    TechNet Community Support

Maybe you are looking for