HT1420 if upgrading to windows 8, will i have trouble reloading itunes?

if upgrading to windows 8, will i have trouble reloading itunes?

Hi 3backpacker3,
It sounds like you are on the right track in troubleshooting this issue. If you are having launch issues, you may find the following article helpful:
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/ts1717
Regards,
- Brenden

Similar Messages

  • If I upgrade to Snow Leopard, will I have to re-install software such as Logic Studio?

    If I upgrade to Snow Leopard, will I have to re-install software such as Logic Studio? Do I lose EVRYTHING?

    You normally will not lose anything, but you may have to reinstall some applications since some applications place files in locations that may not be carried over to the new installation. Logic Studio may well fall into this category, though I don't know for sure. You should confirm compatability of your applications with Snow Leopard before you upgrade, since some applications may require upgrading to work properly (or at all). You should also have a good backup - I usually suggest making a complete clone of your current hard drive to an external drive - before attempting the upgrade.
    Regards.

  • HT1420 How can i deauthorize a computer that once was authorized then I had to reinstall (windows 7) like 3 times and reload itunes reach time to get this authorization crap. I only have 3 computers actually authorized. This one is the 4th. This is ridicu

    How can i deauthorize a computer that once was authorized then I had to reinstall (windows 7) like 3 times and reload itunes reach time to get this authorization crap. I only have 3 computers actually authorized. This one is the 4th. This is ridicules.

    If you've got 5 computers authorised for the account in question, and you need to free up authorizations, I'd do a "Deauthorize All" from one of the computers you have access to, and then reauthorize the computers you have access to.
    For instructions, see the following document:
    iTunes Store: About authorization and deauthorization
    (Best to deauthorise a computer before you reinstall the OS on it.)

  • I upgraded to mountain lion and now have nothing in itunes, why

    i upgraded to mountain lion and now have nothing in itunes, why

    About TM "Backup Drive is Full"
    Alert TM only deletes older files if they have been deleted from the source and when TM needs space on the backup drive for a new incremental backup. Time Machine "thins" it's backups; hourly backups over 24 hours old, except the first of the day; those "daily" backups over 30 days old, except the first of the week. The weeklies are kept as long as there's room.
    So, how long a backup file remains depends on how long it was on your Mac before being deleted, assuming you do at least one backup per day. If it was there for at least 24 hours, it will be kept for at least a month. If it was there for at least a week, it will be kept as long as there's room.
    Note, that on a Time Capsule the sparsebundle grows in size as needed, but doesn't shrink. Thus, from the user's view of the TC it appears that no space has been freed, although there may be space in the sparsebundle.
    Once TM has found it cannot free up enough space for a new backup it reports the disk is full. You can either erase the backup drive and start your backups anew or replace the drive with a larger drive.

  • T will it have 2 different itune libraries? Or do we have to share 1?

    I am trying to back up a 2 iphone onto one computer. But will it have 2 different itune libraries? Or do we have to share 1?

    This is up to you and not determined by the iPhone.
    You can sync each iPhone with the same iTunes library and each iPhone has its own sync preferences with iTunes, or you can have more than one iTunes library with iTunes on your computer. This will require constantly logging in and and out of each iTunes library on your computer with iTunes depending on the iPhone being synced with iTunes.

  • When I click on the button to download the new IOS software, I get a message saying that all the items on my iTouch will be removed.  Will I have to reload everything after updating the software?

    When I click on the button to download the new IOS software, I get a message saying that all the items on my iTouch will be removed.  Will I have to reload everything after updating the software?  Because I had to have my hard drive wiped a while back, I have items on my iTouch that are not in my iTunes.  Is there a way to copy everything on the iTouch into iTunes, if necessary, before I load the new software?

    It is possible to transfer purchases from your iPod back into iTunes before updating the OS. If you had any CDs from your personal collection, these you have to put back into iTunes manually. Hope this helps you & good luck!

  • Upgrading to Windows 8, will certain HP features be updated for this in the (near) future?

     1. Product Name and Number
         • HP Elitebook 8570w Workstation
     2. Operating System installed (if applicable) 
         • Windows 7 64-bit
    Hey guys,
    I want to update to Windows 8 on my notebook and thus I ran the Windows 8 Upgrade Assistant.
    Spoiler (Highlight to read)
    Secure Boot isn't compatible with your PC
    Your PC's firmware doesn't support Secure Boot so you won't be able to use it in Windows 8.
    More info
    Broadcom Bluetooth Software
    Broadcom Corporation
    Go to the app website for help
    Dual-Core Optimizer
    AMD
    Not compatible
    Embedded Security for HP ProtectTools
    Hewlett-Packard Company
    Not compatible
    Intel(R) USB 3.0 eXtensible Host Controller Driver
    Intel Corporation
    Not compatible
    Secure Boot isn't compatible with your PCYour PC's firmware doesn't support Secure Boot so you won't be able to use it in Windows 8.More infoBroadcom Bluetooth SoftwareBroadcom CorporationGo to the app website for helpDual-Core OptimizerAMDNot compatibleEmbedded Security for HP ProtectToolsHewlett-Packard CompanyNot compatibleIntel(R) USB 3.0 eXtensible Host Controller DriverIntel CorporationNot compatible
    Which gave me the result in the spoiler. I'm especially keen on the HP ProtectTools because I love the fingerprint login featurer. I'm also not so sure what missing the USB 3.0 eXtensible Host and Dual-Core Optimizer will mean for me.
    Does anybody know if these things will work on Windows 8 Pro (regardless what the Update Assistant says), or if not, if it will be solved in the future, or if not, what problems it will give me.
    Thanks!
    Robin

    I have the HP-Pavilion VA284AAR-ABA IQ546T Touchscreen All-in-one
    It originally shipped with Vista, but during the period you could upgrade to Windows 7, which I did as soon as I got it. I love it (only wish it had HDMA out, but that is another issue).
    Just upgraded to Windows 8 Pro using their donload Upgrade system. It ran great. Worked like my android tablet with regards to touchscreen capability. Could swipe to get the sidebar with search charms on the right and swipe from the left to get other open windows, It was truley wonderful. Then while looking at some settings functions there was a suggestion that my computer preformance was lagging and I should refresh my system.
    First of all when I think of the word refresh, I think about splashing a little seabreaze on my face,,,that is refreshing. What happened to my computer after hitting refresh was more like Brad Pitt getting a facelift to look like me. Not Happy.
    Now none ot the touchscreen features work other than moving and hitting tiles. Gone is the ability to swipe to mover the entire screen to the right or left or up and down. No more opening the charms bar with a right side swipe. It is like the touchscreen only works halfway. I know this is an old machine in Tech terms, but I know it will work, because it did. Please offer drivers under windows 8 to restore full functionality of the touchscreen to this product. I know your web sight says that there are limitations to the touch features because of the bezel, but I know it works, I 've seen it work and it was a thing of beauty. ( I tried restore, but ther is no restore point prior to refresh) Please warn others about the evils of the refresh option ant to try to establish a restore point before that. Lonng time HP buyer and supporter, please help.

  • Windows 8 FAQ: After upgrading, what Operating System will I have after Windows 8 Repair?

    Question:
    Once I upgrade to Windows 8, if I need to send my PC back to HP for hardware repair, what operating system will be running on my system?
    Answer:
    For most repairs, the PC will be returned with the Windows 8 operating system intact.  However, if the system repair requires, for example, a new PC hard drive, then a re-image of the PC will be required, and the original shipping operating system will be re-installed

    No Message. Please refer to the solution above.

  • Dualbooting/Upgrading to Windows 8 - Will it Change My Bootloader?

    Hey all,
    I'm currently dualbooting Arch along with Windows 7 on my laptop and I'm booting through grub right now which was installed with my arch installation. That being said, I'm currently thinking about upgrading my windows 7 system to windows 8 without a reinstall but rather through the regular upgrade process. I was just wondering if anyone had an idea of whether this would mess with my bootloader and overwrite it and if so whether I could just use the windows 8 bootloader to boot into arch or if I would have to reinstall grub and if so what the best way to do that would be. Thanks in advance!

    drcouzelis wrote:I'm curious about this as well.
    Don't be - save your braincells for stuff that matters.
    drcouzelis wrote:My coworker was trying to convince me that Windows 8 won't automatically overwrite my bootloader, but I didn't wan't to take any chances. Even if it does, I suppose it's just a quick boot into an Arch Linux live CD, use arch-chroot, and reinstall GRUB2 to fix it.
    If your bootloader is in MBR it will be mashed by W8 (from experience - no hearsay involved) ... MS are unlikely to ever relinquish any control over what happens there Chroot is king!
    drcouzelis wrote:Anyway, then I realized my computer, in it's four year lifetime, has never had Windows on it and am not really THAT interested in trying it.
    Retain that dis-interest and hold it close...

  • How do we install the upgrade on windows if if we have acrobat 8 to start with?

    Hi WE have Acrobat 8 pro and wish to upgrade to our new OS windows 7 by purchasing Acrobat X pro but obviously we can't install and run Acrobat 8 on windows 7 so how do we install the upgrade without first installing the earlier version?

    Our Acrobat 8 is an upgrade version for version 7 which we have also.  Its a business and we have been upgrading for years.  But changing the OS has caused a big problem for us as older software that has been upgraded over the years will not install.
    So will the version 8 Serial number still work?

  • Since I had my computer upgraded to Windows 7 I had to re install itunes. My itunes library has disappeared and my ipod is no longer syncing music from itunes. Any ideas what I can do?

    since I had my computer upgraded to Windows 7  i had to reinstall itunes. my music library disappeared and my ipod classic no lnger synces music from itunes. what can I do?

    You may refer to this tutorial, it's about how to fix iTunes sync problem with iPod. Hope it helps. Feel free to email me if you need further help.

  • Windows 7 will not launch after installing itunes 11.1.5.

    I initially tried updating itunes but it wouldn't so I uninstalled all Apple products in order per another post I found. Then reinstalled all products and itunes worked fine. I then shut down my computer for the night, then next day windows wouldn't launch.  I did a system restore prior to the itunes update and windows works fine.  I tried reinstalling itunes again and had the same problem.  So now I don't have itunes installed. Anyone know how to get itunes to not prevent windows 7 from launching?

    My MBP (15", early 2009 model, 8GB RAM, 1TB internal drive) showed in Software Update as not needing any other updates, and I downloaded from Apple's site directly and installed iTunes 11.1.5 rather than doing it via Software Update (I've had some glitches with the 'direct' install from SU in the past, so I manually download updates from Apple's support website instead).
    Hoping Apple will figure out what's wrong with this version under 10.6.8...

  • G500 laptop upgraded to windows 8.1 now have a message missing a driver

    My G500 laptop just upgraded to Windows 8.1 and now my alert action center message tray says I am missing a driver?
    I can’t find anything missing? I looked through all the devices 5 times but nothing is marked with a question mark or similar?
    Any thoughts?

    Hi deagonslair2013
    What you describe has been happening since the preview, Because all devices on a network talk to each other the driver error may not be on your G500 but on another device on the network.
    For instance: I own a G700 & G505, I connected a tablet to the G505 & it installed the device but could not find any drivers for that device, Since then my G700 has been showing a driver missing although all devices are working fine on the G700 in device manager.
    If you have any other laptops or desktops on your network with device drivers missing disable those devices & re-run the hardware scan on your G500 & see if that is the cause.
    Edit What version of Lenovo solution center do you have installed, It should be version 2.3.002.
    If your version has a .18 in the string its out of date & you need to update to the above version.
    Hope that helps!
    And welcome to the forum.
    Catt

  • Upgraded to Windows 10 now I have no sound

    I did the free home upgrade to Windows 10 and now the hardware has changed.  
    I have a different audio which "it" says is working fine but I have no sound at all.  Nothing, Nada, Zip. I cannot find the 'control panel' to even begin to try to work it back, nor do I appear to have the original sound hardware loaded.  
    ARGGGGHHHH  
    Help.
    I wish I'd never done the upgrade.
    Also, is there a touchscreen driver so I can use my probook with windows 10 or am I still stuck with the mouse.

    I have the exact same problem. I bought an HP Pavilion All-in-One -23-q014 (Touch) yesterday and installed the free upgrade to Windows 10 during the installation process. Everything seems to be working fine, except I have NO sound at all. I already updated the Realtek driver through the Device manager and Windows says its up to date and working fine, but still NO sound. Please help. 

  • TS3212 windows dep will not let me run itunes

    windows vista will not let me open i tunes dep message can anyone help please

    Try updating your QuickTime Player to the most recent version. Does that clear up the DEP errors in iTunes?

Maybe you are looking for

  • Restricting Size of Time Machine Backup on Firewire Connected Drive

    I've got an external 1 TB drive connected via FW800. Time Machine works fine, but I am also using this as a shared drive and want to limit the size of my Time Machine (to 600G for now) without having to formally partition the drive. I've read all the

  • Retrieving password for a game center ID?

    Hi! My son has a 4th generation iPod touch. It's set up via my Apple ID so I can be in control of what he installs, etc.  He started playing games that required a Game Center login, so he created one on the iPod (via the Game Center app). It let him

  • Got an error while setting up account after reset password: "Wrong user name or password"

    Firefox Sync I've perform "Reset password" operation and tryed to set up Sync again - and got an error "Wrong user name or password". After resetting password once more error still remains. This affect after I've update my Firefox to version 8.0.

  • "No recipients are set in [Recipient List]" -- Can't print to pdf!

    Since I upgraded to 10.5.7 a few weeks ago, I can't print to pdf. It seems that the upgrade might not be compatible with the workflows. I generated a new workflow as plug in, same error message: "No recipients are set in [Recipient List]" I am at a l

  • How do I run 4000 series ADAM Modules in LabView

    I am trying to operate up to 4 ADAM modules (2 x 4024, 1 x 4012 and 1 x 4060) through LabView 6i running on Windows XP. I have tried to download and use a copy of the Advantech 32-bit LabVIEW driver from a foreign, non advantech website but when inst